Sentek 2ARQBPROBEWIFI PROBEWIFI IoT Probe User Guide

Sentek 2ARQBPROBEWIFI PROBEWIFI IoT Probe

Product Information

The Sentek IoT Probe is a cutting-edge device designed to provide seamless connectivity and data transmission for IoT applications. It allows users to monitor and manage various parameters remotely using the Sentek Connect App on an Android mobile device.

Specifications

• Connectivity: Bluetooth
• Compatibility: Android devices
• Compliance: FCC Part 15
• Minimum Distance: 20cm between the device and the body

Product Usage Instructions

Minimum Requirements
To use the Sentek IoT Probe, you need an Android mobile device with Bluetooth capabilities and access to the Google Play Store.

Setup Access Point

1. Open Google Play Store and search for “nRF Device Manager.”
2. Install the Device Manager App on your Android mobile device.
3. Open the App and grant Bluetooth permissions.
4. Click on the symbol in the upper right-hand corner and ensure SMP UUID option is unticked.
5. Connect to the Sentek IoT Probe from the list.
6. In the Shell command box, send the following commands to set your access point:
   set wifi/ap_name [name] set wifi/ap_key [key]

Sentek Connect App Usage

1. Complete the Introduction Wizard on the Sentek Connect App.
2. Observe WiFi Power on the Scan screen indicated by the cloud icon.
3. Monitor connection status in the App’s Sim Status Field.

FCC Compliance Statement
This device complies with FCC regulations regarding harmful interference and radiation exposure limits. Please ensure a minimum distance of 20cm between the device and your body for safe operation.

FAQ

Q: How do I reset the Sentek IoT Probe?
A: To reset the probe, press and hold the reset button for 10 seconds until the LED indicators flash.

Sentek IoT Probe Quick Start Guide

INTRODUCTION

• What’s in the box?
  • Sentek IoT Probe
  • Sentek Drill & Drop Bluetooth Probe
• What you Need to Get Started
  • Access Point
  • Android Mobile Device with Bluetooth Capability
  • Google Play Store Account
• Quick Start
  • Open Google Play Store on the Android Mobile device
  • Type Sentek Connect on the search bar
  • Install the Sentek Connect App on the Android Mobile device
  • Follow the steps to set up your phone and the Bluetooth Drill & Drop probe
• Minimum requirements
  • Mobile device must be running Android version 4.3 or later
  • Requires Bluetooth 4 capability

SETUP ACCESS POINT

1. Open Google Play Store and type nRF Device Manager in  the search bar.
   Install the Device Manager App on your Android Mobile Device. 

2. Open the App and Grant Bluetooth Permissions. Select Allow when the App prompts to connect to nearby devices

3. Click on the symbol located on the right hand side upper corner of the screen and ensure the only devices advertising SMP UUID option is unticked.

4. Connect to the Sentek IoT Probe from the list by clicking on the name.

5. Click on the Shell command option located at the bottom right hand side of the screen.
   In the Shell command box, send the following commands to set your access point:

6. set set wifi/ap_name “name”

7. set set wifi/ap_key “key”
   Note: In place of “name” – type your access point name  In place of “key” – type your access point key. 

SETUP – Sentek Connect App

1. After successful installation of the Sentek Connect App, complete the Introduction Wizard by following the instructions provided on the App.
2. On the Scan screen of the App, WiFi Power can be observed by the cloud icon on the App.
3. Connect to the probe can be seen in the App in the Sim Status Field. When the Connection is made, the status will change from Not Registered to Registered.

FCC Compliance Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Information to User

• This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications.
• Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.
• Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

RF Exposure compliance statement
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>