lord C15 Combined Fridge Freezer User Manual

June 2, 2024
LORD

lord C15 Combined Fridge Freezer

lord C15 Combined Fridge Freezer

Dear Customer

Thank you for buying this fridge-freezer. To ensure that you get the best results from your new appliance, please take time to read through the simple instructions in this booklet.
Please ensure that the packing material is disposed of in accordance with the current environmental requirements.
When disposing of any appliance equipment please contact your local waste disposal department for advice on safe disposal.
This appliance must be only used for its intended purpose. This appliance is intended to be used in household.

SAFETY WARNINGS

Warning: risk of fire / flammable materials

  • This appliance is intended to be used in household and similar applications such as staff kitchen areas in shops, offices and other working environments; farm houses and by clients in hotels, motels and other residential type environments; bed and breakfast type environments; catering and similar nonretail applications.

  • This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.)

  • Children should be supervised to ensure that they do not play with the appliance.

  • If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

  • Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.

  • The appliance has to be unplugged after use and before carrying out user maintenance on the appliance.

  • Warning : Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.

  • Warning : Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.

  • Warning : Do not damage the refrigerant circuit.

  • Warning : Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer.

  • Warning : Please abandon the refrigerator according to local regulators for it use flammable blowing gas and refrigerant.

  • Warning : When positioning the appliance, ensure the supply cord is not trapped or damaged.

  • Warning : Do not locate multiple portable socket-outlets or portable power supplies at the rear of the appliance.

  • Do not use extension cords or ungrounded (two prong ) adapters.

  • Danger : Risk of child entrapment. Before you throw away your old refrigerator or freezer:
    – Take off the doors.
    – Leave the shelves in place so that children may not easily climb inside.

  • The refrigerator must be disconnected from the source of electrical supply before attempting the installation of accessory.

  • Refrigerant and cyclopentane foaming material used for the appliance are flammable. Therefore, when the appliance Is scrapped, It shall be kept away from any fire source and be recovered by a special recovering company with corresponding qualification other than be disposed by combustion, so as to prevent damage to the environment or any other harm.

  • For EN standard: This appliance can be used by children aged from 8 years and above and persons with reduce physical sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
    Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. Children aged from 3 to 8 years are allowed to load and unload refrigerating appliances.

  • The necessity that, for doors or lids fitted with locks and keys, the keys be kept out of the reach of children and not in the vicinity of the refrigerating appliance, in order to prevent children from being locked inside.

  • To avoid contamination of food, please respect the following instructions:

    • Opening the door for long periods can cause a significant increase of the temperature in the compartments of the appliance.
    • Clean regularly surfaces that can come in contact with food and accessible drainage systems.
    • Clean water tanks if they have not been used for 48 h; flush the water system connected to a water supply if water has not been drawn for 5 days, (note 1)
    • Store raw meat and fish in suitable containers in the refrigerator, so that it is not in contact with or drip onto other food.
    • Two-star frozen-food compartments are suitable for storing pre-frozen food, storing or making ice-cream and making ice cubes. ( note 2 )
    • One-, two- and three-star compartments are not suitable for the freezing of fresh food, (note 3)
    • For appliances without a 4-star compartment: this refrigerating appliance is not suitable for freezing foodstuffs, (note 4)
    • If the refrigerating appliance is left empty for long periods, switch off, defrost, clean, dry, and leave the door open to prevent mould developing within the appliance.
      Note 1,2,3,4: Please confirm whether it is applicable according to your product compartment type.
  • For a freestanding appliance: this refrigerating appliance is not intended to be used as a built-in appliance.

  • For appliance with chill compartment: some types of fresh vegetables and fruits are sensitive to cold, and that therefore they are not suitable for storage in this kind of compartment

  • Any replacement or maintenance of the LED lamps is intended to be made by the manufacturer, its service agent or similar qualified person.
    This product contains a light source of energy efficiency class (G).

Meaning of safety warning symbols

Prohibition symbol| This is a prohibition symbol.
Any in compliance with instructions marked with this symbol may result in damage to the product or endanger the personal safety of the user
---|---
Warning symbol| This is a warning symbol.
It is required to operate in strict observance of instructions marked with this symbol; or otherwise damage to the product or personal injury may be caused.
Note symbol| This is a cautioning symbol.
Instructions marked with this symbol require special caution. Insufficient caution may result in slight or moderate injury, or damage to the product.

This manual contains lots of important safety information which shall be observed by the users.

