hegen EN14350 PPSU Feeding Bottle Instruction Manual

hegen EN14350 PPSU Feeding Bottle

Product Information

Specifications

• Product Name: Hegen PCTOTM Feeding Bottle PPSU
• Material: Polyphenylsulfone (PPSU)
• Phthalate-Free and PVC-Free
• Heat Resistance: Container – B and C, Transparent Cover / Collar / Lid / Adapter – Polypropylene (PP), Teat / Seal – Silicone

FAQ (Frequently Asked Questions)

• Q: Can I use other teats with the Hegen PCTOTM Feeding Bottle PPSU?
  • A: No, only use Hegen teats with Hegen Feeding bottles for optimal performance and safety.
• Q: How often should I replace the teats and other parts?
  • A: For safety and hygiene reasons, we recommend replacing Teats every 3 months and Collar/Lid/Transparent Cover/Container every 6 months.
• Q: Can I sterilize all parts of the bottle?
  • A: Yes, all parts of the Hegen PCTOTM Feeding Bottle PPSU can be sterilized using a suitable sterilization method.

Product Usage Instructions

Teat Flow Rate

Please make sure you use a teat with the correct flow rate when you feed your baby. The Hegen PCTOTM Feeding Bottle PPSU comes with different flow rates:

• 0 – Extra Slow Flow
• 1 – Slow Flow
• 2 – Medium Flow
• 3 – Fast Flow
• Y – Thick Feed

Inspection and Replacement

Inspect all items before each use. Pull the feeding teat in all directions. Throw away at the first sign of damage or weakness. The bottle and accompanying parts may blur after repeat use, wash, warming, and sterilization. For safety and hygiene reasons, we recommend replacing Teats every 3 months and Collar/Lid/Transparent Cover/Container every 6 months.

Compatibility

• Only use Hegen teats with Hegen Feeding bottles.

Assembly and Disassembly

To assemble the Hegen PCTOTM Feeding Bottle PPSU:

1. Twist the transparent cover and lift up to open.
2. Place the teat on the collar.
3. Attach the collar with the teat to the container.
4. Place the lid on top of the collar.

To disassemble the Hegen PCTOTM Feeding Bottle PPSU:

1. Twist the lid to unlock and push down to close.
2. Turn left to unlock the collar from the container.
3. Remove the teat from the collar.
4. Twist right and lift up to open the transparent cover.

Cleaning and Maintenance

The Hegen PCTOTM Feeding Bottle PPSU is designed for easy cleaning. It features a removable seal for easy cleaning. Follow these steps:

1. Disassemble all parts of the bottle.
2. Wash all parts thoroughly with warm soapy water.
3. Rinse all parts with clean water.
4. Sterilize all parts using a suitable sterilization method.

Additional Components

The Hegen PCTOTM Feeding Bottle PPSU can be used with the Manual Breast Pump Module (sold separately). Please refer to the separate manual for instructions on using the breast pump module.

Instructions for Use

Using Instructions

Please make sure you use a teat with the correct flow rate when you feed your baby. Inspect all items before each use. Pull the feeding teat in all directions. Throw away at the first sign of damage or weakness. The bottle and accompanying parts may blur after repeat use, wash, warming and sterilization. For safety and hygiene reasons, we recommend replacing Teats every 3 months and Collar/Lid/Transparent Cover/Container every 6 months.

Only use Hegen teats with Hegen Feeding bottles.
For more information on our products, please visit www.hegen.com.

Product Overview

Precautions

Precautions for your child’s safety and health

• Always use this product within the reach of an adult.
• Do not use the nipple as a pacifier.
• Do not use the product for long periods of time.
• Continuously sucking in drinks may cause tooth decay.
• Before giving drinks or food, be sure to check the temperature.
• Keep parts that are not in use out of the reach of children.
• When using the product for the first time, Please clean the product.
• Before each use, pull the nipple in all directions to check its condition. Signs of damage or deterioration If there is any problem, please discard it immediately.
• Do not expose the nipple to direct sunlight or heat, or put it in a chemical solution (“disinfectant”) for longer than the specified time.
• Please do not leave it unattended as it will deteriorate. For hygiene reasons, boil it in boiling water for 5 minutes before using it for the first time.
• Wash before each use
• Dishwasher safe (upper rack only).

Food coloring, mill

• If the components of the oil or fat are heated, the parts may become discolored or discoloured and may not return to their original state.
• Do not heat the contents in a microwave. It may not heat up evenly and cause your child to get burned. preheated
• Do not use oven or microwave. Be sure to mix the contents well to even out the temperature before giving to your child.
• Please check the temperature.
• This product is not a toy.
• Children should not play with small parts or hold baby bottles or cots.
• Please be careful not to walk or run while using the product. Doing so may cause strangulation.
• Do not attach it to bongs or strings.
• Do not use detergents or solvents containing abrasives as this may cause damage.
• Do not place parts directly on areas that have been cleaned with disinfectant cleaner.
• Plastic materials cannot be exposed to high temperatures or disinfection.
• This may affect the fit and appearance of the product.
• To ensure a leak-free seal, each part must be
• It is necessary to set it correctly.
• If you put expressed breast milk into a sterilized Hagen baby bottle/breast milk storage container, it will
• Can be stored in the refrigerator for 48 hours (door pockets are not allowed) or in the freezer for 3 to 6 months.
• Breast milk can be refrozen or refrigerated/frozen.
• Do not add new breast milk to old breast milk.

Washing

• Always wash your hands with soap before cleaning, disinfecting, and breastfeeding. For hygiene reasons, please wash your hands before using for the first time.
• Remove all items, wash with baby bottle detergent, rinse thoroughly with clean water, and disinfect. Immediately after each use
• Remove all parts and wash the product with baby bottle detergent.
• When using the dishwasher (upper rack only), remove all parts.
• Do not use high temperature settings as this may cause deformation.
• Do not use strong detergents, abrasive detergents, solvents, or disinfectants.
• Clean the “colic prevention air valve” on the nipple.
• Please be careful when cleaning.
• Gently rub the “colic prevention air valve” and nipple holes in hot water with your fingers. (See Figure 9).
• Nipples are easily damaged, so if you don’t handle them carefully, the “colic prevention air valve” will tear and cause leakage.
• If you use a nipple cleaning brush or other equipment to clean the “colic prevention air valve” on the nipple, it may be damaged. Please do not use a baby bottle cleaning brush with a wire as it may cause minor scratches.
• Remember to clean all sides of the baby bottle, as well as the bottom and cap.
• Do not turn the nipple over when cleaning. Sai. There is a risk of damage.

Disinfection

• Steam disinfection (electricity), boiling disinfection, and chemical disinfection using cold water and tablets/chemicals are possible.

Electrical steam disinfection

• When disinfecting, please follow the instructions on the disinfection equipment.
• When disinfecting by boiling, bring the water to a boil and place the parts in the boiling water.
• Please soak it in. Do not leave it for more than 3 minutes.
• When disinfecting, parts made of different materials may react and deform.
• Remove all parts completely before disinfecting to prevent permanent discoloration of parts.
• Thoroughly remove all grease
• Disinfect your prints by disinfecting them with chemicals, hand cream, or sunscreen. may fade.

Set

• Correct setting is necessary to prevent leaks. Gently pinch the “Colic Prevention Air Valve” to check if there is a hole.
• Please check with. (1) Location of the “anti-colic air valve” and the raised side of the hood with the Hagen logo Match. (2) Pass the nipple through the hood and pull until it is firmly seated. Note: If you pull all the nipples out of the hood
• If you can, you have set it incorrectly. (3a) Cover the set hood and nipple with a transparent cap. Masu. (3b) Open the transparent cap by tilting it back (do not pull it up). (4) Set cap, breast
• Hold the neck, hood, and press it onto the bottle to close it. (5) For tighter tightening, please turn clockwise. (6) counterclockwise
• Turn it to open it. (7) If you replace it with the Hagen Breast Milk Storage Lid, it will turn from a baby bottle into a breast milk storage container. (8)

Seal Storage

• Therefore, be sure to attach the gasket (with the Hagen logo visible) to the lid.
• When feeding your baby, use a nipple that produces the right amount of milk. Clean all parts before each use please confirm. Pull the nipple in all directions. If there is any sign of damage or deterioration, please discard it.
• For safety and hygiene, we recommend replacing the nipples every three months.
• Please use Hagen nipples with Hagen baby bottles.

For more product information, please visit www.hegen.com.

Copyright © Hegen

Hegen retains all intellectual property rights to this product and packaging. Including all designs, graphic images and text.
Any reproduction of materials is strictly prohibited and constitutes infringement.

All Rights Reserved.
Patent Pending

Hegen Pte Ltd

• 438A Alexandra Road
• Block A Alexandra Technopark
• Unit #02-01 Singapore 119967

References

• Hegen | Innovative Baby Products For Parents | Shop Now

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>