OZARKE SKØRTER Celestial Crystal Chandelier Instruction Manual
- June 1, 2024
- OZARKE
Table of Contents
OZARKE SKØRTER Celestial Crystal Chandelier
Specifications:
- Power Source: Electrical
- Materials: Crystal, Metal
- Voltage: Appropriate voltage as per location
- Assembly Required: Yes
- Tools Needed (not included): 1 x Screw Driver, 1 x Electric Drill, 2 x Gloves
Product Usage Instructions:
Step 1: Marking and Drilling
Use a pencil or pen to mark the drilling positions on the wall or ceiling.
Ensure to consider the wiring position. Use the hanging bracket as a guide.
Drill holes at the marked positions using an electric drill.
Step 2: Inserting Drywall Anchors
Insert drywall anchors into each drilled hole. Avoid damaging the anchors and
do not force them in. If the holes are too small, enlarge them carefully.
Step 3: Attaching Hanging Bracket
Screw the hanging bracket onto the wall using a screwdriver. Do not attach the
lamp at this point. This step will be completed after wiring.
Step 4: Hanging Crystal Components
Pass the pin through the hole in the crystal component, bend the pin as shown
in the image, then hang it in the lamp frame.
Step 5: Wiring and Connecting
Connect the lamp wires (Black – Live, White – Live, Yellow -Ground) to the
corresponding wall wires. Ensure proper insulation and tuck the wires neatly
inside the lamp or wall.
Step 6: Final Assembly
Hang the crystal rods as shown in the provided image, then complete assembling
the lamp frame. Attach the lamp body to the hanging board using the provided
chain.
Step 7: Testing
Once assembly is complete, you may turn on the electrical power and test the
lamp to ensure proper functionality.
FAQ:
Q: What should I do if any assembly parts are missing?
A: In case any assembly parts are missing, please reach out to our
customer service team for assistance.
Q: Can I rely on a wall switch for electrical safety?
A: No, always turn off electrical power from the panel before starting
any installation work. Do not rely solely on a wall switch for safety.
Thank you for shopping with Ozarké, we really appreciate your business. Our goal is to provide an excellent customer service before, during and after delivery. We’ve included a guide on how to install this light, should you require additional assistance please feel free to email us at info@ozarke.com and one of our customer service reps will reach out to assist you.
Before you get started:
Turn off electrical power to the fixture at the electrical panel. Use the
appropriate voltage tester to ensure no power is present at the fixture before
you begin work. Do not rely on a wall switch to protect you from electrical
shock. Installation requires an experienced electrician.
Assembly Inventory:
Please check the assembly inventory. If you find anything missing reach out to our customer service team.
Tools needed (not included):
- 1 x Screw Driver
- 1 x Electric Drill
- 2 x Gloves
Installation Instructions
Step 1:
Use a pencil or a pen to mark the drilling position. You can use the hanging
bracket to mark the position of the light. lt is very important to ensure you
account for the wiring position on your wall or ceiling.
Step 2:
Using a drill, drill holes into the wall where you marked in step 1
Step 3:
Insert drywall anchors into each hole. Don’t damage or force the anchor in the
hole. lf the hole is small, try to make the hole(s) bigger.
Step 4:
Screw the hanging bracket to the wall using a screw driver. Don’t attach the
lamp. This step to be completed after wiring.
Step 5:
Pass the pin through the hole in the crystal , then bend the pin as shown in
the image, then hang it in the hole of the lamp frame.
Step 6:
Hang the crystal rods as shown in image 1.1 (1st page), then finish assembling
the lamp frame.
Black Wire: Live, White wire: Live, Yellow wire: Ground Connect the lamp wires
to the wall wires, and tuck inside the lamp or inside the wall
Step 7:
Attach the lamp body to the hanging board using the provided chain.
Now you may turn your electrical power back on and test the lamp.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>