Electricity related warnings

  • Do not pull the power cord when pulling the power plug of the refrigerator. Please firmly grasp the plug and pull out it from the socket directly.
    Electricity Related Warnings

  • To ensure safe use, do not damage the power cord or use the power cord when it is damaged or worn.
    Electricity Related Warnings

  • Please use a dedicated power socket and the power socket shall not be shared with other electrical appliances. The power plug should be firmly contacted with the socket or else fires might be caused. Please ensure that the grounding electrode of the power socket is equipped with a reliable grounding line.
    Electricity Related Warnings

  • Please turn off the valve of the leaking gas and then open the doors and windows in case of leakage of gas and other flammable gases. Do not unplug the refrigerator and other electrical appliances considering that spark may cause a fire.

  • Do not use electrical appliances on the top of the appliance, unless they are of the type recommended by the manufacturer.
    Electricity Related Warnings

Warnings for using

  • Do not arbitrarily disassemble or reconstruct the refrigerator, nor damage the refrigerant circuit; maintenance of the appliance must be conducted by a specialist.
    Warnings For Using

  • Damaged power cord must be replaced by the manufacturer, its maintenance department or related professionals in order to avoid danger.

  • The gaps between refrigerator doors and between doors and refrigerator body are small, be noted not to put your hand in these areas to prevent from squeezing the finger. Please be gentle when close the refrigerator door to avoid falling articles.
    Warnings For Using

  • Do not pick foods or containers with wet hands in the freezing chamber when the refrigerator is running, especially metal containers in order to avoid frostbite.

  • Do not allow any child to get into or climb the refrigerator; otherwise suffocation or falling injury of the child may be caused.
    Warnings For Using

  • Do not place heavy objects on the top of the refrigerator considering that objects may fall when close or open the door, and accidental injuries might be caused.

  • Please pull out the plug in case of power failure or cleaning. Do not connect the refrigerator to power supply within five minutes to prevent damages to the compressor due to successive starts.
    Warnings For Using

Warnings for storage

  • Do not put flammable, explosive, volatile and highly corrosive items in the refrigerator to prevent damages to the product or fire accidents.
    Warnings For Storage

  • Do not place flammable items near the refrigerator to avoid fires.

  • The refrigerator is intended for household use, such as storage of foods; it shall not be used for other purposes, such as storage of blood, drugs or biological products, etc.
    Warnings For Storage

  • Do not store beer, beverage or other fluid contained in bottles or enclosed containers in the freezing chamber of the refrigerator; or otherwise the bottles or enclosed containers may crack due to freezing to cause damages.
    Warnings For Storage

Warnings for energy

  1. Refrigerating appliances might not operate consistently (possibility of defrosting of contents or temperature becoming too warm in the frozen food compartment) when sited for an extended period of time below the cold end of the range of temperatures for which the refrigerating appliance is designed.
  2. The fact that effervescent drinks should not be stored in food freezer compartments or cabinets or in low-temperature compartments or cabinets, and that some products such as water ices should not be consumed too cold;
  3. The need to not exceed the storage time(s) recommended by the food manufacturers for any kind of food and particularly for commercially quick-frozen food in food-freezer and frozen-food storage compartments or cabinets;
  4. The precautions necessary to prevent an undue rise in the temperature of the frozen food while defrosting the refrigerating appliance, such as wrapping the frozen food in several layers of newspaper.
  5. The fact that a rise in temperature of the frozen food during manual defrosting, maintenance or cleaning could shorten the storage life.

Warnings for disposal

Refrigerant and cyclopentane foaming material used for the refrigerator are flammable. Therefore, when the refrigerator is scrapped, it shall be kept away from any fire source and be recovered by a special recovering company with corresponding qualification other than be disposed by combustion, so as to prevent damage to the environment or any other harm.

When the refrigerator is scrapped, disassemble the doors, and remove gasket of door and shelves; put the doors and shelves in a proper place, so as to prevent trapping of any child.

Correct Disposal of this product:
This marking indicates that this product should not be disposed with other household wastes. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources.
To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.

PROPER USE OF REFRIGERATORS

Placement

  • Before use, remove all packing materials, Including bottom cushions, foam pads and tapes inside of the refrigerator; tear off the protective film on the doors and the refrigerator body.
    Placement

  • Keep away from heat and avoid direct sunlight. Do not place the freezer in moist or watery places to prevent rust or reduction of insulating effect.
    Placement

  • Do not spray or wash the refrigerator; do not put the refrigerator in moist places easy to be splashed with water so as not to affect the electrical insulation properties of the refrigerator.
    Placement

  • The refrigerator is placed in a well-ventilated indoor place; the ground shall be flat, and sturdy (rotate left or right to adjust the feet for levelling if unstable).

