SALAMANDER DESIGNS SU20 Synergy Core Module Installation Guide
- June 1, 2024
- SALAMANDER DESIGNS
Table of Contents
SALAMANDER DESIGNS SU20 Synergy Core Module
Product Information
Specifications
- Product Name: Synergy Base Unit
- Variants: Single (SU20/SU30/SU40), Twin (SN20/SN30/SN40), Triple (SL20/SL30/SL40), Quad (SQ20/SQ30)
- Materials: Aluminum, Rubber, Steel
- Includes: Connector Bolts, Top Shelf, Bottom Shelf, Rear Panel, Shelf Pegs, Leveler Foot, Heavy Shelf Bracket, Hardware
FAQ
- Q: What should I do if I want to install accessories like doors or drawers?
- A: If you are installing accessories such as doors or drawers to the base unit, make sure to read all instructions for the accessory and install them in conjunction with these instructions provided.
- Q: How do I level the shelves properly?
- A: Use the bubble level provided to precisely adjust the shelves. Be sure to level both side to side as well as front to back. Use the hex key to tighten each peg for stability.
- Q: What is included in the product package?
- A: The package includes connector bolts, top shelf, bottom shelf, rear panel, shelf pegs, leveler foot, heavy shelf bracket, and necessary hardware for assembly.
Models
SYNERGY SINGLE (SU20/SU30/SU40)
SYNERGY TWIN (SN20/SN30/SN40)
SYNERGY TRIPLE (SL20/SL30/SL40)
SYNERGY QUAD (SQ20/SQ30)
SYNERGY BASE UNIT
SYNERGY BASE UNIT – SU20 / SU30 / SU40
_ WARNING: _If you are installing accessories such as doors or drawers to the base unit, read all instructions for the accessory and install in conjunction with these instructions.
Parts
- 4 – Aluminum Post
- 1 – Top Shelf
- 1 – Bottom Shelf
- 1- Rear Panel
- Adjustable Shelf (SU20 -1) • (SU30 – 3) • (SU40 – 4)
- Heavy Duty Shelf Bracket (SU30 – 2) • (SU40 – 2)
- 1 – Spacer Tool
Limited Warranty
For five full years Salamander Designs Ltd will repair or replace, at our option, any product defective in materials or craftsmanship. Salamander Designs Ltd. will not be responsible for any damage to or destruction of other equipment consequential to our equipment failure. Defective product must be given Return Authorization and is to be returned to the factory prepaid, in the original carton and packing material. Any damage incurred in a shipment not in original packaging shall be the responsibility of the owner. Warranty repairs will be returned prepaid, via UPS within the continental U.S.A. only.
Installation Instructions
Connect Posts to Bottom Shelf
WARNING: Tighten by screwing the leveller foot NOT the post.
- Square Post
- Square the post to the bottom shelf.
- Connect Post
- Screw foot with metal washer through bottom shelf and onto the end of the post. Hand tighten fully then use wrench on hex nut to back tighten nut onto underside of shelf.
Add Shelf Pegs
WARNING: If you are installing an optional door or drawer refer to specific instructions before proceeding.
- Insert all shelf pegs and heavy shelf brackets (SU30 / SU40 only) down each post.
- Gently tighten pegs and brackets with the hex key to desired position.
Adjust Shelf Pegs & Add Shelves
- Adjusting Shelves
- Insert peg down the post channel and position the peg through the Spacer and tighten. You may also consider using books or CD’s for shelf spacing.
- Placing Shelves
- Place shelves from the bottom up. Angle the shelf in between the front post and set on top of shelf pegs and heavy duty brackets.
- Fine Tuning
- Use the bubble level to precisely adjust the shelves. Be sure to level both side to side as well as front to back. Use the hex key to tighten each peg.
Attach Rear Panel
-
Insert Hardware
-
Combine the 1” threaded studs with the flat nuts. Slide hardware into rear channel
STOP: Side Panels -
Before enclosing the unit with the top shelf install side panels (if applicable). See Side Panel Instructions
-
-
Secure Rear Panel
- Secure thumb nuts to finish panel installation.
