hegen PCTO Breast Pump Kit User Manual

hegen PCTO Breast Pump Kit

Specifications:

• Material: Polypropylene (PP), Silicone, Polyphenylsulfone (PPSU)
• Heat Resistance: Suitable for lactating women to express and store milk

Product Information

The Hegen Manual Breast Pump Kit features Soft SoundTM components that are Phthalate-Free and PVC-Free. The kit includes a Manual Handle, Manual Diaphragm, Stem Flange, Lid Seal, Container, Pump Body, Seal, and Valve made of high-quality materials for safe and efficient use.

Product Usage Instructions

1. Inspect Before Use: Check all items for damage or weakness before each use. Discard at the first sign of damage.
2. Cleaning and Maintenance: Wash hands before handling. Avoid freezing components as they may become brittle. Handle with care to prevent damage.
3. Assembly Steps:
   • Insert the Flange into the Pump Body fully.
   • Fit the Stem into the Manual Diaphragm.
   • Place the Manual Diaphragm into the Pump Body and press down firmly to seal.
   • Engage the Stem with the Manual Handle and pin the Pivot into the Pump Body until a click is felt.
   • Insert the Valve into the Pump Body ensuring a proper fit.
   • Assemble the Pump Body with the Seal facing outwards.
   • Attach the Breast Milk Storage Container by pressing to close and twisting to open.

FAQ:

1. Q: When is it best to express breast milk?
   A: It is recommended to wait until your breastfeeding schedule and milk supply are established (usually 2-4 weeks) before expressing breast milk, unless advised otherwise by a healthcare professional.

2. Q: How often should components be replaced?
   A: For safety and hygiene reasons, it is recommended to replace components every 6 months.

Hegen Manual Breast Pump Kit (SoftSqroundTM)

Instructions for Use

Phthalate-Free and PVC-Free

• Inspect all items before each use. Throw away at the first sign of damage or weakness. The bottle and accompanying parts may blur after repeat use, wash, warming and sterilising. For safety and hygiene reasons, we recommend replacing components every 6 months.
• For more information on our products, please visit www.hegen.com

For your child’s safety and health
WARNING!

• Do not use while you are pregnant, as pumping can induce labour.
• Do not drive while pumping.
• Before first use, clean and sterilise all components thoroughly. Place the components in boiling water for 5 minutes. This is to ensure hygiene.
• This is NOT a toy. Keep all components not in use out of reach of children.
• Do not continue pumping for more than 5 minutes if you do not succeed in expressing any milk.
• If the pressure generated is uncomfortable or cause pain, break the seal between the breast and the Flange (SoftSqround™) with your finger and remove the pump from your breast.
• Do not use the product if it does not work properly.
• Do not expose the product to extreme heat and do not place it in direct sunlight.
• Do not place components directly on surfaces that have been cleaned with anti-bacterial cleaners.

Important :

• Plastic components and containers become brittle when frozen and may break when dropped.
• Pump components and containers may become damaged if mishandled, e.g. dropped, knocked over, scratched.
• Take appropriate care in handling all components of the product.

Intended Use

For lactating women to express and store milk from their breasts to complement breastfeeding.

• Product Description
  Hegen Manual Breast Pump is a personal use breast pump that supports and complement breastfeeding

• When To Express Milk
  It is best to wait until your breastfeeding schedule and milk supply is established (usually at least 2 – 4 weeks) before expressing breast milk, unless otherwise advised by your healthcare professional.

Prepare To Use

• Always wash your hands with soap before cleaning, sterilising and using the product.
• Plastic components and containers become brittle when frozen and may break when dropped.
• Pump components and containers may become damaged if mishandled, e.g. dropped, knocked over, scratched.
• Take appropriate care in handling all components of the product.
• Do not use the breast milk if pump components or containers become damaged.

