SAMSUNG HW-Q910D Wireless Subwoofer System User Guide

SAMSUNG HW-Q910D Wireless Subwoofer System

  Specifications

• Model: HW-Q910D / HW-Q850D
• Manufacturer: Samsung
• Country of Origin: South Korea
• Power Source: AC/DC
• Voltage: AC/DC
• Color: Black

Product Usage Instructions

Accessing User Guide To access the User guide, follow one of the methods below:

1. Scan the QR code on the left side of the product.
2. Visit Samsung’s online customer support center and download the manual in document format from Samsung’s website at http://www.samsung.com/support.

Safety Information Read and follow all safety warnings and instructions provided in the manual carefully before using the unit. Some key safety instructions include:

• Do not remove the cover or back of the product. Refer servicing to qualified personnel.
• Avoid contact with internal parts to prevent electric shock.
• Keep the product away from water and ensure proper ventilation.

Important Notes Make sure to read, keep, and follow all the operating instructions for safe and proper use of the product. Some important points to remember:

1. Heed all warnings and follow instructions carefully.
2. Clean the product with a dry cloth only.
3. Avoid blocking ventilation openings.
4. Refer all servicing to qualified personnel if needed.
5. Unplug the apparatus during lightning storms or prolonged periods of non-use.

For detailed installation instructions and additional safety guidelines, refer to the user manual provided.

Frequently Asked Questions

Q: How do I clean the product?

A: Use a dry cloth to clean the product. Do not use any liquid or cleaning agents.

Q: What should I do if the product is exposed to rain or moisture?

A: If the product has been exposed to rain or moisture, unplug it immediately and do not use it until it has been inspected by qualified service personnel.

Q: Can I move the product without following specific instructions? A: Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer to avoid injury from tip-over when moving the product.

Figures and illustrations in this Simple User Guide are provided for reference only and may differ from actual product appearance

HW-Q910D / HW-Q850D

You can access the User guide on Samsung’s on-line customer support center by scanning the QR code on the left.
To see the manual on your PC or mobile device, download the manual in document format from Samsung’s website. (http://www.samsung.com/support)

© 2024 Samsung Electronics Co., Ltd. All rights reserved.

Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care Center.

HEADQUARTERS
Samsung Electronics Canada Inc. 2050 Derry Road West, Mississauga, Ontario L5N 0B9 Canada
TEL: 1-800-SAMSUNG (1-800-726-7864)
www.samsung.com/ca/support

CANADA
1-800-SAMSUNG(726-7864)
www.samsung.com/ca/support (English)
www.samsung.com/ca_fr/support (French)

U.S.A
1-800-SAMSUNG (726-7864)
www.samsung.com/us/support

SAFETY INFORMATION

SAFETY WARNINGS
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK).
NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Refer to the table below for an explanation of symbols which may be on your Samsung product.

WARNING

• To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
• To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions.

CAUTION

• Do not expose this apparatus to dripping or splashing. Do not put objects filled with liquids, such as vases, on the apparatus.
• To turn this apparatus off completely, you must pull the power plug out of the wall socket. Consequently, the power plug must be easily and readily accessible at all times.

CAUTION (for Canada)

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.
This device may automatically discontinue transmission if there is no information to transmit, or an operational failure. Note that this is not intended to prohibit the transmission of control or signaling information or the use of repetitive codes where required by the technology. This Class B digital apparatus complies with Canadian ICES-003.

Radiation Exposure Statement
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator & your body.

Important Safety Instructions

Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep these operating instructions handy for future reference.

1. Read these instructions.

2. Keep these Instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9. Do not hinder in any way the safety purpose of the polarized or grounding-type plug.
   A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus
    When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

PRECAUTIONS

1. Ensure that the AC power supply in your house complies with the power requirements listed on the identification sticker located on the bottom of your product. Install your product horizontally, on a suitable base (furniture), with enough space around it for ventilation (3~4 inches). Make sure the ventilation slots are not covered. Do not place the unit on amplifiers or other equipment which may become hot. This unit is designed for continuous use.
   To fully turn off the unit, disconnect the AC plug from the wall outlet. Unplug the unit if you intend to leave it unused for a long period of time.

2. During thunderstorms, disconnect the AC plug from the wall outlet. Voltage peaks due to lightning could damage the unit.

3. Do not expose the unit to direct sunlight or other heat sources. This could lead to overheating and cause the unit to malfunction.