  • The top space of the refrigerator shall be greater than 30cm, and the refrigerator should be placed against a wall with a free distance more than 10cm to facilitate heat dissipation.
    Placement

INSTALL THE LIMIT BLOCK LIMIT BLOCK

  • The limit block is included in the attachment package.
  • In order to better dissipate heat from the back condenser and reduce the power consumption of the refrigerator, it is necessary to install limit blocks on the refrigerator.
  • Take out the limit block from the attachment package, tear off the adhesive backing paper, and apply it along the upper corner of the back, one on each corner.
    Install The Limit Block Limit Block

Precautions before installation:

Before installation or adjusting of accessories, it shall be ensured that the refrigerator is disconnected from power.
Precautions shall be taken to prevent fall of the handle from causing any personal injury.

Leveling feet

Schematic diagram of the leveling feet.

Install The Limit Block Limit Block

(The picture above is only for reference. The actual configuration will depend on the physical product or statement by the distributor)

Adjusting procedures:

  • a. Turn the feet clockwise to raise the refrigerator;
  • b. Turn the feet counterclockwise to lower the refrigerator;
  • c. Adjust the right and left feet based on the procedures above to a horizontal level.

Door right-left change

List of tools to be provided by the user

| Cross screwdriver| | Putty knife thin-blade screwdriver
| 5/16“ socket and ratchet| | Masking tape

  1. Please power off this appliance before conduct this operation. Remove all food from door shelves.

  2. Remove the upper left hinge cover decorative cover, upper right hinge cover and upper right hinge, and disconnect the right signal line (signal line terminal 1,2) at the top of the box body.
    Door Right-left Change

  3. Remove the refrigerated door body (be careful not to lose small parts such as the shaft sleeve and stop on the door);
    Remove the middle hinge and remove the decorative cover of hinge hole on the other side.
    Door Right-left Change

  4. Remove the freezing door body (be careful not to lose small parts such as the shaft sleeve and stop on the door);
    Remove the hinge and adjust the angle. Remove and install the lower hinge shaft to the other side of the hinge, and install the modified lower hinge to the other side of the box.
    Door Right-left Change

  5. Change the refrigerator door:

  6. Remove the cover plate of the upper end cover of the refrigeration door and the left decorative cover. Install the upper shaft sleeve and the signal line of the door body to the other side and cover the upper end cover plate. Take out the right decorative cover from the accessory bag and install it to the other side of the upper end cover.

  7. Remove the door self-locking, door stop and shaft sleeve of the refrigeration door, take out the left door self-locking from the accessory bag, install it on the left side of the lower end cover of the refrigeration door, change the door stop and shaft sleeve to the left side of the lower end cover of the refrigeration door.
    Door Right-left Change

  8. Change the freezing door:

  9. Remove the shaft sleeve and cap of the upper end cover of the freezing door and install them at the left and right swap positions.

  10. Remove the door self-locking, doorstop and shaft sleeve of the freezing door, take out the left door self-locking from the accessory bag, install it on the left side of the lower end cover of the freezing door, change the door stop and shaft sleeve to the left side of the lower end cover of the freezing door.
    Door Right-left Change

  11. Install the replaced freezing door on the lower hinge, then install the middle hinge and cover the hinge hole decorative cover.
    Door Right-left Change

  12. Remove the upper left hinge cover and upper left hinge from the accessory bag.
    Place the refrigerated door body on the middle hinge and install the upper left hinge. Connect the refrigerator top signal line 4 to the door body signal line 1, and connect the signal line 2 to the signal line 3.
    Finally, replace the hinge decorative cover to the right side of the box body (note: when replacing the hinge decorative cover to the right side of the box body, the two inserts on the hinge decorative cover (as shown in the figure) shall be cut off).
    Door Right-left Change

(The picture above is only for reference. The actual configuration will depend on the physical product or statement by the distributor)

Changing the Light

Any replacement or maintenance of the LED lamps is intended to be made by the manufacturer, its service agent or similar qualified person.

Starting

  • Before initial start, keep the refrigerator still for two hours before connecting it to power supply.

  • Before putting any fresh or frozen foods, the refrigerator shall have run for 2-3 hours, or for above 4 hours in summer when the ambient temperature is high.

