Liberty Pumps 404 Short Profile Drain Pump User Guide
- June 2, 2024
- Liberty Pumps
Table of Contents
Liberty Pumps 404 Short Profile Drain Pump
Features
- Factory pre-assembled, ready to install
- Fully automatic operation
- Short profile design for compact areas – only 11″ tall
- Separate access cover for easy switch inspection (QuickTree®)
- Integrally moulded rubber gasket for a superior gas-tight seal
- Standard alarm and Wi-Fi alarm models are available
Applications
- Bar sinks
- Laundry trays
- Dehumidifiers
- Utility sinks
- Grey wastewater drainage below gravity lines
Features
- Compact design for tight areas
- Factory pre-assembled
- Fully automatic operation
- QuickTree® technology allows quick inspection and removal of float switch without disconnecting the plumbing
- Integrally moulded rubber gaskets for a superior gas-tight seal
- Oil-filled, hermetically sealed motor with thermal-overload protection; 10′, 3-wire power cord with grounded plug
- Corrosion-resistant polyolefin basin with molded-in connections
- Maintenance-free, permanently lubricated sealed bearings
- 3/8″ Solids handling
- Maximum fluid temperature 104°F continuous duty, 140°F intermittent duty. Not intended for use with chemicals.
Dimensional Data
- Weight: 13 lbs
- Height: 11-1/8″
- Major Width: 13-3/4″
- Total Basin Capacity: 4.3 gallons
Performance Curve
- 60 Hz 3450 RPM
Motor Specifications
- 1/3 hp 115V 5.2A
- Oil-filled, Thermally protected
Models
Models
MODEL
| HP| VOLTS| DISCHARGE INLET & VENT| STANDARD
ALARM| Wi-Fi ALARM| CHECK VALVE INCLUDED
---|---|---|---|---|---|---
404| 1/3| 115| 1-1/2″| | |
404CV| 1/3| 115| 1-1/2″| | | X
404/A| 1/3| 115| 1-1/2″| X| |
404CV/A| 1/3| 115| 1-1/2″| X| | X
404/A-EYE| 1/3| 115| 1-1/2″| | X|
404CV/A-EYE| 1/3| 115| 1-1/2″| | X| X
404L| 1/3| 115| 2″| | |
- Alarmed models come with a factory-mounted alarm float-in system.
- No assembly is required. See alarm literature for the ALM Series standard alarm or NightEye® Wi-Fi alarm for complete alarm specifications.
- 404CV models are CSA certified to the UPC and IPC requirements of ASME A112.3.4 / CSA B45.9.
- Specifications are subject to change without notice.
- Copyright © Liberty Pumps, Inc. 2022 All rights reserved. LLIT004600-R12/22
CONTACT
- Liberty Pumps – 7000
- Apple Tree Avenue – Bergen, New York 14416
- Phone 800-543-2550
- Fax 585-494-1839
- LibertyPumps.com.
- MODEL 404 “Short Profile” Drain Pump
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>