home store more 145432 Farran Tower Solar Garden Water Feature Instruction Manual
- June 1, 2024
- home store more
Table of Contents
home store more 145432 Farran Tower Solar Garden Water Feature
Product Information
Specifications:
- Product Name: FARRAN TOWER SOLAR GARDEN WATER FEATURE
- Model Number: 145432
- Power Source: Solar Panel with Battery Pack
- Operating Hours: 6-8 hours on full battery charge with sunlight input
- Usage: Outdoor
Product Usage Instructions
Step 1: Base Setup
Place the base on a flat surface and insert the reservoir onto the base.
Step 2: Pump Installation
Read the user manual. Insert the water pump into the water tube.
Step 3: Fountain Assembly
Insert the fountain top on the reservoir and put the pump into the water. Ensure that the water level is higher than the pump. Make sure the water tube is properly connected to the pump without any crimping.
Step 4: Electrical Connection
Ensure the concave edge of the fountain top adheres to the convex part of the reservoir. Pass the electric wire through the wire opening. Connect the power cable to an outlet. The fountain should start flowing shortly after proper installation.
Step 5: Solar Panel Operation
For optimal performance, place the solar panel in direct sunlight. The pump can run for over 8 hours with strong sunlight input.
Cleaning and Maintenance
If the pump loses power or stops working, check for sediment or scale buildup. Remove any blockages or dirt, and periodically change the water to keep it clean. Use distilled water to prevent mineral build-up and improve the waterfall effect.
Safety Guidelines:
- Read all instructions and safety guidelines carefully to avoid injury or property damage.
- Avoid pumping flammable liquids with the fountain pump.
- Ensure proper connection of water tube to prevent blockages.
- Handle the pump with care during operation and do not move the product while in use.
FAQ
Q: How long does the pump run on a full battery charge?
A: The pump can run for approximately 6-8 hours on a full battery charge without sunlight input. With strong sunlight input, it can run for more than 8 hours.
Q: Can I use the product in adverse weather conditions?
A: It is not recommended to use the product in adverse weather conditions to ensure its longevity and proper functioning.
PLU: 145432 FARRAN TOWER SOL AR GARDEN WATER FEATURE
Thank you for purchasing this fine decorative fountain. This product combines
our latest design with a creative theme and is carefully packaged, inspected,
and tested to ensure safe operation. The following instructions and safety
guidelines will enable you to use the product for trouble-free operation.
Please read the instructions and safety guidelines entirely before using the
product.
The product consists of (1) Fountain Top (2) Reservoir (3) Solar Pump
Instructions for use
- Remove plastic bags from packaging. Read this instruction sheet before proceeding.
- Place the base on a flat surface and insert the reservoir onto the base.
- Read the user manual. Insert the water pump into the water tube.
- Insert the fountain top on the reservoir and put the pump into the water. The water should be higher than the pump.
- Make sure the water tube is properly connected to the pump and is not crimpled.
- The concave edge of the fountain top should adhere to the convex part of the reservoir. Be sure that the electric wire is passed through the wire opening.
- Connect the power cable to the outlet. If installed properly, water flow in the fountain will begin shortly.
- When the battery is fully charged and without any sunlight input, the pump will run for around
- hours. If with strong sunlight input, usually could run for more than 8 hours.
- Please do not use it in adverse weather conditions.
Please note: There may be air in the pump on first use. It may take several minutes until all the air escapes.
Safety Guidelines
- Read all instructions and safety guidelines thoroughly. Failure to follow guidelines and instructions could result in serious injury and/or property damage.
- Do not pump flammable liquids such as gasoline or fuel oil with the fountain pump.
- Make sure the water tube is properly connected with the pump and the upper layer, and the tube is not crimpled. This could cause a blockage, and water will not come out.
- During operation, the area around the pump will be covered with water. Take care when handling the pump; do not pull it out of the water (when running) by the power cord, and do not move the product while in operation.
- For the solar pump to operate, the solar panel needs to be in direct sunlight. This solar pump is equipped with a battery pack and can be switched on and off by a touch switch on the control box.
Cleaning and Maintenance
- If, after time, the pump starts to lose power or stops working, you should check for the build-up of sediment or scale at the bottom of the pump housing, or in the reservoir.
- Remove the blockage or any dirt and scale which may have built up and close the case back up.
- Periodically change the water and keep water clean. We recommend distilled water to prevent mineral build-up. This will improve the waterfall effect.
