Powerful Magnetic B8689 Vent Extender for Floor Under Furniture Installation Guide
- June 4, 2024
- Powerful Magnetic
Table of Contents
Powerful Magnetic B8689 Vent Extender for Floor Under Furniture
Specifications
| Feature | Description |
|---|---|
| Magnetic Surface Compatibility | Works with magnetic vent surfaces; test with a |
fridge magnet
Non-Magnetic Surface Compatibility| Includes double-sided 3M stickers for
adhesion
Adjustable Length| Parts A (13″), B, and C allow for lengths of 13″ (min) to
38″ (max)
Optional Stability| Transparent tape and additional 3M stickers for anchoring
FAQ
- What surfaces can the vent extender be installed on?
- The extender is compatible with both magnetic and non-magnetic surfaces such as wood, plastic, aluminum, and brass.
- What should I do if my vent surface is not magnetic?
- Clean the vent surface and use the included double-sided 3M stickers to attach the magnetic slot on part A for secure adhesion.
- How do I adjust the length of the vent extender?
- Use the magnetic part A as the base and slide parts B and C to achieve the desired length, ensuring slight overlap for stability.
INSTALLATION
VENT EXTENDER INSTALLATION GUIDE
Hello! Thank you for choosing our product. We are a small family business in the US, and we truly appreciate your support. We hope this magnetic air vent extender will be beneficial and efficient for you!
INSTALLATION
- Check if your vent surface is magnetic by testing it with a fridge magnet. If it sticks, it’s made of magnetic metal.
- If it is magnetic, skip step 2 and proceed to step 3.
- For non-magnetic vent surfaces like wood, plastic, aluminum, brass, etc., clean the vent surface to remove any dust or debris that may affect sticker adhesion. Attach each of the included double-sided 3M stickers to each magnetic slot on part A (4 stickers in total). Apply pressure to ensure secure adhesion.
- Use the parts’ letter indicators as a guide (refer to the provided image for assembly). Start with the magnetic part A (13″) on the vent.
- To reach 26″, slide part B onto A. For 38″, add part C under B. Ensure B overlaps both A and C, maintaining a slight overlap for stability.
- OPTIONAL:
- After achieving the desired length, apply transparent tape between parts for stability and enhanced air leakage protection.
- For additional anchoring, use the provided 3M stickers to affix the extenders to the floor.
IMPORTANT NOTE: If you wish to completely block the airflow through the vent, you can consider using our magnetic vent covers. Visit our website at www.hmmagnets.com to find the appropriate cover size using our size guide.
If you have any issues or questions, please feel free to reach out to us at info@hmmagnets.com. We strive to respond within 24 hours.
Best regards,
- Christa
- Founder of HMmagnets
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>