ENPKLUTE Picture Ledge Shelf with Protective Guards Set Instruction Manual
- June 2, 2024
- ENPKLUTE
Table of Contents
ENPKLUTE Picture Ledge Shelf with Protective Guards Set
Specifications
| Component | Quantity |
|---|---|
| Shelf | 1 |
| Long Screws | 4 |
| Wall Plugs | 4 |
| Level | 1 |
Installation Steps
- Measure the distance with a ruler. An illustration shows a shelf being measured by a ruler to determine the appropriate distance for installation.
- Mark the location where you want to install the shelf. A diagram depicts a pencil marking the wall where the shelf will be installed, using the ruler for precision.
- Drill the holes A detailed image demonstrates the use of a power drill to create holes in the wall at the marked locations.
- Punch the expansion nails The illustration shows a hammer inserting wall plugs (expansion nails) into the drilled holes.
- Lock the screws An image provides a close-up view of a screw being secured into a wall plug within the wall.
- Hang the shelf A final graphic illustrates the shelf being mounted onto the secured screws protruding from the wall.
FAQ
What tools are needed for assembly?
A ruler, a pencil, a power drill, a hammer, and a level are needed for the assembly process.
How many screws and wall plugs are provided?
There are four screws and four wall plugs provided for the installation.
What is the first step in the installation process?
The first step is to measure the distance with a ruler to determine where the shelf will be installed.
What should I use to mark the drill locations on the wall?
You should use a pencil to mark the locations on the wall where the shelf will be installed.
Is it necessary to use a level during installation?
Yes, using a level ensures that the shelf is installed straight and even.
ASSEMBLY INSTRUCTION
Installation Steps
- Measure the distance with a ruler.
- Mark the location where you want to install the shelf.
- Drill the holes
- Punch the expansion nails
- Lock the screw:
- Hang the shelf