93039-IM Indoor Fountain Globo Instruction Manual
- June 1, 2024
- GLOBO
Table of Contents
93039-IM Indoor Fountain Globo
Product Assembly
Part A
- Illustration of a hand switching a power strip or power board from ON to OFF.
Part B
A line drawing depicting the assembly of a decorative fountain with a Buddha figure.
- Water flowing from a lotus leaf into a bowl.
- A transformer connected to a small pump (labeled with ‘400ML’ indicating the water capacity).
- Power cord.
- A close-up of the pump and transformer connection.
Part C
- Depicts a hand switching a power strip or power board from OFF to ON.
Specifications
- Product Code: 93039
- Official website:www.globo-lighting.com
| Component | Specification |
|---|---|
| Bulb Type | 1x Max 0.125W 12V LED |
| Power Supply | AC ADAPTOR: 230-240V~ 50Hz |
| Intended Use | INDOOR USE |
FAQ
- How do I assemble the decorative fountain?
- Follow the line drawing in Part B for the assembly of the fountain. Ensure the pump is submerged in water as shown in the inset diagram.
- What type of bulb does the fountain use?
- The fountain uses a 1x Max 0.125W 12V LED bulb.
- What is the voltage requirement for the power supply?
- The fountain requires an AC adaptor with a voltage of 230-240V~ 50Hz.
- Can this fountain be used outdoors?
- No, this fountain is intended for INDOOR USE only.
Power
Power Off
Power On
Installation Instructions
More Information
Specs
- 1x Max 0.125W 12V LED
- AC ADAPTOR:230-240V~ 50Hz
Globo Handels GmbH
- Gewerbestrasse 3
- A-9184 Sankt Peter AUSTRIA
- www.globo-lighting.com
Read User Manual Online (PDF format)
Loading......