onn AAGRY100043854 Portable Bluetooth CD Boombox with Digital FM Radio User Guide

: June 4, 2024
: Onn

Table of Contents

onn AAGRY100043854 Portable Bluetooth CD Boombox with Digital FM Radio
WHAT IS IN THE BOX
OVERVIEW
Button Functions in CD Mode
Bluetooth Mode (BT)
The Specs
FCC Warning
Read User Manual Online (PDF format)
Download This Manual (PDF format)

onn AAGRY100043854 Portable Bluetooth CD Boombox with Digital FM Radio

onn AAGRY100043854 Portable Bluetooth CD Boombox with Digital FM
Radio

WHAT IS IN THE BOX

A. 1 Portable Bluetooth CD Boombox
B. 1AC Power Cable 4.92 ft (150 cm)
C. 1Quick Start Guide

OVERVIEW

POWER
- Standby/power on
MODE/CLOCK-SET
- Switch to a different mode or set the clock
PREVIOUS/BT/TWS
- Play previous track/BT/TWS
PLAY/SCAN
- Play/pause/ autoscan for a station
NEXT
- Play next track
REPEAT/STOP/PROG
- In CD mode:
- Repeat a track/stop playback
- In Radio mode
- Save the station as a preset
VOL-
- Decrease the volume
VOL+
- Increase the volume

Setting Time
To set the time on your device:

Enter Standby mode
Press and hold the CLOCK-SET button
Press the buttons to select 12/24 hour format
Press the CLOCK-SET button
Press the /4 or /buttons to select the desired hour/minute
Press the CLOCK-SET button to confirm

FM Mode

To enter FM Mode:

Press the MODE button to switch to FM mode
Press and hold the SCAN button to automatically search through stations
Press the H4/4 or M»/H buttons (the adjusted FM frequency will jump to 0.1MHZ) to choose station. Press and hold /4or »/ to stop at the nearest station.

Setting and Selecting Presets

To set a preset:

Enter FM mode
Press and hold the REPEAT/STOP/PROG button
The screen will begin to flash
Press the M/4 or /Mbuttons to store your desired radio stations (1-20)
Press the REPEAT/STOP/PROG button to confirm

To select a preset:

Enter FM mode
Press the REPEAT/STOP/PROG button
Press the kM/4 or /l buttons to select the pre-stored station (1-20)
Press the REPEAT/STOP/PROG button to confirm

CD Mode
Press the MODE button to switch to CD mode, then insert your CD.

Button Functions in CD Mode

PLAY/PAUSE
Press to play; press again to pause.

REPEAT

Pressing the REPEAT button cycles through the following options:
Repeat current track
Repeat all
Automatic song selection

STOP
Press to STOP playing a trock

Bluetooth Mode (BT)

Press the MODE/CLOCK-SET button to switch to Bluetooth mode. The Bluetooth icon will flash on the display.
Turn on Bluetooth on your mobile device and search for “onn cd bmbx gy” to connect.
The Bluetooth icon on the display will stop flashing once connection is successful.
You may now stream content from your mobile device to the boombox.

AUX Mode

Press the MODE button to switch to AUX mode. Connect an AUX cable into the AUX jock located on the front panel of the device to play music from external devices.

TWS Mode

This device features Tws (True Wireless Stereo) technology. which allows you to play music on two onn. CD boomboxes simultaneously, creating a surround sound experience.

Make sure both boomboxes are turned on and Bluetooth mode is enabled. The Bluetooth” icon will flash on both boombox displays.
Press and hold the PLAY button on either unit to connect to another onn. CD boombox. A prompt will play, sending a pairing request to your mobile device.
Once you accept the request, another prompt will play, indicating a successful connection.
You may now stream content from your mobile device, and it will play on both boombox units.

The Specs

Digital FM Radio
Function Modes: FM/CD/BT/AUX/Tws
Bluetooth 5.0
3.5 mm AUX In
RMS: 5W (2.5W x 2) output
Range: 33 ft (10 m)
AC input: 100-240
Requires 6 C-cell batteries (not included)

FCC Warning

This device comples with Part 15 of the FCC Rules Operation is subject to the following two conditions

this cdevice may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation

CAUTION: Changes or modifications to this product not expressly opproved by the party responsible for compliance could void the user’s authority to operate the equipment This equipment has been tested and found to comply with the limits for a Coss B digital dievice, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonatle protection against harmful interference in a residentil installotion. This equipment generates, uses and can radiate radio frequency energy and, if not instaled and used in accordance with the instructions, may cause harmful interference to radio communications However, there is no guarantee that interference will not occur in a particukar installation. IF this equipment does cause harmful interference to radio or teevision reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the deder or an experienced radio/TV technician for help.

To maintain compliance with FcC’s RF exposure guidelines, this equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

Additional Warnings. and.Precautions

CAUTION:

To prevent electric shock, match the wide blade on the plug to the wide sot on the outlet and fully insert.
The mains plug is used as disoonnect device and it should remain readily operatle during intended use.
In order to disconnect the apparatus from the mains completely, the mains plug should be disconnected from the mains socket outet completely Caution marking is located at the rear or bottom of the apparatus.
Use of contros or adjustments or performance of procedures other than those specifñed may result in hazardous radiation exposure
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

WARNING :

To reduce the risk of fre or electric shock, do not expose this apparatus to rain, moisture, dripping, or spkashing
Use of contros or adjustments or performance of procedures other than those specifñed may result in hazardous radiation exposure
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment
Do nat place this unit directly onto furniture surfaces with any type of soft, porous, or sensitive finish. As with any rubber compcund made with
oils, the feet could cause marks or staining where the feet reside.
We recommend using a protective barrier such as a cloth or a piece of glass between the unit and the surface to reduce the risk of damage and/or staining.
Shock hazard -Do Not Open
Battery shall not be exposed to excessive heat such as sunshine, fire or the lke
Keep new and used batteries away from children.
if the battery compartment does not close securely, stop using the product and keep it away from the children
DO NOT INGEST BATTERY. CHEMICAL BURN HAZARD.
If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
if the coin/button cell battery supplied with this product is swallowed, it can cause severe internal burns in just 2 hours and can lead to death
Completely replace all old batteries with new ones.
Batteries should be recycled or disposed of as per state and local guidelines.
This equipment is a Class l or double insulated electrical appliance.
It has been designed in such a way that it does not require a safety connection to the electrical earth.
This lightning flash with arrow head symbol within an equilateral triangle is intended to alert the user to the presence of non-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
To reduce the risk of electric shock, do not remove cover (or back) as there are no user-serviceable parts inside. Refer servicing to qualified personnel
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance instructions in the Literature accompanying the appliance.
This product utilizes a Class 1 laser to read Compact Discs. This laser Compact Disc Player is equipped with safety switches to avoid exposure when the CD door is open and the safety interlocks are defeated. visible laser radiation is present when the CD layer’s lid is open and the system is has failed or been defeated.
It is very important that you avoid direct exposure to the laser beam at all times.
Please do not attempt to defeat or bypass the safety switches.
Exposure to certain lasers can cause eye damage
Do not mix old and new batteries and do not mix alkaline, standard (carbon-zinc) or rechargeable Ini-cod, ni-me, etc] batteries.