MIKroTik RB4011iGS Wireless Routers User Guide

: June 1, 2024
: Mikrotik

Table of Contents

MIKroTik RB4011iGS Wireless Routers
Product Information
Product Usage Instructions
Quick Guide
Safety Information
Federal Communication Commission Interference Statement
CE Declaration of Conformity
Technical Specifications
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

MIKroTik RB4011iGS Wireless Routers

Product Information

Specifications:

Model: RB4011iGS+5HacQ2HnD-IN
Wireless network device
Default IP: 192.168.88.1
Wireless access point mode enabled by default

Product Usage Instructions

Connect your Internet cable to port 1, and local network devices to other ports.
Set your computer IP configuration to automatic (DHCP).
If not using POE, connect your direct input power jack to start up the device.
After a short beep, the wireless network will be available for connecting.
Open network connections on your device and search for MikroTik wireless network, then connect to it.
Open https://192.168.88.1 in your web browser to start configuration (no password by default).
Check for updates and update your RouterOS software to the latest version for best performance.
Choose your country and set up your password on the screen that loads.

Safety Information:

Be aware of electrical hazards and follow standard practices for preventing accidents.
Use only approved power supply and accessories from the original packaging.
Installation should be done by trained personnel following local electrical codes.
Avoid disassembly, repair, or modification of the device.
Keep the product indoors and away from water, fire, humidity, or hot environments.

Exposure to Radio Frequency Radiation:
This MikroTik equipment complies with EU radiation exposure limits. Keep at least 20cm distance from body or public.

In Case of Device Failure:
Disconnect the device from power by unplugging the power adapter from the outlet.

Operate with Care:
Use the product responsibly and at your own risk to prevent accidents or damage due to improper use.

FAQ:

Q: What should I do if I forget the password for configuration?
A: For some models, check user and wireless passwords on the sticker. Otherwise, you can reset the device to factory settings as a last resort.

Quick Guide

This device needs to be upgraded to RouterOS v7.10 or the latest stable version, to ensure compliance with local authority regulations!
It is the end users responsibility to follow local country regulations, including operation within legal frequency channels, output power, cabling requirements, and Dynamic Frequency Selection (DFS) requirements. All MikroTik radio devices must be installed according to instructions.
This Quick Guide covers models: RB4011iGS+5HacQ2HnD-IN
This is a wireless network device. You can find the product model name on the case label

Please visit the user manual page on https://mt.lv/um for the full up to date user manual. Or scan the QR code with your mobile phone.
The most important technical specifications for this product can be found on the last page of this Quick Guide.
Technical specifications, brochures, and more info about products at https://mikrotik.com/products
Configuration manual for software in your language with additional information can be found at https://mt.lv/help
If you need help with configuration, please seek a consultant https://mikrotik.com/consultants

First steps:

Connect your Internet cable to port 1, and local network devices to other ports.
Set your computer IP configuration to automatic (DHCP).
Wireless access point mode is enabled by default.
Connect your direct input power jack if not using POE, to start up the device.
The device will boot up and after a short beep Wireless network will be available for connecting.
Open network connections on your PC, mobile phone, or other device and search for MikroTik wireless network, and connect to it.
Once connected to the wireless network, open https://192.168.88.1 in your web browser to start configuration, since there is no password by default, you will be logged in automatically (or, for some models, check user and wireless passwords on the sticker).
We recommend clicking the “Check for updates” button and updating your RouterOS software to the latest version to ensure the best performance and stability.
Choose your country, to apply country regulation settings, and set up your password on the screen that loads.

Safety Information

Before you work on any MikroTik equipment, be aware of the hazards involved with electrical circuitry, and be familiar with standard practices for preventing accidents. The installer should be familiar with network structures, terms, and concepts.
Use only the power supply and accessories approved by the manufacturer, and which can be found in the original packaging of this product.
This equipment is to be installed by trained and qualified personnel, as per these installation instructions. The installer is responsible for making sure, that the Installation of the equipment is compliant with local and national electrical codes. Do not attempt to disassemble, repair, or modify the device.
This product is intended to be installed indoors. Keep this product away from water, fire, humidity, or hot environments.
We cannot guarantee that no accidents or damage will occur due to the improper use of the device. Please use this product with care and operate at your own risk!
In the case of device failure, please disconnect it from power. The fastest way to do so is by unplugging the power adapter from the power outlet.
This is a Class A product. In a domestic environment, this product might cause radio interference in which case the user might be required to take adequate measures
Exposure to Radio Frequency Radiation: This MikroTik equipment complies with the European Union radiation exposure limits set forth for an uncontrolled environment. This MikroTik device should be installed and operated no closer than 20 centimeters from your body, occupational user, or the general public.

Manufacturer : Mikrotikls SIA,Unijas 2,Riga, Latvia, LV1039.

Federal Communication Commission Interference Statement

Model	FCC ID	Contains FCC ID
RB4011iGS+5HacQ2HnD-IN- US	TV74011GS- 5HQ2HD	TV7R11E2HPN D

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note : This unit was tested with shielded cables on the peripheral devices. Shielded cables must be used with the unit to ensure compliance.
Exposure to Radio Frequency Radiation: This MikroTik equipment complies with the FCC and IC radiation exposure limits set forth for an uncontrolled environment. This MikroTik device should be installed and operated no closer than 20 centimeters from your body, occupational user, or the general public.

Innovation, Science and Economic Development Canada

Model	IC ID	Contains IC
RB4011iGS+5HacQ2HnD-IN-	7442A-	7442A-
US	4011G5Q2	R11E2HPND

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
This Class B digital apparatus complies with Canadian ICES-003.
CAN ICES-003 (B) / NMB-003 (B)
The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.

Exposure to Radio Frequency Radiation: This MikroTik equipment complies with the FCC and IC radiation exposure limits set forth for an uncontrolled environment. This MikroTik device should be installed and operated no closer than 20 centimeters from your body, occupational user, or the general public.
UKCA marking

CE Declaration of Conformity

Hereby, Mikrotīkls SIA declares that the radio equipment type RB4011iGS +5HacQ2HnD-IN is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://mikrotik.com/products

WLAN

Operating Frequency / Maximum output power 2400-2483.5 MHz / 20 dBm

This MikroTik device meets Maximum WLAN transmit power limits per ETSI regulations. For more detailed information see Declaration of Conformity above
The WLAN function for this device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range.