LA VAGUE LV-HD120 LED Projector Instruction Manual
- June 3, 2024
- LA VAGUE
Table of Contents
LV-HD120
LED Projector
INSTRUCTION MANUAL
PLEASE NOTE
- Please read the entire user manual carefully before using the projector.
- To ensure the stability of the power supply, use standard grounded power sockets.
- Only use a power source as indicated on the projector.
- Please do not open projector. There are no user-serviceable parts in the projector. Opening the projector will void warranty. If there is a problem with your projector contact your supplier.
- Please do not directly look into the projector lens. The bright light could damage your eyes.
- Please do not place projector on a surface that may block air flow from the vents. A soft fabric could prevent air flow. Place the projector on stable hard surface.
- Please keep projector away from any liquids. The projector is not water proof or water resistant and is not for use outside.
- To prevent electrical shock please keep projector away from moisture.
- Please turn off and unplug projector when not in use.
- Please use original packaging material when storing your projector.
PRODUCT OVERVIEW
1 On/Off button
2 Arrow keys
3 Confirm selection
4 Select input
5 Menu
6 Back
7 Lens
8 Adjust focus
9 Speaker
CONNECTIONS
10 Power connection 12V / 2A
11 HDMI input
12 USB input
13 3.5mm audio output
REMOTE CONTROL
- Decrease volume
- Menu
- Menu navigation
- Aspect ratio 16:9 / 4:3
- On / Off button
- Settings
- Change image orientation
- Select input
- Confirm selection
- Main screen
- Back
- Increase volume
- Mute
OPERATING INSTRUCTIONS
Connecting the power cable
Connect the power cord to the side of the projector and a power outlet.
Powering On
Press the ,”On/Off” button on the top of the projector or on the remote
control. When the power is turned on, the main screen appears.
There is an additional ,,On/Off” switch on the back of the projector. This
allows you to use the projector on the move due to the built-in battery (with
the switch in the ,”On” position). Please note: To charge the battery, the
switch must be in the “On” position. The battery will not be charged when the
switch is in the ,”Off” position.
If you are not going to use the projector, we recommend that you set the
switch to ,”Off” to avoid discharging the battery.
Image focusing
Use the side dial (8) to adjust the image focus.
PLAYBACK
USB
Connect a USB device to the appropriate input located on the side of the
projector.
Select the media source ,”USB” (icon at the bottom left) and then select the
desired media (photo/music/movie/text).
Then select the file(s) you want to view and press the ,”OK” button on the remote control.
The following formats are supported:
| Foto | JPG BMP PNG |
|---|---|
| Music | MP3 AAC |
| Movie | MKV(H264/MPEG4/DIVX4/MPEG2) |
AVI(H264/MPEG4/DIVX4/H263/MGPEG)
MOV/MP4(H264/MPEG4/DIVX4/MPEG2/MPEG1/H263/MJPEG)
TS(H264/MPEG2)
ASF(H264/MPEG4/DIVX4/MPEG2/MPEG1/H263/MJPEG)
FLV(H264/H263)
PMP(H264/MPEG4G)
MPG/VOB(MPEG2/MPEG1)
Text| TXT
HDMI device connection
Connect a computer or other HDMI device to the corresponding input on the side
of the projector and select the media source ,”HDMI”.
3.5mm output for audio devices
Connect headphones and other supported audio devices with a 3.5mm jack plug to
the corresponding output on the side of the projector.
MENU
Press the ,”Menu” button to make further adjustments to your projector.
SELECT INPUT
Press the ,”Select Input” button to select “HDMI” or “Multimedia” (via USB) as the picture source.
TECHNICAL DATA
| Light source | LED |
|---|---|
| Display method | LCD |
| Contrast | 1000:1 |
| Physical resolution | 480 x 320 (unterstützt 1920 x 1080) |
| Projection distance | 0,9 – 4m |
| Image format | 16:9 / 4:3 |
| Brightness | 600 Lumen |
| Battery | 7,4V / 2000mAh |
| Mains connection | 110 – 240V / 50 – 60Hz |
| Power | 25W |
| Input interfaces | USB / HDMI |
| Output interface | 3,5mm Klinke |
| Dimensions | 140 x 102 x 66 mm |
| Weight | 0.36kg |
DISPOSAL
This symbol indicates that this product is subject to the European Directive and must not be disposed of together with other household waste. Refer to and follow local regulations for separate collection of electrical and electronic equipment. Proper disposal of old products helps to avoid negative effects on the environment and health.
MANUFACTURER
VEHNS GROUP GmbH
Theatinerstraße 40-42
80333 Munich
Germany
www.vehnsgroup.com
service@vehnsgroup.com
www.lavague.de
MADE IN CHINA
Changes and errors excepted.
The manufacturer accepts no liability for damage resulting from incorrect,
improper or incompatible use of the product.
© VEHNS GROUP GmbH
Version 1.0 - 05/2021
VEHNS GROUP
Theatinerstraße 40-42, 80333 Munich, Germany