  • Spare enough space for convenient opening of the doors and drawers or statement by the distributor.
    Changing The Light

Energy saving tips

  • The appliance should be located in the coolest area of the room, away from heat producing appliances or heating ducts, and out of the direct sunlight.
  • Let hot foods cool to room temperature before placing in the appliance. Overloading the appliance forces the compressor to run longer. Foods that freeze too slowly may lose quality, or spoil.
  • Be sure to wrap foods properly, and wipe containers dry before placing them in the appliance. This cuts down on frost build-up inside the appliance.
  • Appliance storage bin should not be lined with aluminium foil, wax paper, or paper toweling. Liners interfere with cold air circulation, making the appliance less efficient.
  • Organize and label food to reduce door openings and extended searches. Remove as many items as needed at one time, and close the door as soon as possible.

STRUCTURE AND FUNCTIONS

Key components

Key Components

(The picture above is only for reference. The actual configuration will depend on the physical product or statement by the distributor)

Refrigerating chamber

  • The Refrigerating Chamber is suitable for storage of a variety of fruits, vegetables, beverages and other food consumed in the short term,suggested storage time 3days to 5days.
  • Cooking foods shall not be put in the refrigerating chamber until cooled to room temperature.
  • Foods are recommended to be sealed up before putting into the refrigerator.
  • The glass shelves can be adjusted up or down for a reasonable amount of storage space and easy use.

Freezing chamber

  • The low temperature freezing chamber may keep food fresh for a long time and it is mainly used to store frozen foods and making ice.
  • The freezing chamber is suitable for storage of meat, fish, rice balls and other foods not to be consumed in short term.
  • Chunks of meat are preferably to be divided into small pieces for easy access. Please be noted food shall be consumed within the shelf time. Drawers, food boxes, shelves, etc. placed according to the position in the picture above are the most energy efficient.

Functions

Functions

(The picture above is only for reference. The actual configuration will depend on the physical product or statement by the distributor)

Display screen

  1. Refrigerating chamber temperature display area
  2. Freezing chamber temperature display area
  3. Quick cool icon
  4. Quick freeze icon
  5. Vacation icon
  6. Lock icon

Operation button

  • A. Temperature setting button of refrigerating chamber
  • B. Temperature setting button of freezing chamber
  • C. Super cool/super freezing button

Display

When power on the refrigerator for the 1st time, the whole display panel will shine for 3 seconds. Then the display panel enters the normal display. The first time for using the refrigerator,the default set temperatures of refrigerating chamber, freezing chamber is 5° C/-18 °C respectively.
When the error occurs, the display panel shows the error code (see next page); during normal running, the display panel shows the set temperature of refrigerating chamber, freezing chamber.
Under normal running, if there is no operation or opening door action within 30s, the display panel will be locked,the light of display panel will go out after the locked state continued for 30s.

Lock/unlock

In the non-locking state, press and hold the super-cool /super-freezer button for 3 seconds to enter the locked state and the lock buzzer will sound.
In the locked state, press and hold the super-cool /super-freezer button for 3 seconds to enter the unlocked state and the unlocking buzzer will sound.
After 30 seconds of no button operation, it will automatically enter the locked state, and the external display board with a music buzzer will sound the lock buzzer at the same time.
The alarm sound release operation can be carried out in the locked state, and all other key operations must be carried out in the unlocked state.
If the operation is in the locked state, an error buzzer will be displayed.

Temperature setting of refrigerating chamber

Click the button to change the set temperature of refrigerating chamber, each click of temperature adjusting button of the refrigerating chamber, the set temperature will be reduced 1 °C. The temperature setting range of refrigerating chamber is 2~8 °C. When the set temperature is 2° C, Click the button again, the set temperature of refrigerating chamber will switch to 8° C.

Temperature setting of freezing chamber

Click the button to change the set temperature of freezing chamber, each click of temperature adjusting button of the freezing chamber, the set temperature will be reduced 1 °C. The temperature setting range for freezing chamber is -24- -16 °C.
When the temperature is -24 °C, click the button again, the set temperature of freezing chamber will switch to -16 °C.

Mode setting

Long press the refrigeration temperature adjustment button (3s) to set/cancel the vacation mode When setting the vacation mode, the refrigeration is turned off, the refrigeration temperature display area is extinguished, and the freezing is automatically set to -18°C;

Adjusting the refrigeration/freezing/super cool and super freezer buttons will exit the vacation mode.
When exiting the vacation mode, the refrigeration set temperature will automatically return to the set temperature before the vacation mode; the freezing set temperature will automatically return to t he set temperature before the vacation mode; enter the normal operation mode.

