Besun BB702 Baby Swing Chair User Manual
- June 1, 2024
- Besun
Table of Contents
Besun BB702 Baby Swing Chair
Product Specification
Product Features
- Swinging from side to side, with five gears mimicking human movement.
- Protecting baby’s spine design based on human engineering.
- Power supplied by safe 5V low voltage adapter.
- One-button installation and disassembly, are simple and convenient to use.
- The seat cover is made of environmentally friendly super soft fabric and non-textile, cozy, breathable, safe & removable, and machine washable seat fabric.
- Made of a strong iron base bracket with lightweight and strong hardness guarantees safety for the baby.
- Controlled by touching a screen or remote controller, easy to operate
- With motion lock and safety belt for protection.
- With built-in soft nature sounds & Bluetooth enabled for music.
Parts Instruction
Make sure that all of the following parts listed are included in the box. If any part is missing, please contact us before operating. No tools are required for assembly.
- Plush toy* 2
- Pillow*l
- Mosquito net with canopy* 1
- Seat cover
- Remote controller
- Adaptor I, 2 meters of USB cable I
- Seat frame* 1
- Base bracket* 1
Installation
For Base Bracket
- Assembling: Put the frame in the base with the shape components aligned.
- Disassembling: Pull out of the sheet metal and pull up the seat frame.
For Pillow and Seat Cover
- Installation: Attach the pillow to the top retaining ring of the seat frame and press the Velcro of the pillow.
- Removing: Pull off the Velcro to detach the pillow and unzip to remove the seat cover.
For Canopy With Toys
- Installation: Attach the toys to the canopy fasten the clasps to the pipe of the seat frame, and attach the mosquito net to the bottom of the seat frame.
- Dismantling: Put out of the clasps to remove the canopy.
Safety Belt Instruction
- Place the baby into the swing and let his legs across both sides of the crotch support restraint, then turn the crotch support cover-up. Adjust the seat belt on both sides and buckle up.
- Note: Be sure to use the safety belt correctly when your baby lies on the baby swing for the safety of your child. Buckle off when you take your baby out of the swing.
User Instruction
Button Description
- Power On/Off Key
- Music Play/Pause Key
- Music Switch & Volume Up/Down Key
- Five Swing gears
- Timer setting, 3 preset option
Button instruction
-
Power On/Off Key: Touch this button and the indicator light is on. Touch it again to turn the swing off.
-
Swing Gear Setting: Touch the button to adjust the swing settings There are five gears of the swing the swinging angle: Ox-00, 1 x- 1 80,2x-21 0,3x-230,4x-250,5x-31 0, the swing angle will be smaller after loading
Note:- When gearing 0 under no timer setting, the gear indicator light and timer light are both on;
- Automatically back to Gear O when inspected unusual swinging or strike by something
-
Timer Setting: Touch the button 1-3 times to choose the swing time 8/15/30 minutes
-
Music Play: Touch the button to play the built-in music. Touch it again to turn the sound off
-
Volume Up/Down:
- Touch the button in 1 second to adjust the volume,
- Touch the button in 2-3 seconds to play the next song.
-
Open the Bluetooth connection of the mobile phone to “BT BABY2”,and the song can be played directly after the connection is successful
Scan the QR code to download and install the app for Android or iSO system, then follow the app instructions to start using the rocking chair
Motion Lock
- Push the motion to lock down to lock the seat frame and stop movement.
- Pull the motion lock up to unlock the seat frame and the baby swing will swing again.
Remote Control
Power Supply
- DC plug can be inserted into 100-240V 50 / 60Hz AC power supply.
- Adapter output parameters: voltage is 5V and current is IA.
WARNING
- The power terminals must not be short-circuited.
- Do not use adapters other than those supplied with this product to power the product.
- Keep children away from working adapters.
- Check the adapter cable connection regularly.
FALL and STRANGULATION HAZARDS:
Infants have suffered head injuries falling from swings and have been
strangled in straps
FALL HAZARD:
Children have suffered head injuries falling from rockers
- ALWAYS use restraints. Adjust to fit snugly
- STOP using the product when the infant attempts to climb out (approximately 9 months)
- Stay near and watch the baby during use. This product is not safe for sleep or unsupervised use
- If baby falls asleep, remove baby as soon as possible and place baby on a firm, flat sleep surface such as a crib or bassinet
- NEVER lift or carry baby in rocker
- STOP using the product when baby starts trying to sit up or has reached [maximum weight not to exceed 20 lbs.], whichever comes first
- ALWAYS place the rocker on the floor. Never use on any elevated surface
- SUFFOCATION HAZARD: Babies have suffocated when seats tipped over on soft surfaces
- NEVER use on a bed, sofa, cushion, or other soft surface
- Stay near and watch the child during use. This product is not safe for unsupervised use or unattended sleep
FCC Compliance Statements
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Note:
This equipment has been tested and found to comply with the limits for a Class
B digital device, under Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used by the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution:
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The base bracket should be installed and operated with a minimum distance of 10cm between the radiator and your body.
- Unique Identifier Trade Name: BABY SWING
- ModelNo.: BB702A
Responsible Party – U.S.ContactlnformationUS
- Company Name: United Consulting Technology Services Co., Ltd.
- Address: 17800 CASTLETON STSTE 6651ndustry, CA91748 United States
Telephone number orinternet contactinformation:
- TEL: (626)217-4022
- E-mail: David@uc-ts.com.
Clean & Maintenance
Clean
- Clean the base bracket and seat frame with a wet cloth and a mild detergent. Dry thoroughly then. Please do not use corrosive cleaner.
- Removable and washable fabric
- Seat fabric: Clean it with a wet cloth and a mild detergent, and dry it.
- Canopy: Take it off and put a little cleaner, wash it gently by hand. Rinse it with clean water, and then hang it to dry, avoiding exposure to the sun.
- Pillow: Tear the Velcro off and take the pillow off. Put a little cleaner, wash it gently by hand, and then rinse it with clean water. Hang it avoiding sun exposure.
Maintenance
- Please check this baby swing regularly. Make sure each part is well connected and well installed. Stop using it for poor connection and connect/ install it again if necessary.
- This product contains electronic components, which shall not be used in water or a humid environment. Please ensure the product is dry, and store it in a cool and dry place, avoiding direct sunshine for a long time.
Troubleshooting
Fast self-inspection solution below
Note:
- For other trouble, please contact our customer service for help.
- Never disassemble and repair the swing by yourself.