OZARKE SKØRTER Minimalist Lamp Instruction Manual
- June 2, 2024
- OZARKE
Table of Contents
OZARKE SKØRTER Minimalist Lamp
Product Information
Specifications:
- Power Supply Range: 100-240V, 50Hz
- Indoor Use Only
- Do Not Wash with Water
- Remote Control Battery Type: AAA
Product Usage Instructions
Installation:
- Ensure the power supply is within the specified range (100-240V, 50Hz).
- Handle the lamp carefully to avoid scratching the surface and wires during installation.
- Install the lamp indoors only; do not place it outdoors.
- Keep the lamp away from corrosive chemical objects or gases.
Cleaning:
Do not wash the lamp with water. Use a clean soft cloth to wipe the lamp
for cleaning.
Remote Control Instructions:
- Ensure the remote is connected to the lamp. If not, follow the steps below to sync the remote:
- Press and hold the ‘Connect’ button within 5 seconds after the lamp is powered on until the lamp flashes.
- If the remote needs to be disconnected, press and hold the ‘Connect’ button for 5 seconds within 5 seconds after the lamp is powered on.
- To reconnect, repeat the first step.
FAQ:
-
Q: What should I do if the remote is not responding to the lamp?
A: Follow the remote control instructions provided in the manual to sync or reconnect the remote with the lamp. -
Q: Is it safe to use the lamp close to corrosive objects?
A: No, it is advised to keep the lamp away from corrosive chemical objects or gases as mentioned in the manual.
Thank you for shopping with Ozarké, we really appreciate your business. Our goal is to provide an excellent customer service before, during and after delivery. We’ve included a guide on how to install this light, should you require additional assistance please feel free to email us at info@ozarke.com and one of our customer service reps will reach out to assist you.
WARNING
- Do not use the power supply beyond the specified range (100-240V,50Hz).
- Avoid scratching the surface and wires of the lamp during installation.
- Do not install the lamp outdoors.
- The lamp should not be close to corrosive chemical objects or gases.
It should not be washed with water. It can only be wiped with a clean soft cloth.
Remote Control Instructions
Remote Control Battery Type: AAA batteries
Please note the following:
All remotes should already be connected. However, if the light is not
responding to the remote, please use the following steps to sync the remote
with the light. The lamp doesn’t have an auxiliary light function; you may
ignore this button on the remote control.
- To connect the remote with the lamp within 5 seconds after the lamp is powered on, press and hold the ‘Connect’ button or press the ‘Connect’ button 5 consecutive times until the lamp flashes. This indicates that the remote is now connected to the light.
- To disconnect the remote, within 5 seconds after the lamp is powered on, press and hold the ‘Connect’ button for 5 seconds to disconnect the remote. This step is only needed if the remote is not functioning properly. Repeat step 1 to reconnect again.”
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>