-
Install Top
- Insert the four connector bolts and tighten shelf down.
SYNERGY TWIN UNIT
SYNERGY TWIN UNIT – SN20 / SN30 / SN40
WARNING: If you are installing accessories such as doors or drawers to the base unit, read all instructions! for the accessory and install in conjunction with these instructions.
Parts
- 6- Aluminum Posts
- 1- Top Shelf
- 1- Bottom Shelf
- 2- Rear Panels
- Adjustable Shelf (SN20 -2) • (SN30 – 4) • (SN40 – 8)
- Heavy Duty Shelf Bracket (SN40 – 4)
- 1- Spacer Tool
Limited Warranty
For five full years Salamander Designs Ltd will repair or replace, at our option, any product defective in materials or craftsmanship. Salamander Designs Ltd. will not be responsible for any damage to or destruction of other equipment consequential to our equipment failure. Defective product must be given Return Authorization and is to be returned to the factory prepaid, in the original carton and packing material. Any damage incurred in a shipment not in original packaging shall be the responsibility of the owner. Warranty repairs will be returned prepaid, via UPS within the continental U.S.A. only.
Installation Instructions
Connect Posts to Bottom Shelf
_ WARNING: _Tighten by screwing the leveler foot NOT the post.
- Square Post
- Square the post to the bottom shelf.
- Connect Post
- Screw foot with metal washer through bottom shelf and onto the end of an extruded post. Hand tighten fully then use wrench on hex nut to tighten nut onto underside of shelf.
Add Shelf Pegs
_ WARNING: _If you are installing an optional door or drawer refer to specific instructions before proceeding.
- Insert all shelf pegs down each post.
- Gently tighten pegs with the hex key to desired position.
Adjust Shelf Pegs & Add Shelves
- Adjusting Shelves
- Insert peg down the post channel and position the peg through the Spacer and tighten. You may also consider using books or CD’s for shelf spacing.
- Placing Shelf
- Place shelves from the bottom up.
- Angle the shelf in between the front post and set on top of shelf pegs and heavy duty brackets.
- Fine Tuning
- Use the bubble level to precisely adjust the shelves. Be sure to level both side to side as well as front to back. Use the hex key to tighten each peg.
Attach Rear Panel & Top Shelf
-
Insert & Align Studs
-
Combine the 1” threaded studs with the flat nuts. Slide hardware into rear posts.
-
Use the Spacer Tool to align top and bottom studs.
Side Panels -
Before enclosing the unit with the top shelf install side panels (if applicable). See Side Panel Instructions
-
-
Install Top
- Insert the top 8 connector bolts and tighten down top shelf.
TIP: To ease the installation of rear panels first remove any drawers and/or doors and gently place the unit face down on the floor to improve aligning of panels.
SYNERGY TRIPLE UNIT
SYNERGY TRIPLE UNIT – SL20 / SL30 / SL40
_ WARNING: _If you are installing accessories such as doors or drawers to the base unit, read all instructions for the accessory and install in conjunction with these instructions.
Parts
- 8- Aluminum Posts
- 1- Top Shelf
- 1- Bottom Shelf
- 3- Rear Panels
- Adjustable Shelf (SL20 -3) • (SL30 – 6)
- 1- Spacer Tool
Limited Warranty
For five full years Salamander Designs Ltd. will repair or replace, at our option, any product defective in materials or craftsmanship. Salamander Designs Ltd. will not be responsible for any damage to or destruction of other equipment consequential to our equipment failure. Defective product must be given Return Authorization and is to be returned to the factory prepaid, in the original carton and packing material. Any damage incurred in a shipment not in original packaging shall be the responsibility of the owner. Warranty repairs will be returned prepaid, via UPS within the continental U.S.A. only.
Connect Posts to Bottom Shelf
WARNING: Tighten by screwing the leveler foot NOT the post.
- Square Post
- Square the post to the bottom shelf.
- Connect Post
- Screw foot with metal washer through bottom shelf and onto the end of an extruded post. Hand tighten fully then use wrench on hex nut to tighten nut onto underside of shelf.
