XProUSA DB-Z011 40cc Pocket Bike User Guide
- June 2, 2024
- XPROUSA
Table of Contents
XProUSA DB-Z011 40cc Pocket Bike
Product Specifications
- Model: LY40MT-10 VICTOR/DB-Z011
- Engine Oil: SAE10W/40 synthetic oil recommended
Product Usage Instructions
Tips for Initial Setup
- Engine Oil: Check and top up engine oil if necessary with recommended SAE10W/40 synthetic oil.
- Helmet and Protective Gear: Always wear a helmet and protective gear for safety.
- Steering Column and Brake Check: Ensure brakes and steering column are functioning properly before each ride.
- Throttle Check: Verify throttle operation for smooth acceleration and deceleration.
Before Each Ride
- Squeeze the Oil Bubble under the Carburetor: Fill the tank with fresh unleaded gasoline and remove air from the oil inlet pipe.
- Air Filter Choke Lever: Adjust the choke lever for easier starting, especially in cold conditions.
- Pull-Start Check: Gently pull the start cord to initiate the engine start.
- Wheel Check: Ensure wheels have no air leaks, check stem valve and spokes, and confirm tire and condition.
PLEASE REMEMBER TO VIEW THE ASSEMBLY VIDEO BEFORE PROCEEDING
For the Assembly video and Troubleshooting Tips, please visit the below link
or scan the QR code below with your mobile phone.
tinyurl.com/xpro220victor
We want to thank you for choosing us. We are committed to making sure you are
happy with your purchase,so we would love to hear about your experience with
your new product!
Please give us a chance to make it right before you leave negative feedback.
If you are not satisfied with your experience, we will do whatever needs to be
done to make it right. Please visit our website for an assembly guide, product
maintenance, product support, replacement parts, and any other questions or
concerns.
If you are missing a piece or there is shopping damage, need instructions, or
require help with other issues, please reach out to our customer care team by
emailing us at:
support@motopro.freshdesk.com
If you have any questions, please send us a video no less than 30 seconds
showing the problem so that we can forward it to the manufacturer for tech
support. We would also like to offer an additional 1-month warranty after
receiving your video.
You can email us the video at support@motopro.freshdesk.com
Your engagement and support are our greatest motivation to provide the best
customer service possible. We highly appreciate your cooperation. Hope you
have a pleasant shopping experience.
Please register your warranty service by visiting our official website
directly or scan the
QR code below by mobile phone. Thank you and we are always here to help you!
Upon receiving your vehicle (and after reviewing the video) we recommend that you heed the following tips:
USING INSTRUCTION
Engine oil
Check the engine oil level by dipstick marks, and add the recommended oil to
the specified level if necessary. Normally you are supposed to use SAE10W/40
synthetic oil in the engine.
Helmet and protective gear
- Never Ride without a Helmet and Protective Gear.
- Helmets and Protective Gear will effectively reduce the severity of injuries in case of an accident.
Steering column and brake check
Please ensure that the brakes can be applied successfully and there are no
missing brake components. The steering column can turn smoothly and flexibly.
Please check carefully before each ride.
Throttle check
- Make sure the throttle is working well before your ride. Ensure that you can accelerate and decelerate smoothly without any stickiness. If necessary, lubricate the cable and lever housing.
- If the bike is stuck, you can adjust either the throttle holder on the handlebar or the throttle cable connecting to the carburetor.
- You can control the maximum speed through the speed limiter on the handlebar.
Squeeze the oil bubble under the carburetor
Fill the tank with new unleaded gasoline. If gasoline has been left in your
tank for an extended period, replace it with some fresh unleaded gasoline.
Before starting the gasoline engine, squeeze the oil bubble until there is no
air in the oil inlet pipe.
Air filter choke lever
- Choke will help you start the vehicle much easier, especially when the vehicle is cold.
- Please put the choke lever in the DOWN position when you try to start the bike, after it warms up, please put the choke lever UP to run the bike.
Pull-start check
Lightly tug on the pull-start cord to start. Pull a little bit when you
feel resistance and then reset and pull again.
Wheel check
- Make sure there is no air leak on wheels before your ride.
- Double-check if the stem valve is in good condition and to be tightened after pumping air.
- Confirm if any spokes have punctured the tire or any loose.
- No holes on the tires and the rim is in good shape without bent.
For FAQs and more information, please visit: xprousa.com/pages/support
FAQ
Frequently Asked Questions
- Where can I find assembly instructions?
- You can view the assembly video and troubleshooting tips by visiting the link provided or scanning the QR code with your mobile phone: tinyurl.com/xpro220victor
- How can I contact customer support?
- If you have any questions or issues, please send a video of the problem to support@motopro.freshdesk.com. We offer an additional 1-month warranty upon receiving your video.
- How do I register my warranty?
- You can register your warranty service by visiting our official website directly or scanning the QR code provided with your mobile phone.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>