ztxion LX-08, LX-08 Pro Open Style Audio Headphone Instruction Manual
- July 27, 2024
- ztxion
Table of Contents
- ztxion LX-08, LX-08 Pro Open Style Audio Headphone
- Specifications
- Product Information
- Product Usage Instructions
- FAQ
- Product Introduction
- Functional operation
- Headset operation
- Indicator light prompt
- Pairing Connection Instructions
- Warranty Statement
- FCC STATEMENT
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
ztxion LX-08, LX-08 Pro Open Style Audio Headphone
Specifications
- Model: LX-08
- Driver Size: 36mm
- Frequency Response: 20Hz-20kHz
- Battery Capacity: 500mAh
- Impedance: 32Ω
Product Information
The LX-08 Open Style Audi Headphones provide a high-quality audio experience with a driver size of 36mm and a wide frequency response range of 20Hz to 20kHz. The headphones are equipped with a 500mAh battery for long-lasting use and have an impedance of 32Ω for optimized audio performance.
Product Usage Instructions
- Before using the headphones for the first time, ensure they are fully charged by connecting them to a power source using the provided charging cable. Once charged, power on the headphones by pressing the designated power button.
- The headphones feature various functions for easy operation. Use the PP button for power on/off. Short press for play/pause, long press for volume control. Use the buttons on the headphones to switch tracks, adjust the volume, and answer calls.
- The headphones offer different operating modes for music playback and phone calls. Switch between music mode and telephone mode as needed for a versatile listening experience.
- Control music playback using the buttons on the headphones. Use the touch controls on the left earpiece for volume adjustment, track selection, and music switching.
- When in telephone mode, use the headphones to answer calls, end calls, and control call volume. The left earbud features specific functions for call management.
FAQ
- Q: How do I charge the headphones?
- A: To charge the headphones, connect them to a power source using the provided charging cable. Ensure they are fully charged before first use.
- Q: How do I switch between music mode and telephone mode?
- A: To switch between music mode and telephone mode, use the designated buttons or controls on the headphones to toggle between the two modes based on your preference.
Product Introduction
Product Introduction
First use
- Before using it for the first time, please confirm that the battery of both earphones and charging case is full. When the battery Is low, please use it
- This product comes with a data cable for charging and is certified by a reputable manufacturer and certified by the National CCC
- Charging device. If the product has not been used for more than 2 weeks, it is recommended to charge the product before use.
Functional operation
Audio operation
PP button
- Short press play/pause
- Long press to tum on/off
Previous track/volume-
- Short press the previous song Long press volume-
Next Song/Volume +
- Short press a song, long press the volume
Headset operation
On/Off mode
- Left ear three touch: volume decreases
- Three Touch Right Ear: Volume Increase
Music switching
- Left Ear Double Touch: Play the previous song
- Right Ear Double Touch: Play Next Song
- One touch: play/pause
modulation
- Left ear three touch: volume decreases
- Three Touch Right Ear: Volume Increase
Telephone mode
- Reject Incoming call: Long press for 2 seconds
- Incoming call: Click to answer
- Click Hang Up again
Indicator light prompt
Audio indicator light
Headphone indicator light
Atmosphere light indicator light
Pairing Connection Instructions
Sound pairing
- Bluetooth pairing: When the headphones are turned on and enter pairing mode, the Biuetooth device searches for the headphone pairing name “LX-08”
- Click to connect and complete pairing. (If Bluetooth cannot be found, please turn off and then turn on your phone’s Bluetooth to reconnect)
- Connection successful: There will be a voice prompt sound.
- Automatic reconnection: After the first successful connection, the last paired device will be connected by default upon startup.
Earphone pairing
- Bluetooth pairing: When the earphones are turned on, they enter pairing mode. The Bluetooth device searches for the earphone pairing name “L-08 Pro” and clicks “connect pair og complete”. If Bluetooth cannot be found, please turn off and then turn on the
- phone’s Bluetooth to reconnect successfully. There will be a voice prompt sound.
- Automatic reconnection: After the first successful connection, the last paired device will be connected by default upon startup.
Matters needing attention
Prompt
- Before using the product, please read this user manual carefully and keep it properly
- For first use, please fully charge this product first
- If the product is not used for a long time (more than 1 month), please charge It,
- If the phone is unable to search for Bluetooth earphones, please confirm whether the Bluetooth earphones are in pairing status. If pairing or connection is not made for a long time, the Bluetooth earphone pairing function will be turned off. Please turn on the Bluetooth earphones again to pair the status. If not, please restart the phone; If there Is an error In the Bluetooth headphone program, please restart the Bluetooth headphone program.
Warning
-
Do not remove repair or modify headphones for any reason, as it may cause fire or electronic components
Breakthrough or even complete damage to this product -
Do not place the device in an environment where the temperature is too low or too high (below 0 °C or above 45 °C)
-
Please avoid using near the eyes of children or animals. Device indicator lights
-
Do not use this device In thunderstorm weather, as thunderstorms can cause the device to malfunction,
-
And increase the risk of electric shock. 5. Do not wipe this product with oil or other volatile liquids
-
Do not wet the device when it comes into contact with liquid
Warranty Statement
Prompt
Dear customer, hello! Thank you for your patronage of our company’s products.
To ensure your interests,
Please carefully read the instruction manual and the following content after
purchasing this product:
The following situations are not covered by the warranty, and our company can
provide paid services. Please note)
-
Fallure to operate, use, and store according to the user manual resulted in malfunction and damage to this product.
-
Unauthorized graffiti, tearing off product packaging and barcodes.
-
Unauthorized modification of factory settings and disassembly for repair.
-
Unexpected factors or human-caused product damage, such as input of unqualified voltage, high temperature, water ingress
Damage, severe oxidation or rusting of the product, etc. -
Malfunctions and damages caused by uncontrollable factors such as earthquakes, fires, floods, lightning strikes, etc.
FCC STATEMENT
This device should be installed and operated with a minimum distance of 0cm
between the radiator and your body.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, according to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used under the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>