KLU OLIS-K Profile Built In Skirting Board LED Lighting Instruction Manual
- June 2, 2024
- KLU
Table of Contents
OLIS-K Profile
Mounting instructions
OLIS-K Profile Built In Skirting Board LED Lighting
- OLIS-K Profile (Ref. C4195)
- OLIS-90Z End cap (Ref. C24482)
- OLIS-K-L End cap (Ref. C24480)
- OLIS-K-P End cap (Ref. C24484)
- OLIS-90W End cap (Ref. C24483)
- O5 mounting strip (Ref. 50023)
- Cover BENCO-7 (Ref. 17069)
- LED tape*
- Connector JST-BEC (Ref. 42056)
- Gland*
- The full range of accessories and electronics is available at www.KlusDesign.eu
NOTE! ! All LED tapes must be connected to a 12 V or 24 V power supply.
IMPORTANT: Not all possible mounting procedures are presented here.
More mounting procedures and related accessories can be found at
www.KlusDesign.eu.
Drawings in these instructions are simplified and only approximate the actual
shapes.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>