4. Protect the product from moisture (i.e. vases), and excess heat (e.g. a fireplace) or equipment creating strong magnetic or electric fields. Unplug the power cable from the AC wall socket if the unit malfunctions. Your product is not intended for industrial use. It
   is for personal use only. Condensation may occur if your product has been stored in cold temperatures.
   If transporting the unit during the winter, wait approximately 2 hours until the unit has reached room temperature before using.

5. The battery used with this product contains chemicals that are harmful to the environment. Do not dispose of the battery in the general household trash. Do not expose the battery to excess heat, direct sunlight, or fire. Do not short circuit, disassemble, or overheat the battery. CAUTION : Danger of explosion if the battery is replaced incorrectly. Replace only with the same or equivalent type.

CHECKING THE COMPONENTS

• Soundbar Main Unit
• Soundbar Remote Control / Batteries
• Subwoofer
• Power Cord X 2 (Subwoofer, Soundbar)
• HDMI Cable
• Wall Mount Guide
• Holder-Screw X 2
• Screw (M4 x L10) X 2
• Bracket-Wall Mount X 2
• Rubber-Foot X 4
• Wireless Surround Speaker SET (PS-RQ910D)
  • Wireless Receiver Module
  • Surround Speaker X 2
  • Power Cord
  • Speaker Cable X 2

NOTE

• For more information about the power supply and power consumption, refer to the label attached to the product. (Label: Rear of the Soundbar Main Unit)
• To purchase additional components or optional cables, contact a Samsung Service Center or Samsung Customer Care.
• The number of power cables may differ with the model.

PRODUCT OVERVIEW

Top Panel of the Soundbar

Bottom Panel of the Soundbar

CONNECTING THE SOUNDBAR

Connecting the power and units

The LINK LED indicator stops blinking and glows a solid blue when a connection is established between the Soundbar, Subwoofer, and Surround speakers.

Connecting a Wireless Surronud Speaker

1. Connect the Wireless Receiver Module to 2 Surround Speakers Use the speaker cables to connect the two surround sound speakers to the Wireless Receiver Module

2. Check the standby status after plugging into an electrical outlet
   The LINK LED indicator (blue LED) on the Wireless Receiver Module blinks. If the LED does not blink, press the ID SET button on the back of the Wireless Receiver Module with a pen tip for 5~6 seconds until the LINK LED indicator blinks (in Blue).

3. Configure “ID SET” using the Soundbar’s remote control Turn off the Soundbar main. Press the Up button on the remote control for 5 seconds.

USING A WIRED CONNECTION

NOTE

• When the TV sound is not output, press the (Multi Function) button at the top of the Soundbar or the (Source) button on the remote control to select the “TV ARC” mode.
• The recommended cable is an HDMI cable certified by HDMI.org.
• When you use an optical cable and the terminals have covers, be sure to remove the covers.

Using the Q-Symphony Function
When the Soundbar connects to a Samsung TV that supports the Q-Symphony function, you can play the sound simultaneously through the Soundbar and the TV. If you use the Q-Symphony function, the surround sound played on the TV allows you to enjoy a richer, more three-dimensional surround sound effect.
When the Soundbar is connected, “Q-symphony” menu appears on the TV. (The message displayed may differ with the TV model.)
(Settings ( ) → All Settings ( ) → Sound → Sound Output)

Using the SpaceFit Sound
This function analyzes the user’s listening space with the Soundbar’s microphone and provide optimal sound for the space. Sound optimization proceeds automatically.

USING A WIRELESS CONNECTION

Connecting via Bluetooth

Top of the Soundbar

• Search for the Bluetooth device on your TV or mobile device.
  What is the difference between BT READY and BT PAIRING?

• BT READY : In this mode, you can reconnect any Samsung TV or mobile device that was connected before.

• BT PAIRING : In this mode, you can connect a new device to the Soundbar.
  (Press the PAIR button on the Soundbar remote control or press and hold the (Mic On/Off) button on the top of the Soundbar for more than 5 seconds while the Soundbar is in “BT” mode.)
  NOTE
  If asked for a PIN code when connecting a Bluetooth device, enter <0000>.

Connecting via Wi-Fi (Wireless Network)

• To connect a Soundbar to a mobile device via a wireless network (Wi-Fi), the SmartThings app is required.

1. Connect your mobile device (smartphone, tablet, etc.) to the Wi-Fi network the TV is connected to.
2. Install and launch the SmartThings app on your mobile device (smartphone, tablet, etc.).
3. Follow the instructions in the app screen on the mobile device to connect the Soundbar to your Wi-Fi network.

