VITALPEAK VP-MSG30 Gentle massager User Manual

: June 3, 2024
: vitalpeak

Table of Contents

INSTRUCTIONS FOR USE
Charging
Using the device:
- Power button
- Vibrations button:
Automatic shutoff
Specifications:
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

INSTRUCTIONS FOR USE

VITALPEAK MSG 30

Gentle massage device

Thank you for purchasing the VITALPEAK product

Safety when working with the device and use. Read carefully the enclosed safety instructions.

For proper handling of the product, read the latest version of the manual, which can be downloaded at: www.vitalpeak.eu
The device is intended for use in a domestic or private environment only, not for commercial or medical purposes
You can indulge in a pleasant massage with this massage device without outside help or use the device during/after exercise or other physical exertion.
The manufacturer is not liable for damage caused by improper or incorrect use.

Charging

Charge fully before first use
Use a USB adapter with a specification of DC 5V/1 A and higher to charge
It is not possible to charge the device during operation. The device switches off automatically
To charge, connect the supplied USB cable to the adapter and connect it to the charging stand. Then place in it the massage device. The charging starts automatically.
Charging is indicated by red LED on the device
Completion of charging is indicated by a green LED on the device
If the green LED flashes intermittently during use, low battery is indicated. Turn off the device and start charging.

Using the device:

Power button

Io turn on, press and hold the power button for about 3 seconds. The LED indicator will turn red and the 4 massage heads will start moving.
The device basically works in a more powerful mode. If you want the heads to move more slowly, briefly press the power button once. To switch to faster mode from slower mode, press the power button again briefly.
To switch off, press and hold the power button again for about 3 seconds.

Vibrations button:

When the device is turned on, you can also activate vibrations
Press the vibration button to turn on stronger vibrations (red LED backlights button)
Press the vibrations button again for weaker vibrations (the red LED backlit button starts flashing)
Press again the vibrations button to turn it off. The vibrations end and the button is not backlit.

Automatic shutoff

A massage should not last more than ten minutes. The device automatically shuts off after 10 minutes. Wait at least 10 minutes before next massage. Too long a massage can lead to stretching and excessive stimulation of muscles and nerves.