OZARKE SKØRTER Modern Table Lamp with Speaker and Wireless Charger Instruction Manual
- June 1, 2024
- OZARKE
Table of Contents
OZARKE SKØRTER Modern Table Lamp with Speaker and Wireless Charger
Product Specifications:
- Power Supply Range: 100-240V, 50Hz
- Indoor Use Only
- Do Not Install Outdoors
- Avoid Scratching Surface and Wires During Installation
- Avoid Exposure to Corrosive Chemicals or Gases
Installation Instructions:
Before You Get Started :
When working with electrical wiring, follow these safety instructions to
prevent injury or damage:
- Turn off the power: Before starting any work, turn off the power to the area you will be working in.
- Use appropriate tools: Only use tools designed for electrical work and in good condition.
- Wear protective gear: Wear safety glasses, gloves, and other protective gear as necessary.
- Test for power: Use a non-contact voltage tester to check for electrical current before touching any wires.
- Avoid wet conditions: Do not work with electrical wiring in wet or damp conditions.
- Keep a safe distance: Stay away from exposed wires or electrical components.
- Seek professional help: Consult a qualified electrician if you are unsure about any aspect of electrical wiring or encounter any problems.
Warnings :
- Do not use the power supply beyond the specified range (100-240V, 50Hz).
- Avoid scratching the surface and wires of the lamp during installation.
- Do not install the lamp outdoors.
- The lamp should not be close to corrosive chemical objects or gases. It should not be washed with water. It can only be wiped with a clean soft cloth.
User Manual:
- Volume Down / Previous Song
- Play / Pause
- Volume Up / Next Song
- Sleep-Inducing Mode
- TWS Indicator Light
- Light Control Area
- Bluetooth Indicator Light
- Digital Clock
Control Panel Instructions:
Gently touch the control panel area to set it to standby mode when the
control icons are illuminated. It will enter sleep mode if there is no
operation within 30 seconds and the control icons are turned off.
Installation:
Plug the adapter into a power socket, and then connect the USB Type-C from
the adapter to the Power port (see Figure 1 – D). If the light turns on, the
device is successfully installed.
Device Pairing :
- After installation, the device will activate Bluetooth searching mode, indicated by the Bluetooth indicator light blinking.
- Turn on Bluetooth on your mobile playback device, and search for LZ-S2020 for pairing. Bluetooth is successfully connected when you hear a notification chime, and the Bluetooth indicator light stays constantly lit.
- To disconnect the current Bluetooth connection and set the device in Bluetooth search mode, press and hold Play/Pause.
- This device has a TWS function for connecting two identical table lamps. You can pair them as follows:
- Ensure that both devices are powered on.
- Press and hold Volume down/Previous song and Volume up/Next song on one of them for one second. You’ll hear a notification chime for pairing, and the TWS indicator light will blink slowly. It’s now in TWS pairing mode and will automatically pair with the other device. You’ll hear a notification chime for successful pairing, and the TWS indicator light will stay constantly lit.
FAQ :
-
Q: Can I install the lamp outdoors?
A: No, the lamp is designed for indoor use only. Do not install it outdoors. -
Q: How do I know if the lamp is successfully installed?
A: If the light turns on after plugging in the adapter and connecting it to the power port, the device is successfully installed.
INSTRUCTION MANUAL
Thank you for shopping with Ozarké, we really appreciate your business. Our
goal is to provide an excellent customer service before, during and after
delivery. We’ve included a guide on how to install this light, should you
require additional assistance please feel free to email us at
info@ozarke.com and one of our customer service reps
will reach out to assist you.
Before you get started:
When working with electrical wiring, follow these safety instructions to
prevent injury or damage:
- Turn off the power: Before starting any work, turn off the power to the area you will be working in.
- Use appropriate tools: Only use tools designed for electrical work and in good condition.
- Wear protective gear: Wear safety glasses, gloves, and other protective gear as necessary.
- Test for power: Use a non-contact voltage tester to check for electrical current before touching any wires.
- Avoid wet conditions: Do not work with electrical wiring in wet or damp conditions.
- Keep a safe distance: Stay away from exposed wires or electrical components.
- Seek professional help: Consult a qualified electrician if you are unsure about any aspect of electrical wiring or encounter any problems.
WARNING!
- Do not use the power supply beyond the specified range (100-240V,50Hz).
- Avoid scratching the surface and wires of the lamp during installation.
- Do not install the lamp outdoors.
- The lamp should not be close to corrosive chemical objects or gases.
It should not be washed with water. It can only be wiped with a clean soft cloth.