TROUBLESHOOTING

Before seeking assistance, check the following.

Soundbar does not turn on.
Check whether the power cord of the Soundbar is correctly inserted into the outlet.

When the subwoofer or surround sound speakers are not automatically connected

1. Turn off the Soundbar main unit.
2.  Press and hold ID SET on the rear of the subwoofer and surround speakers for at least 5 seconds.
   The surround speakers may not be provided, depending on the model.
   **Subwoofer

**

3. Press the Up button on the remote control for 5 seconds.

4. Check if the LINK LED is solid blue (connection complete).
   The LINK LED indicator stops blinking and glows a solid blue when a connection is established between the Soundbar and the Subwoofer, surround speakers.

• Soundbar works erratically.

  • After removing the power cord, insert it again.
  • Try again after initializing the product.
  • If there is no signal, the Soundbar automatically turns off after a certain period of time. Turn on the power.

• Remote control does not work

  • Point the remote directly at the soundbar.
  • Replace the batteries with new ones.

• The Soundbar indicator turns solid red.
  The microphone is turned off.
  Turn on the microphone.

• Sound is not output from the soundbar.

  • The volume of the Soundbar is too low or muted.
    Adjust the volume.

  • When any external device (STB, Bluetooth device, mobile device, etc.) is connected, adjust the volume of the external device.

  • For sound output of the TV, select Soundbar. (Samsung TV: Home ( ) → Menu → Settings ( ) → All Settings ( ) → Sound → Sound Output → Select Soundbar)
    • Remove the cable from the Soundbar and then reconnect it.

• Sound is not output from the subwoofer or the surround speakers.
  Check whether the LED on the rear of the Subwoofer and Surround Speakers lights in blue. Reconnect it when the blue LED blinks or the red LED lights.

• If the TV is not connected via HDMI TO TV (eARC/ARC)

  • Check whether the HDMI cable is correctly connected to the ARC terminal.

  • Connection may not be possible due to the connected external device (set-top box, game console, etc.).
    Directly connect the Soundbar.

  • HDMI-CEC may not be activated on the TV. Turn on the CEC on the TV menu. (Samsung TV: Home ( ) → Menu → Settings ( ) → All Settings ( ) → Connection → External Device Manager → Anynet+ (HDMI-CEC) ON)

• Soundbar will not connect via Bluetooth.

  • When connecting a new device, switch to “BT PAIRING” for connection. (Press the PAIR button on the remote control or press the (Mic On/Off) button on the body for at least 5 seconds.)
  • Reconnect it after removing the Bluetooth speaker list on the device to connect. (Samsung TV: Home ( ) → Menu → Settings ( ) → All Settings ( ) → Sound → Sound Output → Bluetooth Speaker List)

• Sound drops out when connected via Bluetooth.

  • Some devices can cause radio interference if they are located too close to the Soundbar. e. g. microwaves, wireless routers, etc.
  • If your device that is connected via Bluetooth moves too far away from the soundbar, it may cause the sound to drop out. Move the device closer to the soundbar.
  • If a part of your body is in contact with the Bluetooth transceiver or the product is installed on metal furniture, the sound may drop out. Check the installation environment and conditions for use.

• Soundbar will not connect to Wi-Fi.

  • Make sure the wireless router is turned on and then reconnect the wireless router after rebooting.
  • The soundbar will not connect if the wireless signal is too weak. Try moving the router closer to the soundbar, or eliminating any obstacles that are between the soundbar and the router, if possible.

• The soundbar does not turn on automatically with the TV.
  When you turn off the Soundbar while watching TV, power synchronization with the TV is disabled. First turn off the TV.

IMPORTANT NOTES ABOUT SERVICE

Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance.

SPECIFICATIONS AND GUIDE

LIMITED WARRANTY TO ORIGINAL PURCHASER

Samsung Electronics Canada Inc
2050 Derry Rd West Mississauga, On. L5N 0B9
Tel: 1-800-SAMSUNG (726-7864)
Fax: (905) 542- 1199
Website: www.samsung.com/ca

References

• HDMI Licensing Administrator, Inc.
• Samsung Canada | Mobile | TV | Home Appliances
• Samsung Canada | Mobile | TV | Home Appliances
• Samsung Canada | Mobilité | Téléviseurs | Électroménagers
• Aide et assistance : produits | Samsung Canada
• Product Help & Support | Samsung CA
• Support Home | Official Samsung Support US
• Support Home | Official Samsung Support US

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>