OZARKE SKØRTER Glass Globe Pendants Instruction Manual
- June 1, 2024
- OZARKE
Table of Contents
OZARKE SKØRTER Glass Globe Pendants
Specifications:
- Power Supply Range: 100-240V, 50Hz
- Indoor Use Only
- Do not expose to corrosive chemicals or gases
- Do not install outdoors
- Do not wash with water, clean with a soft cloth
- Lampshade Sizes: D=20cm (7.78”), D=30cm (11.81”)
Product Usage Instructions
Safety Precautions:
- Turn off the power supply before starting any work.
- Use appropriate tools designed for electrical work.
- Wear safety gear such as glasses and gloves.
- Test for electrical current before touching any wires.
- Avoid working in wet or damp conditions.
- Maintain a safe distance from exposed wires or components.
- Consult a professional electrician if unsure or encountering problems.
Installation Instructions:
- Secure the hanging panel to the ceiling.
- Connect the lamp wire to the power wire.
- Install the ceiling base and hanging panel together.
- Screw the bulb into the lamp holder.
- Screw the lampshade into the lamp holder.
- Adjust the wire length and secure it in place.
Additional Notes:
- Ensure the hanging panel is securely fixed for safety.
- Test the lamp before full installation to avoid rework.
- Conduct an electrical test after securing the lamp frame.
- Clean or replace the bulb only after turning off the power.
- Professional installation is recommended for safety and proper setup.
Frequently Asked Questions (FAQ):
Q: Can the lamp be installed outdoors?
A: No, the lamp is designed for indoor use only and should not be
installed outdoors.
Q: How should I clean the lamp?
A: Do not wash the lamp with water. Use a clean soft cloth to wipe the
surface gently.
Q: What should I do if I encounter wiring issues during installation?
A: It is recommended to consult a professional electrician to address any
wiring problems for safety reasons.
Thank you for shopping with Ozarké, we really appreciate your business. Our goal is to provide an excellent customer service before, during and after delivery. We’ve included a guide on how to install this light, should you require additional assistance please feel free to email us at info@ozarke.com and one of our customer service reps will reach out to assist you.
When working with electrical wiring, follow these safety instructions to prevent injury or damage:
- Turn off the power: Before starting any work, turn off the power to the area you will be working in.
- Use appropriate tools: Only use tools designed for electrical work and in good condition.
- Wear protective gear: Wear safety glasses, gloves, and other protective gear as necessary.
- Test for power: Use a non-contact voltage tester to check for electrical current before touching any wires.
- Avoid wet conditions: Do not work with electrical wiring in wet or damp conditions.
- Keep a safe distance: Stay away from exposed wires or electrical components.
- Seek professional help: Consult a qualified electrician if you are unsure about any aspect of electrical wiring or encounter any problems.
WARNING!
- Do not use the power supply beyond the specified range (100-240V,50Hz).
- Avoid scratching the surface and wires of the lamp during installation.
- Do not install the lamp outdoors.
- The lamp should not be close to corrosive chemical objects or gases.
It should not be washed with water. It can only be wiped with a clean soft cloth.
Installation Instructions
1| The hanging panel should be securely fixed to the ceiling to ensure
safety.
---|---
2| The lamp holder should be assembled and installed after a lamp test
to avoid potential ceiling rework due to wiring issues.
3| After securing the lamp frame to the ceiling, please conduct an
electrical test once more. After confirming it is in normal working condition,
proceed to attach and screw
on the lampshade.
4| Please have the lamp installed by a professional.
5| Please turn off the power before cleaning or replacing the bulb.
6| Please have the lamp installed by a professional.
Instructions
| 1 | Secure the hanging panel to the ceiling. |
|---|---|
| 2 | Connect the lamp wire to the power wire. |
| 3 | Install the ceiling base and hanging panel together. |
| 4 | Screw the bulb into the lamp holder. |
5
6
| Screw the lampshade into the lamp holder.
Adjust the wire length and then secure it in place.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>