Installation Instructions
NOTE: Please read the instructions carefully before use and keep them
properly for future inspection.
Appearance
- A: Top Touch Panel
- B: Charge Indicator Light
- C: Wireless Charging Area
- D: Power Port
- E: Clock
Product Specifications
- Product name : La Série Modern Table Lamp
- Input power : DC 9V/3A
- Output power : 27W
- Light color temperature : 2200K/4500K
- Wireless charger output power : 5W/7.5W/10W
- Speaker power : 5W*2
- Bluetooth version : 5.0
- Bluetooth frequency : 2400MHz – 2483.5MHz
- Bluetooth protocol : AVRCP & A2DP
Packing list:
- 1 La Série Modern Table Lamp
- 1 User Instruction
- 1 Power Adapter
User Manual
- Volume Down / Previous Song
- Play / Pause
- Volume Up / Next Song
- Sleep-Inducing Mode
- TWS Indicator Light
- Light Control Area
- Bluetooth Indicator Light
- Digital Clock
NOTE: Gently touch the control panel area to set it to standby mode when the control icons are illuminated. It will enter sleep mode if there is no operation within 30 seconds and the control icons are turned off.
Installation:
Plug the adapter into a power socket, and then connect the “USB Type-C” from
the adapter to the “Power port” (see Figure 1 – D). If the light turns on, the
device is successfully installed.
Device Pairing:
- After installation, the device will activate Bluetooth searching mode, indicated by the “Bluetooth indicator light” blinking.
- Turn on Bluetooth on your mobile playback device, and search for “LZ-S2020” for pairing. Bluetooth is successfully connected when you hear a notification chime, and the “Bluetooth indicator light” stays constantly lit.
- To disconnect the current Bluetooth connection and set the device in Bluetooth search mode, press and hold “Play/Pause.”
- This device has a “TWS” function for connecting two identical table lamps. You can pair them as follows:
- Ensure that both devices are powered on.
- Press and hold “Volume down/Previous song” and “Volume up/Next song” on one of them for one second. You’ll hear a notification chime for pairing, and the “TWS indicator light” will blink slowly. It’s now in TWS pairing mode and will automatically pair with the other device. You’ll hear a notification chime for successful pairing, and the “TWS indicator light” will stay constantly lit.
- The two paired devices can play synchronously as left and right sound track speakers. The left sound track is played by the TWS connection initiator device (main device) by default. Please use this main device for Bluetooth connection as instructed in the previous step 1 and step 2.
- ATTENTION: Please ensure that your devices are within a 10-meter range.
- To disconnect the current TWS connection, press and hold “Volume down/Previous song” and “Volume up/Next song” on the main device for one second. The device will exit TWS with a notification chime. Now the two devices can be connected to playback devices separately.
Music Play:
- Touch “Volume down/Previous song” to reduce the volume incrementally. Hold “Volume down/Previous song” to play the previous song.
- Touch “Play/Pause” to play a song, and touch it again to pause the current content.
- Touch “Volume up/Next song” to increase the volume incrementally. La Série Modern Table Lamp will provide a notification chime for maximum volume. Hold “Volume up/Next song” to play the next song.
Light Control
- Slide on the “Light control area” to adjust brightness.
- Touch any spot within the “Light control area” to switch between warm light and white light.
- Touch and hold any spot within the “Light control area” to turn the light ON/OFF.
Sleep Mode
Touch “Sleep Inducing Mode” to set the device to sleep mode. In sleep mode,
the light will be adjusted to its minimum and turned off after 30 minutes. If
music is playing, it will be paused after 30 minutes.
You can touch “Sleep Inducing Mode” to exit sleep mode.
Clock Settings
- After installation, the “Digital Clock” displays 00:00 and starts ticking. Time will be synchronized when connected to a mobile device via Bluetooth.
- Time will be automatically corrected after every Bluetooth connection.
- NOTE: Time can only be synchronized when “notification” is allowed during Bluetooth connection.
Wireless Charge
- Place a device qualified for QI Wireless charging standards on the “Wireless charging area” (see Figure 1 – C), aligning it at the center of the area as much as possible.
- The “Charge indicator light” (see Figure 1 – B) will stay constantly lit for successful wireless charging.
- If the “Charge indicator light” is blinking, it means there is a device not suitable for wireless charging; please remove it promptly.
- NOTE: A thick protective shield on the mobile device might obstruct wireless charging. Please remove the shield and then place it on the “Wireless charging area.”
- Please do NOT place metal, magnetic objects, or magstripe cards between the mobile device and recharger. These objects might interrupt charging and even damage the device due to overheating.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>