TESPRO CORP TP-BT Optical Probe Optical Head User Manual

June 1, 2024
TESPRO CORP

TESPRO CORP TP-BT Optical Probe Optical Head

TESPRO-CORP-TP-BT-Optical-Probe-Optical-Head-fig-
\(2\)

Product Information

Specifications:

  • Compliance: Part 15 of FCC Rules
  • RF Exposure: Meets general RF exposure requirements
  • Usage: Portable exposure condition without restriction

Product Usage Instructions

FCC Compliance:
This device complies with Part 15 of the FCC Rules. Ensure that the device is operated in a manner that does not cause harmful interference and accepts any interference received.

RF Exposure:
The device has been evaluated to meet general RF exposure requirements. It can be used in portable exposure conditions without restrictions. Maintain a safe distance while using the device to comply with RF exposure guidelines.

Warning:
Avoid making changes or modifications to the device that are not expressly approved by the responsible party for compliance. Unauthorized modifications could void the user’s authority to operate the equipment.

Frequently Asked Questions (FAQ)

  • Q: What should I do if the device causes interference?
    A: If the device causes interference, try repositioning it or moving it away from other electronic devices. Ensure that it is not placed near sources of electromagnetic interference.

  • Q: Can the device be used in all environments?
    A: The device can be used in portable exposure conditions without restrictions, but be mindful of the surroundings to avoid interference with other devices.

Technical Specifications

Standard : IEC 62056-21(IEC 61107) / ANSI C12.18 compliant
Interface: Infrared optical
Connector: USB 2.0
M_ax . Communication Distance : 9 Meters(29_6 feet)
Max . B.R.: Fixed 9600bps / Dynamic 300 ~ 57600bps
Attachment: Strong magnetic, complied with IEC 62056-21(IEC 61107) or

ANSI C12.18
Computer compatibility:| Microsoft Windows, Mac OS X, Linux, Android, Windows CE
Battery :| 800mAh, 20 hours
Voltage:| 3.7 ~ 4.2V
Power Adapter:| AC 85 ~ 220V, DC 5V
Cable:| 2 meters(6.5 feet)
Enviroment:| -15’C ~ 80’C (5’F – 176’F)

Default Bluetooth Pair Code

TESPRO-CORP-TP-BT-Optical-Probe-Optical-
Head-fig- \(3\) TESPRO-CORP-TP-BT-Optical-Probe-
Optical-Head-fig- \(4\)

Battery Indicator

  • Battery Full: Green
  • Deem Green: Battery Low
  • Indicator Off: Battery Out
  • Charging: Red

Battery Usage

  • TP-BT come with advanced power management to protect the battery from overcharging.
  • Always keep the battery fully charged to be ready for work.
  • Exhausted batteries may damage the battery life.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation.
Warning : Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

RF warning statement:
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals