EUROPLAST EA100 Circular Exhaust Fan Instruction Manual
- June 2, 2024
- EUROPLAST
Table of Contents
EUROPLAST EA100 Circular Exhaust Fan
Product Information
Product Overview
The document provides an overview of a ventilation product from EUROPLAST,
specifically from the eextra series EA. The website for more information is
listed as www.europlast.lv.
Installation and Maintenance Instructions
Instructions and warnings are provided for the installation and maintenance
of the ventilation unit. It is noted that prior to installation or use,
reading the instructions is imperative. Users are warned to ensure the
ventilator has no visible damage after unpacking, to check that the electrical
network voltage (V) and frequency (Hz) match the nominal indices inscribed on
a plate inside the ventilator, and to remove the power supply from the
electrical network to which the ventilator will be connected. Qualified
electricians are recommended for the installation process. The document also
mentions that the product comes with a two-year warranty and specifies
conditions under which the warranty does not apply.
Specifications:
- Model: eextra
- Series: EA
- Power Supply: 220-240V~
- Motor Power: EA100 – 15W, EA150 – 20W
- Speed: EA100 – 2550rpm, EA150 – 2100rpm
- Current: EA100 – 0.37A, EA150 – 0.52A
Model | EA100 | EA125 | EA150 |
---|---|---|---|
Voltage (V) | 220 – 240 | ||
Frequency (Hz) | 50 | ||
Power (W) | 15 | 16 | 20 |
Productivity (m³/h) | 100 | 150 | 200 |
Noise Level at 3m, Lp A dB(A) | 32 | 36 | 40 |
Environmental Impact Protection | IPX4 | ||
RPM | 2550 | 2360 | 2100 |
Ambient Temperature | +5°C … +40°C | ||
Weight (kg) | 0.37 | 0.42 | 0.52 |
- The ventilator is also equipped with two ball bearings in the electric motor.
Product Usage Instructions
Installation and Maintenance:
Attention! Before installing the fan, disconnect the power supply from
the electrical network to which the fan will be connected.
Warning! If the fan is directly connected to the electrical network, it
must be equipped with a switch that ensures a safe interruption of the power
supply wires.
Timer T:
Attention! If the timer potentiometer is set to 1 minute, connecting the fan to the electrical network will turn it on for a few seconds.
Warranty:
The warranty does not cover damages due to:
- Mechanical or other damages to the product.
- Mechanical defects caused by misuse or abuse by the product owner.
- Defects due to incorrect installation or connection.
- Defects resulting from non-compliance with the manual instructions.
Dimensions
Dimension | EA100 | EA125 | EA150 |
---|---|---|---|
A (mm) | 148 | 173 | 198 |
B (mm) | 80 | 80 | 80 |
C (mm) | 16 | 16 | 16 |
D (mm) | 99 | 124 | 149 |
Installation Diagrams
Several diagrams (Zm. 1a to Zm. 7) illustrate the installation process for the ventilation unit, including electrical connections and settings for the humidity sensor and timer.
Frequently Asked Questions (FAQ)
What should I do before using and installing the fan?
Before using and installing the fan, carefully read the user instructions provided.
What should I check during unpacking of the fan?
Make sure that the fan does not have any visual damages during unpacking.
How can I ensure the electrical network voltage and frequency are correct for installation?
Check that the electrical network voltage (V) and frequency (Hz) match the nominal values engraved on a plate inside the fan before installation.
What should be done before installing the ventilator?
It is important to read the instructions carefully and check the ventilator for any visible damage after unpacking.
Who should install the ventilator?
Installation should be done by a qualified electrician.
What are the voltage and frequency requirements?
The electrical network voltage should be 220-240V with a frequency of 50Hz.
What is the warranty period for the ventilator?
The product comes with a two-year warranty, subject to specific conditions.