Sunco BK-2760K Recessed LED Lighting 6 Disk Down User Manual

Sunco BK-2760K Recessed LED Lighting 6 Disk Down

Product Information

Specifications

• Voltage: 120V
• Wattage: 15W
• Frequency: 60Hz
• Efficacy: 65lm/w
• Weight: 0.6lbs
• Housing Material: ALU+PC
• Dimmable: Yes

Product Details

Recommended Dimmers

• LEVITON
• LUTRON

Compatible Dimmer List
Check the product manual for a full list of compatible dimmers.

FAQ

• Q: Can I install the LED 6 Disk Downlight myself?
  A: Yes, you can install the downlight following the provided installation guides. Ensure to follow all safety instructions and turn off the power before installation.

• Q: How do I choose the colour temperature for the light?
  A: To choose from 5 colour temperature options, slide the CCT switch on the fixture. Make your selection before completing the installation process.

• Q: Is the LED 6 Disk Downlight suitable for wet locations?
  A: The downlight has a moisture rating of Wet, making it suitable for indoor use in areas where moisture may be present.

What’s in the Box

Disk Downlight

Safety Information

To reduce the risk of fire, electric shock, or physical injury:

• Turn off the circuit breaker before installing this fixture.
• This product should be installed by a person familiar with the construction and operation of the product and the hazards involved. Safety eyeglasses and gloves are recommended.
• Abide by related regional and local laws or regulations.
• Proper grounding is required to ensure safety.
• Do not alter, relocate, or remove wiring during installation.
• Do not make or alter any open holes in the wiring enclosure or electrical components during installation.
• Check for shipping damage before installing. If the product is damaged, do not use it.
• Keep fixtures away from corrosive substances.
• Suitable for damp locations at temperatures ranging from
  • 4°F to 104°F. Not for use where directly exposed to water.
• Clean the fixture regularly to ensure proper operation. Do not clean with harsh solvents.
• Use safety precautions and abide by regional and local laws or regulations.
• This product is not compatible with 3rd party sensors.
• This product is not compatible with photo controls.
• This product is not compatible with occupancy sensors.
• This product is not compatible with timing devices.

WARNING:
Cancer & Reproductive Harm- www.P65Warnings.ca.gov.

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference that may cause undesired operation. Please review all instructions carefully before installation.

Quickstart Guide

Installation Guide

Installation Guide (Surface Mount)

• STEP 1

  • Turn off the circuit breaker before installation.
    NOTE: Remove the previous fixture. The fixture may be hot so allow time to cool after turning off the power.

• STEP 2
  Remove the lens by twisting it clockwise.

• STEP 3

  • Connect the supply wires to the junction box wires using the nuts provided.
  • White to White; Black to Black; Ground wire.

• STEP 4

  • Turn on the power and test light.
  • Slide the CCT switch to choose from 5 colour temperature options, then turn off the light & continue the installation.

• STEP 5

  • Tuck the connected wires inside the junction box.
  • Attach the fixture to the junction box with long screws attached depending on the junction box size (deep or shallow).
    NOTE: DO NOT OVER TIGHTEN.

• STEP 6
  Complete the installation by screwing the lens back into place (counterclockwise).

Installation Guide (Retrofit Install)

• STEP 1

  • Turn off the circuit breaker before installation.
    NOTE: Remove the previous fixture. The fixture may be hot so allow time to cool after turning off the power.

• STEP 2
  Securely inlay the spring iron bracket and mounting patch, ensuring stability. Additionally, securely inlay the 6-inch disk & mounting patch to maintain stability.

• STEP 3

  • Connect the Black wire to the “+” position and the White wire to the “-” position.
  • Connect the disk light to the socket in the recessed can. Tuck the ground away.

• STEP 4

  • Turn on the power and test light.
  • Slide the CCT switch to choose from 5 colour temperature options, then turn off the light and continue the installation.
  • Tuck all wires into the can.

• STEP 5

  • Line up the trim ring with the opening.
  • Push the disk into the can until secure. Compression clips will hold the disk light in place. Push up spring clips and insert fixture into ceiling.

• STEP 6
  Turn on the circuit breaker and test the light.

Recommended Dimmers

Scan for the full compatible dimmer list!

Specifications

Common Troubleshooting

Feeling in the dark about an issue with your product?
No worries! Our troubleshooting section is here to shed some light and provide you with easy-to-follow solutions for any problem.

If you still need some assistance, please feel free to contact us with any questions. Our team of lighting Double-check is happy to help brighten your day.

Installation

• The light isn’t turning on.
  Double-check if the fixture is properly connected and the circuit breaker hasn’t been tripped.

• Light unexpectedly fails.
  For further assistance, reach out to customer support.

Dimming

• Light not dimming to the lowest setting.
  Ensure minimum dimmer load requirement is met.

• Light not dimming smoothly.
  Verify dimmer compatibility with fixture.

• Light not compatible with dimmer switch.
  Check light-dimmer compatibility. Consider purchasing a compatible switch if necessary.

Flickering

• Light is flickering when turning on.
  Check that fixture wiring connections are secure.

• Light flickering with other lights on the same circuit.
  Check that the lights on the same circuit are not overloading the circuit.

• Light flickering when turned on.
  Verify fixture compatibility and that it is grounded.

• Light flickering when dimmed.
  Verify dimmer switch compatibility.

Buzzing

• Fixture buzzing with power outages.
  Verify light is connected to the surge protector securely.

• Fixture buzzing with appliances or electronic devices.
  Look for nearby interferences that can cause buzzing. Such as televisions, radios, computers, etc.

• The fixture buzzes when dimmed.
  Verify dimmer switch compatibility.

Light Distribution Angle

Lighting distribution angle refers to the spread of light emitted from a light source. It is an important factor to consider when selecting a fixture or bulb, as it affects the way it will illuminate an area. There are two main types of lighting distribution angles:

• Asymmetric lighting distribution emits light evenly in all directions, creating a cone-shaped pattern that provides a pool of light. This type of lighting is ideal for general lighting and illuminating large areas. Common applications for symmetric lighting include general area illumination, security lighting, and perimeter lighting. Symmetric lighting is also used to a certain degree in up-lighting.
• An asymmetric lighting distribution angle, also known as a beam angle, creates a pattern that focuses light in a specific direction. This type of lighting is ideal for task lighting as it reduces glare and light spills in other areas. Common applications include task lighting in spaces such as landscape settings, retail stores, museums, and much more.
• It is important to note that the lighting distribution angle can also be affected by other factors such as the reflector design of the light source, the type of lens used, and the distance between the light source and the surface being illuminated.

Customer Support

Warranty Policy

• This product is covered by our industry leading 7 year warranty.
• It gets even better – scan the QR code for 2 extra years of protection!

Scan me for two eScanxtra years!

30-Day Return Policy

• At Sunco, we value our customers and stand by the quality and performance of our products.
• If you are not completely satisfied with your purchase, we accept returns within 30 days of your purchase date.

Customer Service
Our Los Angeles team of lighting experts is here to assist you with all your needs! Contact us at:

• Email: support@sunco.com.
• Call or Text: 844-334-9938

References

• P65Warnings.ca.gov

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>