MIKroTik mANTBox 52 15s Wireless Routers User Guide

: June 1, 2024
: Mikrotik

Table of Contents

MIKroTik mANTBox 52 15s Wireless Routers
Product Usage Instructions
Quick Guide
Safety Information
Exposure to Radio Frequency Radiation
CE Declaration of Conformity
Technical Specifications
57198
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

MIKroTik mANTBox 52 15s Wireless Routers

Specifications:

Model: RBD22UGS-5HPacD2HnD-15S (mANTBox 52 15s)
Manufacturer: Mikrotikls SIA
Country of Origin: Latvia
RouterOS Version: v7.3.1
Antenna: mANTBox 52 15s
Default IP: 192.168.88.1
Wireless Network Password Requirement: Minimum of eight symbols

Product Usage Instructions

Connection and Initial Setup:

Open the cover of the device.
Connect an Ethernet cable from your computer to the Ethernet port of the device.
Plug the device into a power source.
Download the WinBox configuration tool from https://mt.lv/winbox.
Access the device using the default IP (192.168.88.1) and username (admin). No password is required.

Configuration and Settings:

Configure the device to establish an active Internet connection by visiting https://mt.lv/configuration.
Upgrade the RouterOS software to the latest version by following the instructions at https://mt.lv/upgrade.
In the QuickSet menu, select your country to apply country regulation settings.
Adjust the antenna gain based on the antenna used.
Set the installation setting to ‘Outdoor’.
Set up your wireless network password with a minimum length of eight symbols.
Create a router password for login authentication.

Safety Information:
Before working on the device, ensure you are aware of electrical hazards and follow standard safety practices. Use only approved power supplies and accessories provided by the manufacturer. Installation should be done by trained personnel following local electrical codes. Do not attempt to disassemble, repair, or modify the device.

Mounting Instructions and Radio Frequency Safety:
This product is designed for outdoor pole mounting. Follow mounting instructions carefully to prevent hazardous situations and damage. Maintain a distance of at least 25 centimeters from your body or others when operating the device to comply with radiation exposure limits.

FAQ:

Q: What should I do in case of device failure?
A: In case of device failure, disconnect it from power immediately by unplugging the power adapter from the outlet.

Models : RBD22UGS-5HPacD2HnD-15S (mANTBox 52 15s)

Quick Guide

This device needs to be upgraded to RouterOS v7.3.1 or the latest stable version, to ensure compliance with local authority regulations! It is the end users’ responsibility to follow local country regulations, including operation within legal frequency channels, output power, cabling requirements, and Dynamic Frequency Selection (DFS) requirements. All MikroTik radio devices must be installed according to instructions. This “mANTBox 52 15s” series Quick Guide covers models: RBD22UGS-5HPacD2HnD-15S (mANTBox 52 15s).

This is a wireless network device. You can find the product model name on the case label (ID).
Please visit the user manual page on https://mt.lv/um for the full up-to-date user manual. Or scan the QR code with your mobile phone.
Technical specifications, brochures, and more info about products at https://mikrotik.com/products
The most important technical specifications for this product can be found on the last page of this Quick Guide.
Configuration manual for software in your language with additional information can be found at https://mt.lv/help
If you need help with configuration, please seek a consultant https://mikrotik.com/consultants
Depending on the antenna used, you must set its gain and set the installation setting to ‘Outdoor’. This is to ensure that EIRP meets the limit set by the local authorities. This is done in the Quickset, CPE menu.

First steps:

Open the cover;
Connect Ethernet cable from your computer to the Ethernet port;
Plug the device into the power source;
Download WinBox configuration tool https://mt.lv/winbox;
Default IP: 192.168.88.1, user name: admin and there is no password, or use Neighbors tab and connect through MAC address (or, for some models, check user and wireless passwords on the sticker);
Once connected configure the device, so it has an active Internet connection https://mt.lv/configuration;
Upgrade the RouterOS software to the latest version https://mt.lv/upgrade;
Connect again and in the QuickSet menu choose your country, to apply country regulation settings;
Set the antenna gain, depending on the antenna used;
set the installation setting to ‘Outdoor’;
Set up your wireless network password, the password must be at least eight symbols;
Set up your router password in the bottom field to the right and repeat it, it will be used to log in next time.

