P8 Magnetic Wireless Charger Power Bank User Manual
- June 1, 2024
- Magnetic
Table of Contents
P8 Magnetic Wireless Charger Power Bank
Specifications
- Magnetic Wireless Charger Power Bank
- Input: 5V 3A 9V 2A
- USB-C Output: 5V 3A 9V 2.22A 12V 1.5A
- Wireless Phone Output: 15W Max
- Earphone Output: 5W Max
- Interface: Type-C
- Battery Capacity: 5000mAh
- Rated Capacity: 2800mAh (5V 2.4A)
Product Usage Instructions
Charging Your Devices
- Connect the power bank to a power source using the provided USB-C cable.
- To charge your phone wirelessly, place it on the strong magnetic wireless charging area of the power bank.
- For wired charging, connect your device to the power bank using a compatible USB-C cable.
- Ensure the power bank indicator light is on to confirm charging is in progress.
Battery Status Indicator
The power bank indicator light displays the battery capacity as follows:
- 0%-25%: Wireless charging light constantly on
- 25%-50%: Power bank indicator light constantly on
- 50%-75%: Power button/Wireless charging light constantly on
- 75%-100%: Both lights constantly on
Compatible Devices
The power bank is compatible with devices that support wireless charging frequencies of 115-205kHz for phones (15W max), AirPods (5W max), and iPhones (360kHz, 7.5W).
Note:
Use a magnetic case on your phone to enable wireless charging with this power bank.
FAQ
Q: Can I charge multiple devices simultaneously?
A: Yes, you can charge a phone wirelessly while charging another device through the USB-C output simultaneously.
Q: How long does it take to fully charge the power bank?
A: The charging time depends on the power source output, but typically, it takes around X hours to fully charge the power bank.
Portable Power Bank
The Light of the power bank
Compatible Devices
115-205kHz：
phone 15W max
AirPods 5W max
360kHz：
iPhone 7.5W
Please use a magnetic case to charge your phone
Please Note
- Only use certified QC 3.0/PD Charging Wall Adapter to charge the device, do not plug into computer USB port or any other non-certified USB port.
- Place your Qi-enabled device accurately in the wireless charging area when charging.
- a QC 3.0/PD adapter is required when charging mobile phones can be quickly charged
- Make sure to disconnect the device from power when cleaning.
- lt is normal and safe to hear a humming noise when very close to the charger. lt means that this wireless charger is adjusting its temperature to achieve a more efficient charging speed.
- If your device can not be fully charged, this may due to high environmental temperature, please recharge after the temperature is lowered. Our charger has temperature control to safeguard your device when charging.
Important Safety Instructions
- Do not store device in high-temperature environment, including heat caused by intense sunlight or other forms of heat.
- Do not place device in fire or other excessively hot environments. Exposure to fire or temperature above 212°F(100C) may cause explosion.
- Do not use the wireless charger in excess of its output rating. Over loading outputs above rating may result in a risk of fire or injury to persons.
- Do not expose the wireless charger to rain or snow.
- Do not modify, repair or disassemble the unity, if so, please contact the manufacturer. Switch off the wireless charger when not in use. The wireless charger will automatically switch off when disconnected from its wall charger.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:(1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any Changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC RF exposure statement:
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
Thank you for you choosing our product
Made in China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>