Add Shelf Pegs
_ WARNING: _If you are installing an optional door or drawer refer to specific instructions before proceeding.
- Insert all shelf pegs down each post.
- Gently tighten pegs with the hex key to desired position.
Adjust Shelf Pegs & Add Shelves
- Adjusting Shelves
- Insert peg down the post channel and position the peg through the Spacer and tighten. You may also consider using books or CD’s for shelf spacing.
- Placing Shelf
- Place shelves from the bottom up.
- Angle the shelf in between the front post and set on top of shelf pegs and heavy duty brackets.
- Fine Tuning
- Use the bubble level to precisely adjust the shelves. Be sure to level both side to side as well as front to back. Use the hex key to tighten each peg.
Attach Rear Panel & Top Shelf
-
Insert & Align Studs
-
Combine the 1” threaded studs with the flat nuts. Slide hardware into rear posts.
-
Use the Spacer Tool to align top and bottom studs.
Side Panels -
Before enclosing the unit with the top shelf install side panels (if applicable).
-
See Side Panel Instructions
-
-
Install Top
- Insert the top 8 connector bolts and tighten down top shelf.
-
Secure Rear Panel
- Place panels and secure thumb nuts to finish rear panel installation.
TIP
- To ease installation of rear panels first remove any drawers and/or doors and gently place the unit face down on the floor to improve aligning of panel.
SYNERGY QUAD UNIT
SYNERGY QUAD UNIT – SQ20 / SQ30
_ WARNING: _If you are installing accessories such as doors or drawers to the base unit, read all instructions for the accessory and install in conjunction with these instructions.
Parts
- 10- Aluminum Posts
- 1 – Top Shelf
- 1 – Bottom Shelf
- 4 – Rear Panels
- Adjustable Shelf (SQ20 – 4) • (SQ30 – 8)
- 1 – Spacer Tool
Limited Warranty
For five full years Salamander Designs Ltd. will repair or replace, at our option, any product defective in materials or craftsmanship. Salamander Designs Ltd. will not be responsible for any damage to or destruction of other equipment consequential to our equipment failure. Defective product must be given Return Authorization and is to be returned to the factory prepaid, in the original carton and packing material. Any damage incurred in a shipment not in original packaging shall be the responsibility of the owner. Warranty repairs will be returned prepaid, via UPS within the continental U.S.A. only.
Installation Instructions
Connect Posts to Bottom Shelf
_ WARNING: _Tighten by screwing the leveler foot NOT the post.
- Square Post
- Square the post to the bottom shelf.
- Connect Post
- Screw foot with metal washer through bottom shelf and onto the end of an extruded post. Hand tighten fully then use wrench on hex nut to tighten nut onto underside of shelf.
Add Shelves
WARNING: If you are installing an optional door or drawer refer to specific instructions before proceeding.
- Insert shelf pegs down each post as shown.
- Use the Spacer Tool to adjust spacing between shelves. Position the peg through the Spacer and tighten. Gently tighten pegs with the hex key to desired position.
Adjust Shelf Pegs & Add Shelves
- Adjusting Shelves
- Insert peg down the post channel and position the peg through the Spacer and tighten. You may also consider using books or CD’s for shelf spacing.
- Placing Shelf
- Place shelves from the bottom up. Angle the shelf in between the front post and set on top of shelf pegs and heavy duty brackets.
- Fine Tuning
- Use the bubble level to precisely adjust the shelves. Be sure to level both side to side as well as front to back. Use the hex key to tighten each peg.
Attach Rear Panel & Top Shelf
-
Insert & Align Studs
-
Combine the 1” threaded studs with the flat nuts. Slide hardware into rear posts.
-
Use the Spacer Tool to align top and bottom studs.
Side Panels -
Before enclosing the unit with the top shelf install side panels (if applicable). See Side Panel Instructions
-
-
Install Top
- Insert the top 8 connector bolts and tighten down top shelf.
-
Secure Rear Panel
- Place panels and secure thumb nuts to finish rear panel installation.
TIP: To ease installation of rear panels first remove any drawers and/or doors and gently place the unit face down on the floor to improve aligning of panels.