Bushnell 202321 Golf Laser Rangefinder User Guide
- June 9, 2024
- Bushnell
Table of Contents
Bushnell 202321 Golf Laser Rangefinder
Model #: 202321, 202301
Date: 12-22
Product Information
The Golf Laser Rangefinder is a handheld device used to measure distances on a golf course. It uses laser technology to accurately measure the distance from the user to a specific target, such as a flagstick or hazard. The rangefinder has a visual JOLT indicator ring, line of sight distance, slope percentage grade (SHIFT model only), aiming circle, battery level, distance units (yards/meters),and Play As Distance (based on slope) (SHIFT model only).
Product Usage Instructions
- Remove the protective disc from the battery compartment.
- Press the Fire/Power button to activate the display and fire the laser.
- Rotate the eyepiece Fast Focus for a sharp display.
- Use the Mode button to access different features:
- Slope Switch enables/disables slope compensated ranging (SHIFT model #202321 only).
- To change unit of measure from yards to meters (Model #202301),press and hold the mode button until the Y is blinking. Then press the mode button to cycle between yards/meters. Press the fire button to confirm selection. Press fire button again to exit the screen.
The Display Guide provides useful information:
- Visual JOLT Indicator Ring
- Line of Sight Distance
- Slope (% grade) (SHIFT model only)
- Aiming Circle
- Battery Level
- Distance Units (Yards/Meters)
- Play As Distance (based on slope) (SHIFT model only)
Note: The Golf Laser Rangefinder is designed for use on a golf course only. Do not use it for any other purpose.
Basic Operation/Controls
- Remove protective disc from battery compartment.
- Press Fire/Power button to activate display and fire laser.
- Rotate eyepiece Fast Focus for sharp display.
- Mode Button
- Slope Switch enables/disables slope compensated ranging (Shift model # 202321 only).
Change unit of measure
Yards to Meters
Press and hold the mode button to enter the yards/meters setting. Yards are the default setting. Once the “Y” is blinking, press the mode button to cycle between yards/meters. Press the fire button to confirm selection. Press fire button again to exit the screen.
Display Guide
WARNING: AS WITH ANY LASER DEVICE, IT IS NOT RECCOMENDED TO DIRECTLY VIEW THE EMISSIONS FOR LONG PERIODS OF TIME WITH A MAGNIFIED LENS.
FDA Safety
CLASS 1 LASER PRODUCT
EN/IEC 60825-1 2014
Complies with 21 CFR 1040.10 and 1040.11 except for conformance with IEC60825-1 Ed. 3., as described in Laser Notice 56, dated May 8, 2019.
Caution: Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
- This product contains no user serviceable controls.
- This product must not be opened or modified by the consumer.
- This product must be returned to the manufacturer for service.
Device specifications and design are subject to change without notice or obligation on the part of the manufacturer.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device does not contain any user-serviceable parts. Repairs should only be
made by an Authorized Bushnell Repair center. Unauthorized repairs or
modifications could result in permanent damage to the equipment, and will void
warranty and your authority to operate the device under Part 15 regulations.
Specifications and design are subject to change without any notice or
obligation on the part of the manufacturer.
Disposal of Electric and Electronic Equipment
(Applicable in the EU and other European countries with separate collection
systems)
This equipment contains electric and/or electronic parts and must therefore
not be disposed of as normal household waste. Instead, it should be disposed
at the respective collection points for recycling provided by the communities.
For you, this is free of charge. If the equipment contains exchangeable
(rechargeable) batteries, these too must be removed before and, if necessary,
in turn be disposed of according to the relevant regulations (see also the
respective comments in this unit’s instructions). Further information about
the subject is available at your community administration, your local waste
collection company, or in the store where you purchased this equipment.
Industry Canada Statement
This device complies with ISED’s license-exempt RSSs. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Radiation Exposure Statement:
This device complies with the Industry Canada portable RF exposure limit set
forth for an uncontrolled environment and is safe for the intended operation
as described in this manual. Further RF exposure reduction can be achieved if
the product can be kept as far as possible from the user’s body or if the
device is set to a lower output power if such function is available.
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may
cause undesired operation of the device.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
International Support Resources
Australia
sales@championsports.com.au
Customer Service:
800-423-3537
www.bushnellgolf.com
©2022 Bushnell Outdoor Products
http://bushnellgolf.com/patents
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>