OZARKE 700594904578OZ Moon Top Table Lamp Instruction Manual

OZARKE 700594904578OZ Moon Top Table Lamp

Product Information

Specifications:

• Power Supply Range: 100-240V, 50Hz
• Indoor Use Only
• Do not expose to corrosive chemicals or gases
• Do not wash with water, wipe with a clean soft cloth

Usage Instructions

Installation Instructions

Step 1:

1. Mark the position of the hanging plate hole on top of the cement.
2. Create a hole in the cement ceiling based on the size of the expansion screw.
3. Insert the expansion screw into the ceiling hole with the M6 threads exposed.
4. Secure the hanging plate onto the expansion screw, place the gasket, and fasten it to the ceiling with the nut.

Step 2:

1. Install the light components according to the provided diagram.
2. Connect the wires of each lamp head with the same colour, then connect them with the neutral wire accordingly.
3. Check and ensure that the lamp body is securely locked onto the ceiling.
4. Cut off the power supply before installing or replacing the light source.

Note: This instruction manual is for reference purposes. Please follow the provided diagrams and instructions for accurate installation.

FAQ

• Q: Can this lamp be installed outdoors?
  A: No, this lamp is designed for indoor use only. Avoid installing it outdoors to prevent damage from exposure to outdoor elements.

• Q: How should I clean the lamp?
  A: Do not wash the lamp with water. Use a clean soft cloth to wipe off any dust or dirt gently.

• Q: What should I do if I encounter discrepancies in the parts during unpacking?
  A: If you notice any discrepancies in the partscompared to the provided drawings, please contact customer service immediately for assistance.

Thank you for shopping with Ozarké, we really appreciate your business. Our goal is to provide an excellent customer service before, during and after delivery. We’ve included a guide on how to install this light, should you require additional assistance please feel free to email us at info@ozarke.com and one of our customer service reps will reach out to assist you.

WARNING!

1. Do not use the power supply beyond the specified range (100-240V,50Hz).
2. Avoid scratching the surface and wires of the lamp during installation.
3. Do not install the lamp outdoors.
4. The lamp should not be close to corrosive chemical objects or gases.
   It should not be washed with water. It can only be wiped with a clean soft cloth.

Installation Instructions

NOTE: After opening the packing box, please carefully inspect the parts inside by comparing them to the provided drawings. If there are any discrepancies, please contact customer service promptly.

INSTALLATION STEP 1:

1. Mark the position of the hanging plate hole on top of the cement.
2. Based on the size of the expansion screw, create a hole in the cement ceiling, then insert the expansion screw into the ceiling hole with the M6 threads exposed.
3. Remove the nut, secure the hanging plate onto the expansion screw, place the gasket, and then fasten the hanging plate to the ceiling with the nut. This ensures a strong connection between the hanging plate and the expansion screw to support the weight of the lamp body.

INSTALLATION STEP 2:

1. As shown in the right figure, install the light components first.
2. As shown in the figure on the right, first install the wiring method of each light part. Connect the wires with the same color of each lamp head, and then connect them with the neutral wire respectively.
3. After the lamp body is installed, check whether it is securely locked onto the ceiling.
4. Cut off the power supply when installing or replacing the light source.

Note : This instruction is for reference only. The actual products should be based on the physical objects.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>