Doraimy Lighting 5040X3 3 Light 12 Crystal Hanging Kitchen Instruction Manual
- May 15, 2024
- Doraimy Lighting
Table of Contents
Doraimy Lighting 5040X3 3 Light 12 Crystal Hanging Kitchen
Dear customer,
Thank you for choosing Our Lighng. If you have any concerns or questions about
our products, please do not hesitate to contact us directly. We’ll provide the
best service for you. Hope you enjoy the shopping experience!
Any questions please free to contact us:
Email : nikki@doraimilight.com
Assembly Instructions
WARNING:
- It is strongly suggested that all hardwired fixtures be installed by a professional electrician..
- To reduce the risk of fire, electrical shocks or personal injuries, always turn off the light fixture and let it cool prior to replacing the light bulbs.
- Do not touch the bulb when fixture is turned on; do not look directly at a lit bulb.
- Keep flammable materials away from a lit bulb.
- Shut off all the main electrical supply from the fuse box/circuit breaker
- Use E12 TYPE B CFL 6W, LED 4W bulb types and wattages. Do not exceed the recommended wattage
SKU :# 6125/6034BX (Not included the bulb)
Parts Included
Hardware Enclosed
INSTALLATION STEPS
-
Step 1:
-
Remove all parts and hardware from box along with all plastic protective packaging.
-
Unscrew the pre-assembled Canopy Nuts (F) from Mounting Plate(D).
-
Step 2:
-
Secure the Metal Tube(G) to the Shade(H).
-
Secure the Canopy(E) to the Metal Tube(G).
-
Step 3:
-
Gently pull the wire in the ceiling junction box and let the wire hang.
-
Attach Mounting Plate (D) to the junction box.
-
Secure the Mounting Plate (D) by tightening 2 Junction Box Screws (C) with a screwdriver.
-
Step 4:
Connect the white wire of the fixture to the white wire of the supply circuit. Connect the black wire of the fixture to the black wire of the supply circuit. Connect the Ground fixture wire with the Ground J-Box wire, with the Wire Connector(A) .
-
Step 5:
Place the Canopy (E) against the mounting surface and fasten the Canopy Nuts(F) to the Mounting Plate (D).
-
Step 6:
Install bulbs(not included) into the Socket(I).