Global Sources BC86 Bluetooth Car Charger Instruction Manual

Global Sources BC86 Bluetooth Car Charger

Product Features

1. Bluetooth、FM audio transmission
2. Support QC 3.0 QC2.0、PD、Huawei FCP、Samsung AFC、BC1.2、 Apple 2.4A and other charging protocols
3. Support WMA，MP3,WAV, APE, FLAC music format
4. Support bluetooth hands-free, Voice broadcast, music, navigation.
5. Support output over voltage protection, short circuit protection, over current protection, over temperature protection
6. Low voltage flashing alarm
7. Automatic connect
8. Support U-Disk and TF card play music
9. BASS.TREBLE can be adjusted
10. Dazzling music spectrum

Product specifications

1. Bluetooth version: 5.3
2. FM frequency: 87.5 Mhz-108.0 Mhz
3. Bluetooth effective distance: 10m
4. QC3.0 output: 5V/3A、9V/2A、12V/1.5A
5. PD output: 5V/3A、9V/3A、12V/2.5A
6. Music port output: 5V/1A
7. Input voltage: 12V-24V
8. U Disk/TF card capacity: 32G MAX

Product Diagram

Operation instructions

1. Insert the product into the cigarette lighter of the car after vehicle start.
2. The product turns on automatically .
3. Turn on your car FM radio, and choose the blank FM channel.
4. Adjust the product frequency same as your car radio.
5. Turn on the bluetooth of your phone, search for the bluetooth device “BC86” and connect
6. After the connection is successful, you can play music, navigate or make/answer calls.

FM frequency adjustment

Click or long press” ”button to adjust FM frequency.

Adjust the volume:
Rotate” ”button, clockwise volume +, counterclockwise volume-.
Music control：

1. Pause/play–click”  ”button
2. Last song–click” ”button
3. Next song–click”  ”button

BASS/TREBLE sound effect adjustment:
Click”BASS ”button，to turn on/off bass，click”TER ” button to turn on/off treble, power-off memory current sound effect.

Dial/answer call

1. Answer a call: click” ”button
2. Hand up a call: click”  ”button
3. Reject a call: long press” ”button

Play source switch：
U-Disk/TF Card/AUX IN, post insertion priority play When the machine is connected to bluetooth/U disk/T card/AUX IN, double click” ”button to switch between these mode

AUX mode：
Plug in the audio cable to enter the AUX MODE

1. Audio output mode
   Enter this mode, need click”  ”button to switch between TF card/U disk/bluetooth play to play music

2. Audio input mode
   Enter this mode, play music directly after connect device （The button in this mode are not controlled. If you switch to TF card/U disk/bluetooth play at the same time, there will be sound mixing.）

Voice assistant wake up

After bluetooth connection, long press the ” ”button for 2 seconds to activate SIRI/voice assistant, short press to exit voice assistant.

Low Power Mode
When the battery voltage is less than 11V, the displays flashes and alarm. If it continues to flash for 10 minutes without any operation, the bluetooth will enter the low-power mode automatically.（This function is to protect the car battery. Some cars after turned off and locked, the cigarette lighter is not powered off）

Warm tips

1.  Do not turn the radio volume too high (usually 18 or below) to avoid the increase of the sound back noise.
2. Although the transmission power of this product is relatively strong, you’d better skip the frequency with strong signal in local to get a better sound quality
3. Do not use this product in a dusty and humid environment with extremely high and low temperatures.
4. Do not drop the product to avoid surface damage or breakdown.
5. Do not disassemble the product, if you have any questions, please contact your dealer.
6. Due to continuous improvement and enhancement of technology, changes in product performance and functionality are subject to change without notice.
   

Troubleshooting

Power is not responding or not displayed| 1. Check if the machine is in good contact with the cigarette port, and the cigarette holder is not seriously rusted.

2. Unplug and re-try again

3. Check if the cigarette holder is powered normally

---|---
Can’t play| 1. Check if the USB device is

connected to the player or not, or you can try another USB device.

2. Please make sure that there is copy of the file in the USB device that can be supported by the product.

3. Please make sure the volume is not set to 0

There is

noise but no sound

| 1. Whether the product player is in a

pause state

2. Is the volume adjusted to 0 or small?

The audio of

car can’t receive sound

| 1. Make sure that the product FM

launch has been turned on.

2. Is the transmission frequency of the

product the same as the reception frequency of car’s?

The launching effect is not good, there is noise| 1. Make sure that there is no strong signal station at the frequency of the current transmission. When using it, adjust to the frequency of no radio

station to get better sound effect.．

Packaging accessories

• Main device
• Manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>