MIKroTik Metal 52 ac Outdoor Wireless Cloud Router Switches User Guide

: June 1, 2024
: Mikrotik

Table of Contents

Mikrotik Metal 52 ac Outdoor Wireless Cloud Router Switches
First steps
Safety Information
Federal Communication Commission Interference Statement
Antenna Installation
Technical Specifications
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Mikrotik Metal 52 ac Outdoor Wireless Cloud Router Switches

MIKroTik-Metal-52-ac-Outdoor-Wireless-Cloud-Router-Switches-
product

This device needs to be upgraded to RouterOS v7.9.2 or the latest version to ensure compliance with local authority regulations! It is the end user’s responsibility to follow local country regulations, including operation within legal frequency channels, output power, cabling requirements, and Dynamic Frequency Selection (DFS) requirements. All MikroTik radio devices must be professionally installed This is a Wireless Network Device. You can find the product model name on the care label (ID).

Please visit the user manual page on https://mt.lv/um for the full up-to- date user manual. Or scan the QR code with your mobile phone. The most important technical specifications for this product can be found on the last page of this Quick Guide. Technical specifications, brochures, and more info about products are at https://mikrotik.com/products Configuration manual for software in your language with additional information can be found at https://mt.lv/help MikroTik devices are for professional use.

If you do not have qualifications please seek a consultant at https://mikrotik.com/consultants Depending on the antenna used, you must set its gain and set the installation set to ‘Outdoor’. This is to ensure that EIRP meets the limit set by the local authorities. This is done in the WebFig Quickset menu.

First steps

Connect the device to the included PoE injector with an Ethernet cable;
Connect the PoE injector to the PC;
Connect the power adapter to the PoE injector;
Download the WinBox configuration tool https://mt.lv/winbox;
Open WinBox and connect to the device;
Default IP: 192.168.88.1, user name: admin, no password, or use the Neighbors tab and connect with MAC address;
Download the latest RouterOS software from https://mikrotik.com/download;
Choose MIPSBE packages, and save them to your PC;
Open WinBox and upload downloaded packages, drag and drop into any window;
Restart the device;
Connect again and in the QuickSet menu set your Country, to apply country regulation settings;
Secure your device and set a strong password.

Safety Information

Before you work on any MikroTik equipment, be aware of the hazards involved with electrical circuitry, and be familiar with standard practices for preventing accidents. The installer should be familiar with network structures, terms, and concepts.
Use only the power supply and accessories approved by the manufacturer, which can be found in the original packaging of this product.
This equipment is to be installed by trained and qualified personnel, as per these installation instructions. The installer is responsible for making sure, that the Installation of the equipment is compliant with local and national electrical codes. Do not attempt to disassemble, repair, or modify the device.
This product is intended to be mounted outdoors on a pole. Please read the mounting instructions carefully before beginning installation. Failure to use the correct hardware and configuration or to follow the correct procedures could result in a hazardous situation for people and damage to the system.
We cannot guarantee that no accidents or damage will occur due to the improper use of the device. Please use this product with care and operate at your own risk!
In the case of device failure, please disconnect it from power. The fastest way to do so is by unplugging the power adapter from the power outlet.
Exposure to Radio Frequency Radiation: This MikroTik equipment complies with the European
Union radiation exposure limits are set forth for an uncontrolled environment. This MikroTik device should be installed and operated no closer than 20 centimetres from your body, occupational user, or the general public.
Manufacturer: Mikrotikls SIA, Unijas 2, Riga, Latvia, LV1039.
Note: For some models, check the user and wireless passwords on the sticker.

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This unit was tested with shielded cables on the peripheral devices. Shielded cables must be used with the unit to ensure compliance.

Antenna Installation

WARNING: It is the installer’s responsibility to ensure that when using the authorized antennas in the USA (or where FCC rules apply); only those antennas certified with the product are to be used. The installer should configure the output power level of antennas, according to country regulations and per antenna type. Professional installation is required for equipment with connectors to ensure compliance with health and safety issues.

LIST OF APPROVED 2.4 GHz ANTENNAS

15 dBi Omni Directional (Model: WLO-2450-15)
13 dBi Omni Directional HP (Model: ODH 24-13)
20 dBi Panel (Model: WLP-2450-20)
17 dBi Sector (Model: SA 24-90-17-WB)
24 dBi Dish (Model: DC 24-HD-PFIP)
LIST OF APPROVED 5 GHz ANTENNAS:
8.5 dBi Omni Directional (Model: MT-482016/N/A)
24 dBi Panel Antenna (Model: PA58-24-ANT)
32 dBi Dish Antenna (Model: HDDA5W-32-DP2)

The same type of antenna and lower antenna gain as those listed above may also be used by certification. Exposure to Radio Frequency Radiation: This MikroTik equipment complies with the FCC radiation exposure limits set forth for an uncontrolled environment. This MikroTik device should be installed and operated no closer than 20 centimetres from your body, occupational user, or the general public. Innovation, Science, and Economic Development Canada. This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.

CE Declaration of Conformity
Hereby, Mikrotīkls SIA declares that the radio equipment type RouterBOARD complies with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following internet address: https://mikrotik.com/products

WLAN