tp-Link SM6110-LR 25G Base LC Transceiver Installation Guide

tp-Link SM6110-LR 25G Base LC Transceiver

Product Specifications

• Normal Wave Length: 850 nm
• Standards and Protocols: IEEE 802.3ae, IEEE 802.3by, SFF-8402, SFF-8431, SFF-8432, SFF-8472, eCPRI, CPRI, TCP/IP
• Cable Max. Cable Length: MMF 50/125 um – 70 m (OM3) @25.78Gbps, 100 m (OM4) @25.78Gbps, 300 m (OM3) @10.31Gbps
• Data Rate: 10.31 Gbps/25.78 Gbps
• Port Type: LC Duplex
• Power Support: 3.3 V
• Safety & Emission: FCC, CE, RoHS
• DDM: Yes
• SFP28 MSA Hot Swappable
• Operating Temperature: 10% to 90% RH Non-condensing
• Storage Temperature: 5% to 90% RH Non-condensing

Product Usage Instructions

Install the Transceiver:

1. Wear an ESD-preventive wrist or ankle strap to prevent ESD damage to the transceiver.
2. Insert the transceiver into the slot and firmly press it into place.

Remove the Transceiver:

1. Wear an ESD-preventive wrist or ankle strap to prevent ESD damage to the transceiver.
2. Disconnect the network fiber-optic cables from the transceiver.
3. Remove the protective dust plug from the transceiver.
4. Pull the safety latch downwards to release the transceiver, and then pull it out from the slot.
5. Plug fiber-optic cables into the transceiver. Note that the transceiver works without any additional configuration.
6. Reinstall the protective dust plug in the transceiver’s optical bores and place it on an antistatic mat or a static shielding bag.

Note: Do not touch the output pins on the transceiver with your hand. Always keep the protective dust plug on the transceiver’s optical bores until you are ready to make a connection.

Caution: DO NOT point or stare directly into the beam or into the optical port of the transceiver when it is operating, as this can injure your eyesight.

Connection:
Only use the same transceiver model between switches for fast and reliable connectivity. For simplicity, we will take SM6110-SR as an example.

Safety Information:
Keep the device away from water, fire, humidity or hot environments. Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us. Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning. Do not point or stare directly into the beam or into the optical port of the transceiver when it is operating, as this can injure your eyesight.

Frequently Asked Questions (FAQ):

• Q: Can I use this transceiver with devices from other vendors?
  A: The transceiver may be incompatible with other vendors’ devices. It is recommended to use only TP-Link transceivers on your TP-Link devices.

• Q: How does the auto-configuration work for this transceiver?

• A: When plugged into a switch port of 25Gbps, the module works at the speed of 25Gbps; for a switch port of 10Gbps, it automatically changes the speed to 10Gbps.

Installation Guide
25GBase SFP28 LC Transceiver

• To ask questions, find answers, and communicate with TP-Link users or engineers, please visit https://community.tp-link.com/business to join TP-Link Community.
• For technical support and other information, please visit https://www.tp-link.com/support/?type=smb , or simply scan the QR code.

Note: The transceiver may be incompatible with other vendors’ devices. We recommend that you use only TP-Link transceivers on your TP-Link devices.

Install the Transceiver

1. Wear an ESD-preventive wrist or ankle strap to prevent ESD damage to the transceiver.
2. Insert the transceiver into the slot and firmly press it into place.
3. Remove the protective dust plug from the transceiver.
4. Plug fiber-optic cables into the transceiver. Note that the transceiver works without any additional configuration.

Remove the Transceiver

1. Wear an ESD-preventive wrist or ankle strap to prevent ESD damage to the transceiver.
2. Disconnect the network fiber-optic cables from the transceiver.
3. Pull the safety latch downwards to release the transceiver, and then pull it out from the slot.
4. Reinstall the protective dust plug in the transceiver’s optical bores and place it on antistatic mat or a static shielding bag.

Note:

1. Do not touch the output pins on the transceiver with your hand.
2. Always keep the protective dust plug on the transceiver’s optical bores until you are ready to make a connection.

Caution:
DO NOT point or stare directly into the beam or into the optical port of the transceiver when it is operating, as this can injure your eyesight.

Connection

• Only use the same transceiver model between switches for fast and reliable connectivity.
• For simplicity, we will take SM6110-SR as an example.
• Note: This transceiver supports auto-configuration. When plugged into a switch port of 25Gbps, the module works at the speed of 25Gbps; for a switch port of 10Gbps, it automatically changes the speed to 10Gbps.

Specifications

Safety Information

• Keep the device away from water, fire, humidity or hot environments.
• Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
• Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning.
• Do not point or stare directly into the beam or into the optical port of the transceiver when it is operating, as this can injure your eyesight.

EU declaration of conformity

• TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2011/65/EU and (EU)2015/863.
• The original EU declaration of conformity may be found at https://www.tp-link.com/en/support/ce/

UK declaration of conformity

• TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Electromagnetic Compatibility Regulations 2016 and Electrical Equipment (Safety) Regulations 2016.
• The original UK Declaration of Conformity may be found at  https://www.tp-link.com/support/ukca/

FCC compliance information statement

• Product Name: Omada 25GBase-SR SFP28 LC Transceiver/Omada 25GBase-LR SFP28 LC Transceiver
• Model Number: SM6110-SR/SM6110-LR
• Responsible party: TP-LINK CORPORATION PTE. LTD.
• Address: 7 Temasek Boulevard #29-03 Suntec Tower One, Singapore 038987
• Website: https://www.tp-link.com/us/
• Tel: +1 626 333 0234
• Fax: +1 909 527 6804
• E-mail: sales.usa@tp-link.com
• This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
• This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
  1. This device may not cause harmful interference.
  2. This device must accept any interference received, including interference that may cause undesired operation.
• Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
• We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.
• Issue Date: 2023/10/31

Industry Canada Statement
CAN ICES-3 (A)/NMB-3(A)

CE Mark Warning
This is a class A product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.

Explanation of the symbols on the product label

Symbols may vary from products . The label is at the bottom of the product.

References

• Link: Simple, secure one-click payments
• Business Community
• CE Regulatory Compliance | TP-Link
• TP-Link Product Support - Wireless Networking Equipment Support
• Regulatory Compliance | TP-Link
• WiFi Networking Equipment for Home & Business | TP-Link

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>