Quick freeze mode

Super cool and super freezer mode, press the super cool/super freezer button, the setting sequence is: super cool -> super freezer -> cancel.
When setting/cancelling the super cool mode, the corresponding super cool icon is on/ off; when setting the super cool mode, the refrigeration is automatically set to 2°C; When exiting the super-cool mode, the set temperature of the refrigerating room will automatically return to the set temperature before the quick-cooling mode; When the super-freezer mode is set, the corresponding super-freezer icon is lit; when the super-freezer mode is set, the freezing is automatically set to -24°C; When exiting the super- freezer mode, the set temperature of the freezer compartment will automatically return to the set temperature before the super-freezer mode; Super cool mode automatically disabled for 6H.
Super freezer mode automatically disabled for 24H.
Recommended setting: refrigerated chamber 4 °C freezing chamber – 18C.
Note: The super-freezer function is designed to maintain the nutritional value of the food in the freezer. It can freeze the food in the shortest time. If a large amount of food is frozen at one time, it is recommended that the user turn on the quick freezing function and put the food in. At this time, the freezing speed of the freezer compartment is increased, which can quickly freeze the food, effectively lock the nutrition of the food, and facilitate storage.

Opening warning and alarm control

When open the refrigerate door, the door open music will play. If the door is not closed in two minutes, the buzzer will sound until the door is closed. Press any one button to stop the buzzer alarm.

Fault indication

The following warnings appearing on the display indicate corresponding faults of the refrigerator. Though the refrigerator may still have cold storage function with the following faults, the user shall contact a maintenance specialist for maintenance, so as to ensure optimized operation of the appliance.

Fault Code Fault Description
E1 Temperature sensor failure of refrigerating chamber
E2 Temperature sensor failure of freezing chamber
E3 Temperature sensor failure of meat & fish zone
E5 Freezing defrost sensor detection circuit error
E6 Communication error
E7 Ambient temperature sensor error

MAINTENANCE AND CARE OF THE APPLIANCE

Overall cleaning

  • Dusts behind the refrigerator and on the ground shall be timely cleaned to improve the cooling effect and energy saving.
  • Check the door gasket regularly to make sure there are no debris. Clean the door gasket with a soft cloth dampened with soapy water or diluted detergent.
  • The interior of the refrigerator should be cleaned regularly to avoid odor.
  • Please turn off the power before cleaning interior, remove all foods, drinks .shelves, drawers, etc.
  • Use a soft cloth or sponge to clean the inside of the refrigerator, with two tablespoons of baking soda and a quart of warm water. Then rinse with water and wipe clean. After cleaning, open the door and let it dry naturally before turning on the power.
  • For areas that are difficult to clean in the refrigerator (such as narrow sandwiches, gaps or corners), it is recommended to wipe them regularly with a soft rag, soft brush, etc. and when necessary, combined with some auxiliary tools (such as thin sticks) to ensure no contaminants or bacterials accumulation in these areas.
  • Do not use soap, detergent, scrub powder, spray cleaner, etc., as these may cause odors in the interior of the refrigerator or contaminated food.
  • Clean the bottle frame, shelves and drawers with a soft cloth dampened with soapy water or diluted detergent. Dry with a soft cloth or dry naturally.
  • Wipe the outer surface of the refrigerator with a soft cloth dampened with soapy water, detergent, etc., and then wipe dry.
  • Do not use hard brushes, clean steel balls, wire brushes, abrasives (such as toothpastes), organic solvents (such as alcohol, acetone, banana oil, etc.), boiling water, acid or alkaline items, which may damage the fridge surface and interior. Boiling water and organic solvents such as benzene may deform or damage plastic parts.
  • Do not rinse directly with water or other liquids during cleaning to avoid short circuits or affect electrical insulation after immersion.
    Overall Cleaning

Please unplug the refrigerator for defrost and cleaning.

Cleaning the glass shelf

  • Remove the drawer on the glass shelf;
  • Lift up the front of glass shelf (about 60°), and then pull out;
  • Remove the glass shelf and clean as needed;
  • The reverse operation is for installation of glass shelf.
    Cleaning The Glass Shelf

Defrosting

  • The refrigerator is made based on the air-cooling principle and thus has automatic defrosting function. Frost formed due to change of season or temperature may also be manually removed by disconnection of the appliance from power supply or by wiping with a dry towel.

