Besun BB008 Baby Swing Chair User Manual

Besun BB008 Baby Swing Chair

Product Introduction

Product Specification:

Product Features

1. Seat cover made of environmentally friendly super soft fabric and non-textile, cozy, breathable and safe & removable and machine washable seat fabric.
2. Controlled by touching screen or remote controller, easy to operate.
3. With built-in soft nature sounds & Bluetooth enabled for music.
4. Broaden aluminium alloy base bracket with mosquito net, offering a safe and comfortable space for baby.
5. Ergonomic seat chair with adjustable recline backrest, fit the baby’s neck and spine.

Make sure that all of the following parts listed are included in the box. If any part is missing, please contact us before operating. No tools are required for assembly.

1. Plush toy*2
2. Pillow*1
3. Mosquito net with canopy*1
4. Seat cover
5. Remote controller
6. Adaptor1, 2 meters of USB cable1
7. Seat frame*1
8. Base bracket*1

Installation

For Base Bracket

• Assembling: Put the frame in the base with “ ” shape components aligned.
• Disassembling: Pull out of the sheet metal and pull up the seat frame.

For Pillow and Seat Cover

Installation:

1. Put the seat cover on the seat frame completely from up to down, attach the velcro on the back and zip up.
2. Attach the pillow to the top retaining ring of the seat frame and press the velcro of the pillow.

Disassembly

1.  Unzip and pull off the velcro to remove the seat cover.
2. Tear the velcro to pull off the pillow.

For Canopy With Toys

Installation:

Attach the toys on the canopy and fasten the clasps to the pipe of the seat frame, and attach the mosquito net to the bottom of the seat frame.

Dismantling:

Put out of the clasps to remove the canopy.

Safety Belt Instruction

Place the baby into the swing and let his legs across both sides of the crotch support restraint, then turn the crotch support cover up. Adjust the seat belt on both sides and buckle up.
Note: Be sure to use the safety belt correctly when your baby lie on the baby swing for the safety of your child. Buckle off when you take your baby out of swing.

Adjustable Backrest Guidance

• Adjustable backrest: Hold two side steel tube, lift up to adjust recline of the backrest
• Detach backrest Press buttons on left and right side and press down to detach

Cautions: Infants and children are not allowed to stay in the swing during the above operation Above picture is for assebly installation only, product please refer to the actual.

Warning:

Guardians should take good care of their child, prohibit to play with accessories and avoid getting hurt or swallowed!

User Instruction

Button description

• ON/OFF: Touch this button and the indicator light is on. Touch it again to turn the swing off.
• SWING: Touch the button to make swing gear settings. There are five swing gears indicated by digital light: 0-1-2-3-4-5.
• TIMER: Touch the button to set the time. The first touch will have the swing chair swing for 8 minutes, the second touch will have it swing for 15 minutes, and the third will have it swing for 30 minutes.
• MUSIC: Touch the button to play the built-in music. Touch it again to turn the sound off.
  • • Turn on the bluetooth on smart phone and connect with”BT_BABY”. The swing beeps, and then bluetooth is now connected well. Then the music from cellphone plays.
  • • Music priority: Bluetooth>Built-in music
• VOLUME + : Touch the button to increase the volume gradually.
• VOLUME – : Touch the button to decrease the volume gradually.

Swing lock

• Toggle switch down: Lock up and the baby swing can not swing.
• Toggle switch up: The baby swing can swing again.

Remote Control

Power supply

1. DC plug can be inserted into 100-240V ~ 50 / 60Hz AC power supply.
2. The DC interface can be connected to the power bank (the power bank output is
3. Adapter output parameters: voltage is 5V and current is 1A.

WARNING

1. The power terminals must not be short-circuited.
2. Do not use adapters other than those supplied with this product to power the product.
3. Keep children away from working adapters.
4. Check the adapter cable connection regularly.

WARNING

• Fall hazard: Babies have suffered skull fractures falling while in and from bouncers.
• Use bouncer ONLY on floor
• ALWAYS use restraints and adjust to fit snugly, even if baby falls asleep.
• NEVER lift or carry a baby in the bouncer. Suffocation hazard: Babies suffocate when bouncers tip over on soft surfaces.
• NEVER use on a bed, sofa, cushion, or other soft surface.
• NEVER leave the day unattended

To prevent falls and suffocation:

• ALWAYS use restraints and adjust to fit snugly, even if baby falls asleep.
• STOP using bouncer when baby starts trying to sit up or has reached 9KG, whichever comes first.
• To avoid injury ensure that children are kept away when unfolding and folding this product.
• Do not let children play with this product.
• Transformers used with the infant swing are to be regularly examined for damage to the cord, plug, enclosure and other parts, and in the event of such damage, they shall not be used.
• The infant swing shall only be used with the recommended transformer.
• FALL and STRANGULATION HAZARDS: Infants have suffered head injuries Falling from swings and have strangled in straps
• ALWAYS use restraints. Adjust to fit snugly.
• STOP using the product when the infant attempts to climb out( approximately 6 months)
• Stay near and watch baby during use. This product is not safe for sleep or unsupervised use. if the baby falls asleep, remove baby as soon as possible and place baby on a firm, flat sleep surface such as a crib or bassinet.
• SUFFOCATION HAZARDS: Young infants have limited head and neck control. If the seat is too upright, the infant’s head can drop forward and compress the airway. ALWAYS keep swing seat fully reclined until infants at least 4 months old AND can hold up head without help.

FCC Compliance Statement

FCC Compliance Statements This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The base bracket should be installed and operated with minimum distance 10cm between the radiator and your body.

Clean & Maintenance

Clean

1. Clean the base bracket and seat frame with wet cloth and a mild detergent. Dry thoroughly then. Please do not use corrosive cleaner.
2. Removable and washable fabric
   • Seat fabric: Clean it with wet cloth and a mild detergent, and dry it.
   • Canopy: Take it off and put a little cleaner, wash it gently by hands. Rinse it with clean water, and then hang it to dry, avoiding exposure to the sun.
   • Pillow: Tear the Velcro off and take the pillow off. Put a little cleaner, wash it gently by hands, and then rinse it with clean water. Hang it avoiding sun exposure.

Maintenance

1. Please check this baby swing regularly. Make sure of each part is well connected and well installed. Stop using for poor connection and connect/install it again if necessary.
2. This product contains electronic components, which shall not be used in water or in a humid environment. Please ensure the product is dry, and store it in a cool and dry place, avoiding direct sunshine for a long time.

Troubleshooting

Fast self-inspection solution below

Note: For other trouble, please contact our customer service for help. Never disassemble and repair the swing by yourself.

After-sales Service

Thank you for purchasing our products. For your due rights and interests, please take good care of the warranty card. If there is any quality problem, please contact with the distributor.

Note:

1. From the purchase date, normal users can enjoy one year’s free maintenance service for the circuit board components and one year’s free maintenance service for the whole machine.
2. Other consumables and accessories are not covered by the warranty.
3. Please show the warranty card and purchase certificate or invoice to be valid.

Non-warranty Coverage:

1. Improper use
2. Loss or damage of warranty card
3. Damage caused by natural disasters and other irresistible forces Please keep the warranty card well.

Warranty Card

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>