OZARKE SKØRTER Leger Minimalist Pendant Instruction Manual
- June 2, 2024
- OZARKE
Table of Contents
OZARKE SKØRTER Leger Minimalist Pendant
Thank you
Thank you for shopping with Ozarké, we really appreciate your business. Our goal is to provide an excellent customer service before, during and after delivery. We’ve included a guide on how to install this light, should you require additional assistance please feel free to email us at [email protected] and one of our customer service reps will reach out to assist you.
Before you get started:
When working with electrical wiring, follow these safety instructions to prevent injury or damage:
- Turn off the power: Before starting any work, turn off the power to the area you will be working in.
- Use appropriate tools: Only use tools designed for electrical work and in good condition.
- Wear protective gear: Wear safety glasses, gloves, and other protective gear as necessary.
- Test for power: Use a non-contact voltage tester to check for electrical current before touching any wires.
- Avoid wet conditions: Do not work with electrical wiring in wet or damp conditions.
- Keep a safe distance: Stay away from exposed wires or electrical components.
- Seek professional help: Consult a qualified electrician if you are unsure about any aspect of electrical wiring or encounter any problems.
WARNING!
- Do not use the power supply beyond the specified range (100-240V,50Hz).
- Avoid scratching the surface and wires of the lamp during installation.
- Do not install the lamp outdoors.
- The lamp should not be close to corrosive chemical objects or gases.
It should not be washed with water. It can only be wiped with a clean soft cloth.
Installation Instructions
Components Included:
- 1 x Assembled LED Light with integrated light bar and wiring
- 1 x Wall Bracket (Silver color)
- 4 x Regular Screws (Silver or Black)
- 4 x Plastic Drywall Anchors
Tools Required (not included):
- 1 x Screwdriver
- 1 x Electric Drill
-
Install the wire lock after adjusting to the right height. Cut the wire.
-
Draw the drilling position on the ceiling with the hanging board as the reference.
-
Drill holes in the ceiling with an electric drill.
-
Drive the expansion glue into the ceiling hole.
-
Fix the hanging board on the ceiling with screws.
-
Connect the wires.
-
Screw the top plate lock to the hanging board.
