Mircom MS-710APU Advanced Protocol Intelligent Manual Station Instruction Manual
- June 9, 2024
- Mircom
Table of Contents
Mircom MS-710APU Advanced Protocol Intelligent Manual Station
Description
- Mircom’s MS-710APU Advanced Protocol Intelligent Manual Station is made of a high quality, die-cast metal and is available as a dual-action device with key resets and a permanently attached intelligent module. The intelligent manual station has a pair of rotary decimal switches which allows for two digit address setting. Pulling the handle initiates the operation of the intelligent module.
- The manual station is available with CAT-30 keys and mounts on a standard single gang backbox, Mircom model BB-700 interior surface metal backbox, or BB-700WP weather proof backbox.
- Mircom’s Advanced Protocol (AP) devices use a high speed communication protocol that greatly increases the speed of communication between the intelligent devices. Mircom’s Advanced Protocol uses a superior group polling method as well as an interrupt feature that provide for a faster response to an alarm condition. In addition, the Advanced Protocol allows for greater system capacity with support for up to 318 devices per SLC circuit. The AP devices are backwards compatible to operate in CLIP mode for legacy system applications.
Features
- Dual Action
- Key resettable
- Permanently attached Intelligent Addressable Module
- Rotary switches for direct-dial entry of address.Each unit can have address set for 01-159 for Advanced Protocol mode and 01-99 for CLIP mode
- High-gloss red enamel finish
- Plastic breakrod
- Meets ADA 5 lb. maximum manual-force
- Mounts on standard single gang box, Mircom’s BB-700 surface metal backbox or BB-700WP weather proof backbox
Operation
The MS-710APU Dual Action Intelligent Manual Station is operated by pushing the bar labelled “PUSH BAR” and then pulling down the handle marked “PULL HANDLE”. The MS-710APU is reset by opening the station with the key, placing the handle in the normal upright position and re-locking the station.
Specifications
The manual station shall be Mircom’s MS-710APU. Operating instructions shall be in raised English lettering and the unit shall be constructed of high quality die-cast metal and finished in red enamel paint to provide quick identification. Pulling the handle shall initiate immediate operation of the intelligent addressable module. All manual fire alarm stations shall be installed as per the specific requirements outlined in the UL codes, as well as all other applicable national or local codes. Final acceptance is subject to the local authority having jurisdiction.
NOT TO BE USED FOR INSTALLATION PURPOSES.
THIS INFORMATION IS FOR MARKETING PURPOSES ONLY AND NOT INTENDED TO DESCRIBE
THE PRODUCTS TECHNICALLY.
Specifications
| Dimensions | 4.93” H x 3.56” W x 2.9” D |
|---|---|
| Nominal Operating Voltage | 15–32 VDC |
| Maximum Alarm Current @ 24V | 600 μA |
| Average Operating Current @ 24V | 400 μA |
Surface Mount Backboxes
Wiring Diagram
Mounting Diagram
Ordering Information
| Model | Description |
|---|---|
| MS-710APU | Advanced Protocol Intelligent Key Resettable Dual Action Manual |
Station
BB-700| Series 700 Interior Surface Mount Backbox, Red Finish
BB-700WP| Series 700 Weatherproof Surface Mount Backbox, Red Finish
GL-007K| Activation indicator (plastic break bar)
THIS INFORMATION IS FOR MARKETING PURPOSES ONLY AND
NOT INTENDED TO DESCRIBE THE PRODUCTS TECHNICALLY.
For complete and accurate technical information relating to performance,
installation, testing and certification, refer to technical literature. This
document contains intellectual property of Mircom. The information is subject
to change by Mircom without notice. Mircom does not represent or warrant
correctness or completeness. All rights reserved. All other trademarks and
registered trademarks are properties of their respective owners.
Canada
25 Interchange Way Vaughan, ON L4K 5W3 Telephone:
905-660-4655 | Fax:
905-660-4113
U.S.A.
4575 Witmer Industrial Estates Niagara Falls, NY 14305 Toll Free:
888-660-4655 | Fax Toll Free:
888-660-4113
www.mircom.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>