VANCOMPASS 4068 Aluminum Intercooler Bumper Skidplate Installation Guide
- June 1, 2024
- VANCOMPASS
Table of Contents
VANCOMPASS 4068 Aluminum Intercooler Bumper Skidplate
Product Information
Specifications:
- Product Name: Ford Transit Aluminum Skidplate
- Compatibility: Compatible with Ford Transit models
- Includes: Skidplate, hardware for installation
Product Usage Instructions
Parts List:
- SKIDPLATE
- FORD TRANSIT, ALUMINUM SKIDPLATE
- Optional: FORD TRANSIT, ALUMINUM SKIDPLATE (COMPATIBLE WITH 4105 WINCH MOUNT RECEIVER)
Tools Needed:
- 4-1/2 angle grinder with cut-off wheel
- Basic wrench and socket set: Metric sizes – 10mm
Approximate Installation Time:
Installation time may vary but plan for a moderate amount of time to complete the process.
Installation Steps:
- Remove the lower air deflector from the vehicle.
- Locate the designated hole on the bumper support bars for attachment.
- For specific models, make a small cut on the lower radiator crossmember for fitment.
- Install the skid plate using a floor jack, ensuring proper orientation.
- Torque all bolts to 35 ft-lbs (47 N.m).
Release of Liability and Safety Warning:
Van Compass LLC recommends certified mechanic installation. Ensure all instructions are followed to prevent safety hazards.
Frequently Asked Questions (FAQ)
-
Q: Can I install the skid plate without professional help?
A: While it is recommended to have a certified mechanic install the product, individuals can install it if they carefully follow the provided instructions. -
Q: Is the skid plate compatible with all Ford Transit models?
A: The skid plate is compatible with specific Ford Transit models. Refer to the product description for details.
General Notes
- For the most up-to-date and current instructions, please visit our website at www.vancompass.com
- Please read all instructions thoroughly before starting to install Van Compass products.
- This is a bolt-on skid plate that can be installed with simple hand tools and a drill.
- Two ½” (13mm) holes need to be drilled for installation.
- Removal of the lower air deflector is required for installation.
- This skid plate features an easy-to-remove oil filter access plate so oil changes can be performed without removing the entire skid plate.
- Note, to install 4068 on T-350 HD models with the higher GVWR rating, a small cut must be made on the lower radiator crossmember for fitment. See step 4 in these instructions for details. 4110 is a bolt-on with no modifications required
Parts List
4068 / 4110 – 2013-PRESENT, FORD TRANSIT, ALUMINUM INTERCOOLER / BUMPER SKIDPLATE
-
(1) 406801 FORD TRANSIT, ALUMINUM SKIDPLATE
OR -
(1) 411001 FORD TRANSIT, ALUMINUM SKID PLATE (COMPATIBLE WITH 4105 WINCH MOUNT RECEIVER
-
(4) HC8-08-32 HEX HEAD BOLT, ½-13 X 3.5” LONG
-
(4) NNC-08 NYLOCK NUT, ½-13
-
(8) WF8-08 GR8 ½” FLAT WASHER
-
(3) BHCS02-03-SS BUTTON HEAD CAP SCREWS, ¼-20 X 3/4” LONG, SS (ASSEMBLED)
-
(3) WF-BZ-02 ¼” FLAT WASHER, SS BLACK ZINC (ASSEMBLED)
Tools Needed
- Drill with ½” (13mm) metal cutting drill bit
- Plastic cutting tool. Examples;
- 4-1/2” angle grinder with cut-off wheel
- Simple hand tools:
- Basic wrench and socket set:
- Metric sizes: 10mm
- SAE Sizes: ¾”
- 5/32” Allen wrench (For Oil Filter Access Plate Removal)
- Torque wrench
- Floor jack
- 4-1/2” angle grinder with metal cutting wheel (For T-350 HD install only)
Approximate Installation Time
- 1-2 hours
Installation
-
On the underside of the bumper, locate the 6 bolts securing the lower air deflector to the vehicle. There are 4 bolts towards the front which connect the bumper cover to the air deflector, and 2 additional bolts securing the air deflector to the chassis itself. See image below for reference. Remove these 6 bolts using a 10mm socket/wrench.
Note : 2020+ models have 4 additional bolts connecting the lower air deflector to the bumper cover. See the second image below denoting all bolt locations
-
Remove the lower air deflector from the vehicle.
-
With the lower air deflector removed from the vehicle, locate the 2nd hole from the front in the bumper support bars. This hole will need to be through-drilled for the skid plate to attach. See the images below for reference on which holes need to be through-drilled.
-
Use a ½” or 13mm diameter drill bit to drill through the top side of the bumper support bars.
-
For T-350 HD models featuring the higher GVWR option, a small cut must be made on the lower radiator crossmember for fitment. If installing on a T-150, 250 or non-HD 350 version, proceed to step 5.
-
See images below for cut reference. Perform cut on both the driver and passenger sides of the vehicle.
-
Deburr any sharp edges after cutting and touch up any exposed areas of metal with quality spray paint to prevent corrosion.
-
Install the skid plate using a floor jack. Use a towel or other non-marring surface on the floor jack saddle as to not damage the powder coat during installation.
-
Orient the skid plate so the front bent up lip is positioned towards the front of the vehicle. See the image below for reference.
-
Fit the skid plate to the bumper support bars as shown using the ½-13 hardware included in the kit. Use a washer under both the bolt head and the nut. Start and snug all 4 bolts using a ¾” socket/wrench.
-
Once all bolts have been started, torque to 35 ft-lbs (47 N.m).
RELEASE OF LIABILITY
- I, the customer, do hereby release and forever discharge Van Compass LLC, their agents, employees, successors and assigns, and their respective heirs, personal representatives, affiliates, successors and assigns, and any persons, firms or corporations liable or who might be claimed to be liable, whether or not herein named, from any claims, demands, damages, actions, causes of action or suits of any kind or nature whatsoever, whether known or unknown, fixed or contingent, which I now have or may hereafter have or claim to have, as a result of or in any way relating to the following: Parts sold & installed by Van Compass LLC or parts sold & installed by end-user; any parts sold online, any parts sold online or installed by a re-seller, any parts installed by an installation shop.
- It is understood and agreed that this payment is made and received in complete settlement and satisfaction of the aforesaid actions, causes of action, claims and demands; that this Release contains the entire agreement between the parties; and that the terms of this Agreement are contractual and not merely a recital. Furthermore, this Release shall be binding upon the undersigned, and his respective heirs, executors, administrators, personal representatives, successors and assigns. This Release shall be subject to and governed by the laws of the State of Idaho.
PRODUCT SAFETY WARNING:
- Van Compass LLC strongly recommends the installation of products be done by a certified mechanic. If this does not occur, be certain the person(s) installing the product read, understands and follow all instructions and warnings about the application before installation. Do not add, alter, or fabricate any factory or aftermarket parts to increase vehicle height over the intended height of the Van Compass LLC product purchased. Mixing component brands is not recommended.
- Installation of suspension lift kits or any other lifting kits or devices will raise the centre of gravity. For this reason, Van Compass LLC urges that extreme caution be used when encountering driving conditions that may cause vehicle imbalance. Furthermore, the driver’s field of vision and judgment will not be as good due to the height of the vehicle. Due to the installation of larger tyres, the speedometer will read slower than the actual speed being travelled and more distance will be required to stop the vehicle. It is the owner’s responsibility to caution and warn any potential driver of the vehicle about these driving and handling conditions. Van Compass LLC will not be held liable or responsible for damages or personal injuries resulting from the use of lifting devices and or related products. The tyres and rims should be changed to sufficiently increase the vehicle’s total overall width and stability to help accommodate lifting devices.
- Van Compass LLC aftermarket suspension products and accessories modify a vehicle for uses which exceed conditions anticipated by the vehicle manufacturer. The uses include the high-performance demands required during off-road. These conditions vary in the degree of extremity and cannot be controlled by the vehicle or product manufacturer. If the components within the suspension system or accessories become worn due to frequent and/or extreme use, the safety and reliability of the vehicle is at risk. The maintenance of aftermarket equipment to ensure the vehicle occupants’ safety is entirely your responsibility. Do not purchase Van Compass LLC products unless you are willing to accept this responsibility. Do not install any Van Compass LLC suspension products or accessories unless you feel competent at installing the product without causing present or future injury to yourself or other vehicle occupants; seek an authorized installation center.
- Most states have some type of law limiting vehicle height. The amount of lift allowed, and how the lift can be achieved, varies greatly. Several states offer exemptions for farm and commercial registered vehicles. It is the vehicle owner’s responsibility to check state and local laws to ensure that their vehicle will comply. Van Compass LLC reserves the right to make changes in design, materials and specifications as deemed necessary without prior notice and without assuming obligation to modify any product previously manufactured. Obligations or liabilities will not be assumed concerning similar products previously advertised.
- This Release of Liability and Product Safety Warning has been read and fully understood by the undersigned and has been explained to me.