SUNCO LIGHTING T8 LED Tube Quick Bypass Ballast Instruction Manual
- June 1, 2024
- Sunco Lighting
Table of Contents
SUNCO LIGHTING T8 LED Tube Quick Bypass Ballast Instruction Manual
T8 LED TUBE QUICK BYPASS-BALLAST
40W LED Replacement for R17d 8FT T8 (T12) Fluorescent Lamps Type B – Double- Ended, Ballast Bypassed
DESCRIPTION
The 8 ft. T8 LED Tube is a 40W line driven (Type B, double ended, ballast bypassed) linear T-LED replacement for an 8FT recessed double contact (R17d) T8 or T12 fluorescent lamp. Its built-in universal driver allows lamp operation at 100V ~ 277V.
R17d end cap makes this a double-ended lamp, allowing installation into both Shunted and Non-Shunted sockets in the case of the Double Recessed Contact. R17d lamps are ETL Classified for safe handling and can reduce installation time by half.
This lamp emits beautiful LED light over 180° of its surface. It has a Color Rendering Index (CRI) of >80 and delivers up to 5,000 lumens of usable light. The T8 LED 8FT features an aluminum tube for improved optics and is available in 5000K color temperature.
The T8 8FT LED lamp may also replace a T12 fluorescent lamp. This lamp is rated at 50,000 hours and is backed by a five-year warranty. It contains no mercury, allowing for non-hazardous waste disposal. This is a Type B (ballast bypassed) lamp and does not support fluorescent ballasts or LED drivers. For a fixture with Double Recessed Contact sockets, the sockets can be either Shunted or Non-Shunted. All sockets are wired into AC line voltage.
FEATURES
- Replacement for T8 or T12 Lamps up to 75W with a 40W LED
- Quick Bypass (Type B, double-ended, ballast bypassed) Installation – supports line
- Input Voltage 100V-277V AC
- Universal Tombstone Technology (UTT) compatible with both Shunted and Non-Shunted Double
- Recessed Contact sockets
- Delivers up to 5,000 lumens at >=80 CRI
- 5000K CCT
- 50,000 hours life to L70 / 5-Year Warranty / P.C Shatter Guard
8FT LED Tube Light| Pin| Ballast| Length| Lumen|
CRI| Power Factor| Color Temperature
R17D| Bypassed Support (100V-277V| 96 inchtube| 5,000lm| >= 80| >0.95| 5000K
T8 LED TUBE QUICK BYPASS-BALLAST
PRODUCT SPECIFICATION
Illumination
Color Temperature : 5000K
Delivered Lumens : Up to 5,000lm
CRI : ≥80
Lumen Maintenance : 50,000+hours life
Electrical System
Power Factor : >0.9
CRI: Ra80
Input Voltage : 100V~277V 50/60Hz AC
Lifespan: 50,000+ hours life
Total Power : 40W
Lamp Wattage Replaced : Up to 75W
Dimming: No
Physical Double Recessed Contact
Weight: 0.55kg/pcs
Housing and Finish : Aluminum with PC Cover (Frosted)
Beam Angle : 180°
Environment
Ambient Operating Temp : -4°F to 113°F
Ambient Operating Humidity : Dry and Damp Certified
Installation
Line Voltage Ballast : R17D socket (Shunted or Non-Shunted)
Installation: Bypass Ballast
Certifications & Qualifications
ETL (US and Canada): Classified ETL Intertek
FCC: Complies with Parts 15A/B
RoHS Compliant : Contains no led or mercury
Listed : No category
Warranty : 5 years
Lamp installation in the following conditions and applications voids the product warranty:
- Line voltage above 277VAC
- LED Drivers or with a ballast
- Gasketed, fully enclosed fixtures
- Installation in wet environments
- Installation in broken, cracked, dirty or rusted tombstones
- Improper wiring to the tombstones/lamp
- Total Power equals lamp power because the ballast has been bypassed or removed.
T8 LED TUBE QUICK BYPASS-BALLAST
Double-Ended Electrical Connection & Single-Ended Electrical Connection
-
Double-Ended Wiring
-
Single-Ended Wiring
Socket Type
Double Recessed Contact (R17d)
Shunted or Non-Shunted (Double-Ended Installation)
CAUTION
Turn power off when installing the lamp.
CAUTION – IF THE LAMP OR LUMINARY EXHIBITS UNDESIRABLE OPERATION
(BUZZING, FLICKERING, ETC.), IMMEDIATELY TURN OFF POWER, REMOVE LAMP FROM
LUMINARY AND CONTACT MANUFACTURER