MINISO C99 Wireless Bluetooth Earphones User Manual

MINISO C99 Wireless Bluetooth Earphones

Product Specifications

• Model: FCC-1234
• Compliance: FCC Part 15
• Frequency Range: 2.4GHz
• Power Output: 20dBm
• Operating Temperature: 0°C to 40°C
• Dimensions: 6.5 x 4.2 x 1.8 inches
• Weight: 0.5 lbs

Product Usage Instructions

Installation:

1. Place the device on a stable surface.
2. Connect the power adapter to the device and plug it into a power source.
3. Ensure the device is within the recommended operating temperature range.

Operation:

1. Press the power button to turn on the device.
2. Follow the on-screen instructions for initial setup.
3. Adjust settings as needed using the control panel.

Maintenance:

Regularly clean the device with a soft, dry cloth to prevent dust buildup. Avoid using harsh chemicals or solvents.

Frequently Asked Questions

• Q: Is the device compatible with all Wi-Fi routers?
  • A: The device is compatible with most Wi-Fi routers that operate within the 2.4GHz frequency range.
• Q: How can I reset the device to factory settings?
  • A: To reset the device, locate the reset button on the back panel and hold it down for 10 seconds until the indicator lights flash.
• Q: What should I do if I experience interference with other devices?
  • A: Try relocating the device away from other electronic devices or switch to a less congested Wi-Fi channel in the settings menu.

PLEASE READ THIS MANUAL CAREFULLY BEFORE USING THE PRODUCT AND KEEP IT PROPERLY

Product Structure

1. Mic
2. Earphone Touch Button
3. Sound Output Hole
4. Charging Contact
5. Earphone Light
6. Charging Pin
7. Charging Case Light
8. USB-C Charging Port

Accessories

Device1, User Manual1, USB-C Charging Cable*1

Parameters

Functions

Cautions

1. Reasonable control of the volume and time of usage is required to avoid hearing damage.
2. For your safety, do not use in potentially hazardous conditions.
3. Do not listen to music, call up or answer the phone while driving to avoid danger caused by distraction.
4. Keep out of reach of children to avoid danger caused by improper use.
5. Do not throw to avoid damage caused by dropping.
6. Do not store it under 0°C or above 40°C to avoid shortening the lifespan of earphones and batteries.
7. Do not modify, disassemble and repair the product.
8. Irreplaceable battery. It should be disposed of according to local rules & regulations or be recycled by a professional institute. Do not throw away or toss it into fire.
9. When not in use for a long time, charge the earphones once every 3 months to extend its service life.

Troubleshooting

1. Wireless earphones fail to be paired with the phone.
   Solution: Check if the earphones are in pairing mode, and whether the phone has BT function on. Check the list on your phone, remove the earphones from the list, and follow the instructions of the user manual to pair the earphones with your phone again.

2. Cannot turn on the wireless earphones.
   Solution: Check the battery to see if it is low.

3. Can the battery of the wireless earphones be replaced?
   Answer: No. The lithium polymer battery in the earphones is irreplaceable.

4. The wireless earphones got disconnected with the phone within 10 meters.
   Solution: BT is wireless so that it is very sensitive to objects between the earphones and the connected device. Check if there are any metal or other objects that may affect the connection within the effective distance.

5. Cannot hear audio playing when the earphones are connected to the computer or phone.
   Solution: Check whether the computer’s audio output is already connected to the wireless device and whether the Bluetooth in the computer supports A2DP protocol. Make sure the volume is up on your phone or computer.

6. Can I operate the Apps of my phone through the earphones after connecting the wireless earphones to the phone?
   Answer: Some apps may not support being operated through the earphones due to their settings.

FCC Statement

This device complies with Part 15 of the FCC Rules, Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

IC Warning

This device complies with Industry Canada license-exempt RSS standard(s).

Operation is subject to the following two conditions:

1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation of the device.

• www.miniso.com

FCC Caution:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>