Cleaning

Before first use, disassemble all components of the product, wash with bottle detergent and rinse in clean water thoroughly before sterilising. This is to ensure hygiene. Always take all components apart  and wash the product with bottle detergent immediately after each use. Take extra care when removing and cleaning the Valve not to lose or damage it. Gently pull to remove the Valve and rub clean  with fingers in warm water with mild bottle detergent. Do not use a teat brush or any other implement to clean it. When using a dishwasher (top rack only), avoid high-heat settings like “sanitary clean”  or “heat boost” which may distort components.

Sterilizing

• Sterilise all components except the Manual Handle (SoftSqroundTM) in a UV steriliser, steam steriliser or boiling water. Should you choose to sterilise using a UV steriliser or an electric steam
• steriliser, the sterilising instructions of the sterilisation devices should be carefully observed. In addition, all components should be removed from the UV steriliser after sterilisation to prevent excessive exposure to UV light.
• For boiling : Bring the water to boil, submerge components in boiling water for no more than 5 minutes. For sterilisation, all components should be completely taken apart to avoid different reaction of materials which can cause deformation. All grease or oil residue should be thoroughly removed before sterilising to avoid permanent staining of parts.
• Do not use the breast milk if pump components or containers become damaged.
• Step 1:
  • Insert the Flange (SoftSqroundTM) into the Pump Body (SoftSqroundTM) fully and ensure that it is fitted snugly.
• Step 2:
  • Ensure the Stem is properly fitted into the hole on the Manual Diaphragm (SoftSqroundTM).
• Step 3:
  • Place the Manual Diaphragm (SoftSqroundTM) into the Pump Body (SoftSqroundTM) and press down firmly around the entire rim to ensure that it is sealed properly.
• Step 4 :
  • Engage the Stem with the Manual Handle (SoftSqroundTM) and then pin the Pivot into the opening on side of  Pump Body (SoftSqroundTM) until a click is felt.
• Step 5:
  • Hold onto the flat surface of the Valve to prevent Valve slit from misalignment and insert Valve into Pump Body (SoftSqroundTM) from underneath. Push in the Valve as far as possible.
• Step 6:
  • Ensure Pump Body (SoftSqroundTM) is assembled with removable Seal (Hegen logo facing outwards).
• Step 7:
  • Hold the assembled Manual Breast Pump Module and Press-to-Close onto the Breast Milk Storage Container. To tighten, turn in clockwise direction. Twist-to-Open in anti-clockwise direction.

Pumping
Caution! Always wash your hands with soap before touching the breast and pump components. Contact your healthcare professional or breastfeeding specialist if you can express only minimal or no milk or if expression is painful. Do not continue pumping for more than 5 minutes if you do not succeed in expressing any milk. If the pressure generated is uncomfortable or cause pain, break the seal between the breast and the Flange (SoftSqroundTM) with your finger and remove the pump from your breast.

Find our nipple measurement guide here

TIP: A good nipple fit of the Flange (SoftSqroundTM) will provide a more comfortable and effective pumping experience. Use the nipple measurement guide below to find the most suitable flange size.

other sizes sold separately

• Step 1:

  • Centre the assembled Manual Breast Pump Module over nipple and hold it firmly on your breast for a proper seal. Caution : Pressing Flange (SoftSqroundTM) too firmly into breast may upset milk flow.

• Step 2:

  • Begin pumping by gently pressing down the Manual Handle (SoftSqroundTM) until suction is felt on your breast. Then allow the handle to resume to resting position.
    Note : The level of vacuum is controlled by the pressure and the speed of the Manual Handle (SoftSqroundTM) movement. You decide the pumping comfort that is best for you.

• Step 3:

  • Repeat Step 2 quickly to simulate the “let-down” reflex and stimulate milk flow.

• Step 4:

  • Once milk flow begins, apply a slower rhythm and longer stroke by pressing down the Manual Handle (SoftSqroundTM) and keeping it pressed down for up to 3 seconds before release. This will help to maximise milk flow.

• Step 5:

  • When you finish pumping, gently remove the Manual Breast Pump Module from your breast.

Note: Always ensure expressed breast milk is not touching tip of Valve during pumping. Exceeding maximum level may cause leakage and affect pump performance. If you regularly express more than 150ml of breast milk per session, use Hegen PCTOTM 240ml/8oz Breast Milk Storage Container(s).

Storing

• Gently Twist-to-Open in anti-clockwise direction to remove Breast Milk Storage Container from the Pump Body (SoftSqroundTM). Assemble a sterilised storage Lid onto the Container to seal. Refer to separate instructions provided with the storage containers.
• Immediately after pumping is completed, place the filled Breast Milk Storage Containers in a cooler with ice pack. Transfer Breast Milk Storage Containers to the refrigerator or freezer once you are home. When freezing, do not fill Container more than printed maximum level to allow space for expansion. Label Container with date and time of pumping and always use the older breast milk first.
• Note : Always refrigerate or freeze expressed milk immediately. Only store expressed milk with a sterilised storage container. Never refreeze thawed expressed milk or add fresh breast milk to frozen breast milk.

Preparing milk
Caution! Do not thaw frozen breast milk in a microwave or in a pan of boiling water. Microwaving can cause uneven heating which lead to hot spots in the milk and could scald your baby. It may also destroy the nutrients in the milk.

• Defrost frozen breast milk overnight in the refrigerator. Thawed milk is safe in the refrigerator for 24 hours. Place the sealed Breast Milk Storage Container in a bowl of hot water for at least 10 minutes
• to bring it to body temperature. Feeding your baby
• Note : It is best to wait till your breastfeeding is well established prior to bottle feeding your baby.
• Swap the storage Lid with a sterilised Teat assembled with Collar to convert the Breast Milk Storage Container into a

Feeding your baby

• Note : It is best to wait till your breastfeeding is well established prior to bottle feeding your baby.
• Swap the storage Lid with a sterilised Teat assembled with Collar to convert the Breast Milk Storage Container into a Feeding Bottle. Always check the temperature of the milk before feeding it to your baby. Excess milk left over after a feed should be discarded. Do not refreeze thawed expressed milk.

Trouble shoot

No or low suction

• Flange (SoftSqroundTM)
  • Ensure Flange (SoftSqroundTM) is held firmly on your breast with a complete seal without air leakage.
• Manual Diaphragm (SoftSqroundTM)
  • Remove and separate Stem from Manual Diaphragm (SoftSqroundTM).
  • Inspect the Stem for cracks or chips. Inspect the Manual Diaphragm (SoftSqroundTM) for holes and tears. Replace component(s) prior to pumping if flaw or damage is observed.
  • Reassemble and ensure Stem is snugly fitted into slot on Manual Diaphragm (SoftSqroundTM).
• Valve
  • Remove Valve from Pump Body (SoftSqroundTM).
  • Inspect the Valve for holes or tears. Replace component(s) prior to pumping if flaw or damage is observed. Wash Valve as per Cleaning Section.
  • Manual Handle (SoftSqroundTM)
  • Ensure Pivot is pinned correctly into the opening at the side of Pump Body (SoftSqroundTM). A clear click should be felt.
• Milk doesn’t flow into container  Valve
  • Check that expressed breast milk is not touching tip of Valve during pumping. Exceeding maximum level may cause leakage and affect pump performance.
• Note : If you regularly express more than 150ml of breast milk per session, use Hegen PCTOTM 240ml/8oz Breast Milk Storage Container(s) to prevent overfilling or spillage.

Accessories, Replacement Parts

• To buy accessories and/or replacement components, visit www.hegen.com. You can also contact our Hegen Customer Service at warranty@hegen.com.
• Copyright © Hegen
• Hegen retains all intellectual property rights to this product and packaging. Including all designs, graphic images and text.
• Any reproduction of materials is strictly prohibited and constitutes infringement.
• All Rights Reserved.
• Patent Pending
• Hegen Pte Ltd
• 438A Alexandra Road
• Block A Alexandra Technopark
• Unit #02-01 Singapore 119967

References

• Hegen | Innovative Baby Products For Parents | Shop Now

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>