Beurer HD75DG Heated Throw Blanket User Manual

May 15, 2024
Beurer

Beurer HD75DG Heated Throw Blanket

Beurer-HD75DG-Heated-Throw-Blanket-PRO

Product Information

Specifications

  • Product Model: HD 75 Cosy Dark Grey
  • Distributed by: Reduction Revolution Pty Ltd
  • Website: www.reductionrevolution.com.au/collections/heated-throws
  • Compliance: European and national directives, Oeko Tex Standard100
  • Safety Features: Double protective insulation, Protection class 2
  • Not suitable for children under 3 years old
  • Usage: Designed to warm up the human body

Product Usage Instructions

Important Safety Instructions
Read and observe all warnings and safety notes provided in the manual.

Initial Setup

  1. Ensure the device packaging is intact and all contents are present.
  2. Inspect the device for any visible damage before use.
  3. Remove all packaging materials before using the product.
  4. If in doubt about the device’s condition, contact the retailer or Customer Services.

Switching On

  1. Plug in the mains cable to a power source.
  2. Use the sliding switch on the control to turn on the device and set the desired temperature.
  3. Wait for the indicator lamp to show that the device is powered on.

Frequently Asked Questions (FAQ)

Q: What should I do if the device is damaged?

A: Do not use the device if there is visible damage. Contact your retailer or Customer Services for assistance.

Q: Can this product be used by children?

A: This heated overblanket is not suitable for very young children (0 – 3 years). It is designed to warm up the human body.

Q: Can I wash this product in a washing machine?

A: Do not dry-clean, iron, bleach, or dry this product in a tumble dryer. Follow the care instructions provided in the manual for cleaning.

Read these instructions for use carefully. Observe the warnings and safety notes. Keep these instructions for use for future reference. Make the instructions for use accessible to other users. If the device is passed on, provide the instructions for use to the next user as well.

Explanation of symbols

The following symbols are used on the device, in these instructions for use, on the packaging and on the type plate for the device:Beurer-HD75DG-Heated-
Throw-Blanket- \(1\) Beurer-HD75DG-Heated-Throw-Blanket-
\(2\)

Items included in the package

Check that the device packaging has not been tampered with and make sure that all contents are present. Before use, ensure that there is no visible damage to the device or accessories and that all packaging material has been removed. If you have any doubts, do not use the device and contact your retailer or the specified Customer Services address.

  • 1 Heated overblanket
  • 1 Control
  • 1 Instructions for use

Description

Beurer-HD75DG-Heated-Throw-Blanket- \(3\)

  1. Mains plug
  2. Mains cable
  3. Control
  4. Indicator lamp
  5. Sliding switch for ON/OFF and temperature settings
  6. Plug-in coupling

Important instructions

Retain for future use

WARNING

  • Non-observance of the following instructions may result in personal injury or material damage (electric shock, skin burns, fire). The following safety and hazard information is not only intended to protect your health and the health of others, it should also protect the product. For this reason, pay attention to these safety notes and include these instructions when handing over the product to others.
  • This heated overblanket must not be used by persons who are not sensitive to heat or by other vulnerable persons who may not be able to react to overheating (e.g. diabetics, people with skin alterations due to illness or scarred tissue in the application area, after taking pain relief medication or alcohol).
  • This heated overblanket must not be used by very young children (0-3 years old) as they are unable to respond to overheating.
  • The heated overblanket can be used by children older than 3 and younger than 8 years of age provided they are supervised. For this, the control must always be set to the minimum temperature.
  • This heated overblanket may be used by children over the age of 8 and by people with reduced physical, sensory or mental skills or a lack of experience or knowledge, provided that they are supervised or have been instructed on how to use the heated overblanket safely, and are fully aware of the consequent risks of use.
  • Children must not play with the heated overblanket.
  • Cleaning and user maintenance must not be performed by children unless supervised.
  • This heated overblanket is not designed for use in hospitals.
  • This heated overblanket is only intended for domestic/private use, not for commercial use.
  • Do not insert pins.
  • Do not use folded or rucked.
  • Do not use if wet.
  • This heated overblanket may only be used in conjunction with the control specified on the label.
  • The heated overblanket must only be connected to the mains voltage that is specified on the label.
  • The electrical and magnetic fields emitted by this heated overblanket may interfere with the function of a pacemaker. However, they are still well within the limits: electrical field strength: max. 5000 V/m, magnetic field strength: max. 80 A/m, magnetic flux density: max. 0.1 millitesla. Please consult your doctor and the manufacturer of your pacemaker before using this heated overblanket.
  • Do not pull, twist or make sharp bends in the cables.
  • If the cable and control are not positioned properly, there may be a risk of becoming entangled in, being strangled by, tripping over, or stepping on the cable and control of this heated overblanket. The user must ensure that excess lengths of cable, and cables in general, are safely routed.
  • Please check this heated overblanket frequently for signs of wear and tear or damage. If any such signs are evident, if the heated overblanket has been used incorrectly or if it no longer heats up, it must be checked by the manufacturer before being switched on again.
  • Under no circumstances should you open or repair the heated overblanket (including the accessories) yourself because faultless functionality can no longer be guaranteed thereafter. Failure to observe this will invalidate the guarantee.
  • If the mains connection cable of this heated overblanket is damaged, it must be disposed of. If it cannot be removed, the heated overblanket must be disposed of.
  • Do not expose control and cables to direct sunlight.
  • When this heated overblanket is switched on:
    • Do not place any sharp objects on it.
    • Do not place any heat sources, such as hot water bottles, heat pads or similar, on it.
  • The electronic components in the control warm up when the heated overblanket is in use. For this reason, the control must never be covered or placed on the heated overblanket when it is in use.
  • It is essential to observe the information relating to the following chapters: Operation, Cleaning and maintenance, Storage.
  • If you should have any questions about using our devices, please contact Customer Services.