Safety Information

Before you work on any MikroTik equipment, be aware of the hazards involved with electrical circuitry, and be familiar with standard practices for preventing accidents. The installer should be familiar with network structures, terms, and concepts.
Use only the power supply and accessories approved by the manufacturer, and which can be found in the original packaging of this product.
This equipment is to be installed by trained and qualified personnel, as per these installation instructions. The installer is responsible for making sure, that the Installation of the equipment is compliant with local and national electrical codes.
Do not attempt to disassemble, repair, or modify the device.
This product is intended to be mounted outdoors on a pole. Please read the mounting instructions carefully before beginning installation. Failure to use the correct hardware and configuration or to follow the correct procedures could result in a hazardous situation for people and damage to the system.
We cannot guarantee that no accidents or damage will occur due to the improper use of the device. Please use this product with care and operate at your own risk!
In the case of device failure, please disconnect it from power. The fastest way to do so is by unplugging the power adapter from the power outlet.
This is a Class A product. In a domestic environment, this product might cause radio interference in which case the user might be required to take adequate measures!

Exposure to Radio Frequency Radiation

This MikroTik equipment complies with the FCC, IC, and European Union radiation exposure limits set forth for an uncontrolled environment. This MikroTik device should be installed and operated no closer than 25 centimeters from your body, occupational user, or the general public.
Manufacturer : Mikrotikls SIA, Brivibas gatve 214i Riga, Latvia, LV1039.
Note : For some models, check the user and wireless passwords on the sticker.

Federal Communication Commission Interference Statement
FCC ID: TV7D2352AC

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a commercial installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note : This unit was tested with shielded cables on the peripheral devices. Shielded cables must be used with the unit to ensure compliance.
Antenna Installation WARNING: It is the installer’s responsibility to ensure that when using the authorized antennas in the USA (or where FCC rules apply); only those antennas certified with the product are to be used. The installer should configure the output power level of antennas, according to country regulations and per antenna type. Professional installation is required for equipment with connectors to ensure compliance with health and safety issues.

LIST OF APPROVED 2.4 GHz ANTENNAS:

3.6 dBi Dipole Antenna (Model: HGO-antenna-OUT)
5 dBi Dipole Antenna HP (Model: DA-2450-05RP-SMA-01 (ACOMNIRPSMA))

LIST OF APPROVED 5 GHz ANTENNAS:

6.68 dBi Dipole Antenna (Model: HGO-antenna-OUT)
19 dBi Sector Antenna (Model: MTAS-5G-19D120)
30 dBi Parabolic Dish Antenna (Model: MTAS-5G-30D3)

The same type of antenna and lower antenna gain than those listed above may also be used in accordance with the certification.
Innovation, Science and Economic Development Canada
IC: 7442A-D2352AC
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
This Class A digital apparatus complies with Canadian ICES-003.
CAN ICES-003 (A) / NMB-003 (A)
The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.
Antenna Installation WARNING: It is the installer’s responsibility to ensure that when using the authorized antennas in Canada (or where IC rules apply); only those antennas certified with the product are to be used. The installer should configure the output power level of antennas, according to country regulations and per antenna type. Professional installation is required for equipment with connectors to ensure compliance with health and safety issues.

LIST OF APPROVED 2.4 GHz ANTENNAS:

3.6 dBi Dipole Antenna (Model: HGO-antenna-OUT)
5 dBi Dipole Antenna HP (Model: DA-2450-05RP-SMA-01(ACOMNIRPSMA))

LIST OF APPROVED 5 GHz ANTENNAS:

6.68 dBi Dipole Antenna (Model: HGO-antenna-OUT)
19 dBi Sector Antenna (Model: MTAS-5G-19D120)
30 dBi Parabolic Dish Antenna (Model: MTAS-5G-30D3)

The same type of antenna and lower antenna gain than those listed above may also be used according to certification

UKCA marking

CE Declaration of Conformity

Hereby, Mikrotīkls SIA declares that the radio equipment type RBD22UGS- 5HPacD2HnD-15S is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://mikrotik.com/products

WLAN

Operating Frequency / Maximum output power 2400-2483.5 MHz / 20

This MikroTik device meets Maximum WLAN and LTE transmit power limits per ETSI regulations. For more detailed information see Declaration of Conformity above.
The WLAN function for this device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range.