Environmental temperature| Interval between two defrosting cycles| Interval between two defrosting cycles| Specific conditions
---|---|---|---
32 °C| Minimum two defrosting intervals

(△ td-min)

| 12 h| Heavy use, frequent opening of doors
Maximum two defrosting intervals (△ td-min)| 96 h| Under low humidity conditions, there is no door opening action and no special mode is set

Out of operation

  • Power failure: In case of power failure, even if it is in summer, foods inside the appliance can be kept for several hours; during the power failure, the times of door opening shall be reduced, and no more fresh food shall be put into the appliance.
  • Long-time nonuse: The appliance shall be unplugged and then cleaned; then the doors are left open to prevent odor.
  • Moving: Before the refrigerator is moved, take all objects inside out, fix the glass partitions, vegetable holder, freezing chamber drawers and etc. with tape, and tighten the leveling feet; close the doors and fix them with tape. During moving, the appliance shall not be laid upside down or horizontally, or be vibrated; the inclination during movement shall be no more than 45°.

The appliance shall run continuously once it is started. Generally, the operation of the appliance shall not be interrupted;otherwise the service life may be impaired.

TROUBLESHOOTING

You may try to solve the following simple problems by yourself. If them cannot be solved, please contact the after-sales department.

Failed operation| Check whether the appliance Is connected to power or whether the plug Is In well contact
Check whether the voltage Is too low
Check whether there Is a power failure or partial circuits have tripped
---|---
Odor| Odorous foods shall be tightly wrapped Check whether there Is any rotten food Clean the inside of the refrigerator
Long-time operation of the compressor| Long operation of the refrigerator is normal in summer when the ambient temperature is high
It is not recommended having too much food in the appliance at the same time Food shall get cool before being put into the appliance The doors are opened too frequently
Light falls to get lit| Check whether the refrigerator is connected to power supply and whether the illuminating light is damaged
Doors cannot be properly closed| The door is stuck by food packages The refrigerator is tilted
Loud noise| Check whether the floor is level and whether the refrigerator is placed stably
Check whether accessories are placed at proper locations
Door seal falls to be tight| Remove foreign matters on the door seal
Heat the door seal and then cool it for restoration (or blow it with an electrical drier or use a hot towel for heating)
Water pan overflows| There is too much food in the chamber or food stored contains too much water,resulting in heavy defrosting
The doors are not closed properly, resulting in frosting due to entry of air and increased water due to defrosting
Hot housing| Heat dissipation of the built-in condenser via the housing, which is normal. When housing becomes hot due to high ambient temperature and storage of too much food,it is recommended to provide sound ventilation to facilitate heat dissipation.
Surface condensation| Condensation on the exterior surface and door seals of the refrigerator is normal when the ambient humidity is too high. Just wipe the condensate with a clean towel
Abnormal noise| Buzz: The compressor may produce buzzes during operation, and the buzzes are loud particularly upon start or stop. This is normal.
Creak: Refrigerant flowing inside of the appliance may produce creak, which is normal.

Extended temperate SN: „this refrigerating appliance is intended to be used at ambient temperatures ranging from 10 °C to 32 °C“;
Temperate N: „this refrigerating appliance is intended to be used at ambient temperatures ranging from 16 °C to 32 °C“;
Subtropical ST: „this refrigerating appliance is intended to be used at ambient temperatures ranging from 16 °C to 38 °C“;
Tropical T: „this refrigerating appliance is intended to be used at ambient temperatures ranging from 16 °C to 43 °C“;

Authorized service center contact information can be found at www.lord.eu. Spare parts can also be ordered at the authorized service center.
According to the respective ecodesign regulation, spare parts can be obtained from the authorized service center for at least 7 or 10 years (based on the spare part type) since the last appliance model item has been placed on the market of the European Economic Area.

Please have the identification mark of the model and the serial number at hand before contacting the authorized service center.
The identification mark of the model and the serial number of the product can be found at the rating label placed on the outside surface at the rear of the appliance. We recommend that you write the data from the production label into this manual before you place the appliance to the place where it will be operated to facilitate finding the data later.
The QR code on the energy label supplied with the appliance provides a web link to the information related to the performance of the appliance in the EU EPREL database. It is also possible to find the same information in EPREL using the link
for C15 2.GN: https://eprel.ec.europa.eu/qr/1439329,
for C16 2.GN: https://eprel.ec.europa.eu/qr/1439331.

Customer Support

LORD Hausgeräte GmbH
Greschbachstraße 17
76229 Karlsruhe
Deutschland
info@lord.eu
www.lord.eu

Logo

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

LORD User Manuals

Related Manuals