Intended use

CAUTION
This heated overblanket is only designed to warm up the human body.

Operation

Safety
CAUTION

  • The heated overblanket is fitted with the SAFETY SYSTEM. This electronic sensor technology provides protection against overheating across the entire surface of the heated overblanket with an automatic switch-off if there is a fault.
  • Please note that, for safety reasons, the heated overblanket can no longer be operated after a fault has occurred and must be sent to the specified service address.
  • Do not connect the defective heated overblanket with another control of the same type. This would trigger a permanent switch-off via the control safety system.

Initial use

  • First, connect the control to the heated overblanket by inserting the plug-in coupling.
  • Then plug the mains plug into the socket.

Switching on
To switch the heated overblanket on, set the sliding switch for ON/OFF and temperature settings to setting 1, 2, 3, 4, 5 or 6. When it is switched on, the indicator lamp (4) lights up.

Setting the temperature

  • Level 0: OFF
  • Level 1: minimum heat
  • Setting 2 – 5: individual heat setting
  • Level 6: maximum heat

NOTE The fastest way to warm up the heated overblanket is to initially set the highest temperature setting.
WARNING If the heated overblanket is being used over several hours, we recommend that you set the lowest temperature setting on the control to avoid the body overheating and thereby any potential burns to the skin or heat stroke.

Automatic switch-off
This heated overblanket switches off automatically after 3 hours. Once the heated overblanket has switched off, it is no longer heated and the indicator lamp flashes. To switch on the heated overblanket again, first set the sliding switch for ON/OFF and temperature settings to the OFF ( 0 ) position for 5 seconds. After about 5 seconds it is possible to switch it on again.

Switching off
To switch off the heated overblanket, slide the sliding switch for ON/OFF and temperature settings to the OFF ( 0 ) position.

NOTE If the heated overblanket is not being used for several days, slide the sliding switch for ON/OFF and temperature settings to the OFF ( 0 ) position and remove the mains plug from the socket. Then disconnect the control from the heated overblanket by unplugging the plug-in coupling.

Cleaning and maintenance

WARNING Before cleaning, always remove the mains plug from the socket first. Then disconnect the control from the heated overblanket by unplugging the plug-in coupling. Otherwise there is a risk of electric shock.
CAUTION The control must never come into contact with water or other liquids, as this may cause damage.

  • To clean the control, use a dry, lint-free cloth. Do not use any chemical or abrasive cleaning agents.
  • Small marks on the heated overblanket can be removed with a damp cloth or sponge and, if necessary, with a little liquid detergent for delicate laundry.

CAUTION Please note that the heated overblanket may not be chemically cleaned, wrung out, tumble dried, put through a mangle or ironed.

  • This heated overblanket is machine-washable.
  • Set the washing machine to a particularly gentle wash cycle at 30 °C (wool cycle). Use a delicate laundry detergent and measure it out according to the manufacturer’s instructions.

CAUTION Please note that frequent washing of the heated overblanket has a negative effect on the product. The heated overblanket should therefore be washed in a washing machine a maximum of 5 times during its life.

  • Immediately after washing, reshape the heated overblanket to its original dimensions while it is still wet and spread it out flat over a clotheshorse to dry.

CAUTION

  • Do not use pegs or similar items to attach the heated overblanket to the clotheshorse. Failure to do so may damage the heated overblanket.
  • Do not reconnect the control to the heated overblanket until the plug-in connector and electric overblanket are completely dry. Failure to do so may damage the heated overblanket.

WARNING Never switch the heated overblanket on to dry it! Otherwise there is a risk of electric shock.

Storage

If you do not plan to use the heated overblanket for a long period of time, we recommend that you store it in the original packaging. For this purpose, disconnect the control from the heated overblanket by unplugging the plug-in coupling.

CAUTION

  • Allow the heated overblanket to cool down before folding. Otherwise the heated overblanket may be damaged.
  • Do not crease the heated overblanket by placing items on top of it during storage.

Disposal
For environmental reasons, do not dispose of the device in the household waste at the end of its useful life. Dispose of the unit at a suitable local collection or recycling point. Dispose of the device in accordance with EC Directive – WEEE (Waste Electrical and Electronic Equipment). If you have any questions, please contact the local authorities responsible for waste disposal.

What if there are problems?

Problem Cause Solution

The indicator lamp is not illuminated while

– the control is properly connected to the heated overblanket.
– the mains plug is connected to a working socket.
– the sliding switch for ON/OFF and temperature settings is set to 1, 2, 3, 4, 5 or 6.

| The safety system has switched the heated overblanket off permanently.| Send the heated overblanket and the control for servicing.

See the type plate label on the heated overblanket.

Guarantee/service
Further information on the guarantee and guarantee conditions can be found in the guarantee leaflet supplied.

Distributed by:
Reduction Revolution Pty Ltd
www.reductionrevolution.com.au/collections/heated- throws

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals