ENPKLUTE Rattan Wall Shelf Picture Ledge Shelf Instruction Manual

May 15, 2024
ENPKLUTE

ENPKLUTE-logo

ENPKLUTE Rattan Wall Shelf Picture Ledge Shelf

Specifications

Step Tool Required Hardware Used
1 Ruler, Level
2 Drill Expansion Nails (A)
3 Screwdriver Screws (B)

Hardware Parts

ENPKLUTE-Rattan-Wall-Shelf-Picture-Ledge-Shelf-fig-1

Floating Shelves Assembly Steps

  1. Illustration of the shelf with its front facing upwards, indicating the placement of hardware parts A, B, C, D, and E.
  2. Diagram showing the attachment of parts C and E to the bottom of the shelf, with four instances of C and two instances of E.ENPKLUTE-Rattan-Wall-Shelf-Picture-Ledge-Shelf-fig-2

Floating Shelves Installation Steps

  1. Measure the distance with a ruler.  Diagram showing a ruler extended across the width of the shelf, indicating measurement for installation.
  2. Mark the place where you want to install the shelf and check with a level.  Illustration showing the use of a level to ensure the shelf will be installed evenly on the wall.
  3. Drill the holes.  Close-up showing a drill making a hole in a wall, with part D (expansion nail) next to the drilled hole.
  4. Punch the expansion nails.  Detailed view of a hammer driving part A (expansion nail) into the wall.
  5. Screw in the screws.  Diagram depicting part B (screw) being screwed into the expansion nail (part A) within the wall.
  6. Hang the shelf.  Final illustration showing the shelf being mounted onto the screws that are fixed into the wall, with part B (screws) sliding into slots on the shelf.ENPKLUTE-Rattan-Wall-Shelf-Picture-Ledge-Shelf-fig-3

FAQ

What tools are required for assembly? A ruler, level, drill, and hammer are required to complete the installation of the floating shelves. How many expansion nails and screws are needed? According to the diagram, you will need four expansion nails (part A) and two screws (part B). Do I need to use a level when installing the shelf? Yes, a level is used to ensure the shelf is installed evenly. Is it necessary to drill holes into the wall for installation? Yes, the instructions indicate that holes must be drilled into the wall to accommodate the expansion nails..

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals