S600 7.6MPH Folding Treadmill User Manual

User’sManual
Mode: S600

Before installing and using the machine, please read all the instructions in the manual carefully and keep the manual properly.

Important safety information

Before installing and using the treadmill, please read all the instructions in the manual carefully and keep the manual properly

• This product is indoor household equipment, please do not modify it for other uses or outdoor use; please place the treadmill in a flat and clean place, do not put it on a thick carpet or near the water position. When placed, the rear should be left 1000 *  1000mm, left and right sides of  each 500mm of space.
• This product is intended for use by adults, and minors must use it under the supervision of an adult. Persons who feel physically unwell or mentally impaired and who lack common sense in use are prohibited unless they are under the supervision or  direction of a person responsible for their safety.
• If the power cord is damaged, to avoid danger, it must be replaced by the manufacturer or a professional repairer.
• This product is for 90V-110VAC only. Please use a power outlet with safety grounding, grounding plug installation, and grounding matters must be consistent with the parameters of the user’s area of use, if the plug and outlet are not compatible, please  arrange a qualified electrician or after-sales personnel to handle.
• Please check all parts before use to ensure that the screws and nuts are locked tightly.
• To avoid clothes being hung up by the machine, please wear comfortable tight-fitting clothes when using them. Do not allow little children or pets to approach to avoid accidents.
• Keep your hands away from all moving parts, do not put your hands and feet in the gap under the running belt.
• This product is suitable for home use, not for professional training and testing, nor for medical purposes.
• The heart rate display of this product does not provide data for clinical medicine.
• This product is for one person only when it is running.
• Power off and unplug before cleaning and maintenance.
• Power off and unplug the unit when you leave.
• Please use the original parts provided by the factory, do not use private replacement.
• The product is HC class, and the maximum weight of the user is 140KG.

Warranty

We make sure that the product is made of high-quality materials.
We will be responsible for warranty in case of problems under normal use.
The warranty period is 1 year (from the date of purchase). If you purchase a product with quality problems, please contact our customer service within 12 months, and do not handle it without asking permission.
The following cases are not covered by the warranty:

• Damage caused by external causes.
• Use non-original accessories.
• Incorrect handling by yourself.
• Do not follow the instructions.

This warranty commitment is only valid for private home use, not for professional training situations such as gyms.
If you need to purchase non-warranty accessories, please contact customer service. Please provide the following information when ordering:

• Instructions
• Product model
• Part number
• Proof of date of purchase

Please do not send the product back to our company without our customer service confirmation, and our company will not be responsible for any charges if the product is sent back without permission.

Spare part list & Technical parameters

1. Model configuration
   Name| Sketch（for reference）| quantity
   ---|---|---
   Treadmill| | 1
   Remote| | 1
   Manual| | 1
   Hexagonal wrench| | 1
   Lubricant| | 1
   Security lock| | 1
   Power cord| | 1
2. Technical parameters
   product configuration| technical parameters
   ---|---
   packaging dimensions| 1450750155mm
   folded size| 1375675135mm
   Product dimensions| 12906751090mm
   running area| 1080*455mm
   Rated function| 550 W
   speed range| 0.6-7.6MPH
   Max weight capacity| 140 KG
   net/gross weight| 31.5 / 36KG

Product structure

Assembly Instructions

Assembly steps

1. 0pen the box, take out the relevant accessories and the machine and put the machine on flat ground.
2. Stand the handle upward until it can’t be pushed forward.
3. Hold the handle with one hand and push the handle lock to the OFF position with the other hand (the same operation on the left and right sides).

Folding steps

1. Hold the handle with one hand and push the handle lock forward with the other hand to the ON position (the same operation on the left and right sides).
2. Fold back the handle and make it flat.

IPAD stand assembly
Take out the IPDA bracket from the box, insert it into the handle slot as shown in the picture. Note: This machine is a dual-purpose treadmill.

1. When the handrail is upright, the speed is 0.6-7.6mph, as shown in the figure;
2. When the handrail is folded, the speed is 0.6-4.0mph. As shown in the figure;

Operation & Function Instructions

Screen display

Remote

Detail Instructions

Function

1. Key:Start/stop, speed +/-.
2. Speed: 0.6-7.6mile, calorie: 0001-9999KCAL, time:01:00-99:00 minutes, distance: 0.01-99mile.
3. The display switches function menus (time, speed, distance, calories) every 3 seconds when running the machine.
4. Automatic shutdown when running to 99.00 minutes.
5. After 5 minutes of the shutdown without operation, the display will go into hibernation and the screen will be off.

Start-up instructions
Plug in the wire cord, and turn on the power switch, the machine will quickly enter the standby state; press the keyboard or remote control start button, and the machine will start running at a speed of 0.6mph.
Speed instructions
With each press of the keyboard or remote control speed + button, the speed will increase by 0.2mph; with a long press the speed “+”, and will continue to increase at a speed of 0.2mph.
With each press of the keyboard or remote control speed “-“, the speed will decrease by 0.2mph; with a long press the speed “-“, will continuously decrease at a speed of 0.6mph.
The speed can only be adjusted to 4.0mph with the remote control, the speed above 4.0mph needs to be adjusted by pressing the keyboards.
Note: The display shows the speed data when controlling the speed, if the speed is not adjusted within 3 seconds, the display will switch the function menu (time, speed, distance, calorie) every 3 seconds in a cycle.
Stopping instructions

1. In running state, press the stop button on the keyboard or remote control, and the machine will stop running slowly.
2. In running state, pull out the red security lock, and the machine will stop running slowly.

Bluetooth connection operation
Turn on the Bluetooth, and search Bluetooth name from TTAP00001 to TTAP65000. For example: search for “TTAP00008”, then click it. Then enter the password “0000” to connect. Successfully connected.
Note: After successfully connecting to Bluetooth for the first time, it will automatically connect to Bluetooth the next time.
Bluetooth disconnection
Find your connected Bluetooth name, then click “disconnect”.

Warm-up exercises

Before running, it is better for you to do some stretching exercises. A successful exercise program should include warm-up, aerobic, and soothing exercises. We advise that you exercise at least two to three times a week. In the beginning, you can exercise one day  and rest one day. After a few months, you can increase the amount of exercise to four to five days a week.
Warming up is a very important part of your fithess exercise. Moderate warming up can prepare your body for the next more intense exercise because warming up can help muscles stretch, improves blood circulation, and increases pulse rate, sending more  oxygen to the muscles. After aerobic exercise, repeated warm-up exercises can also reduce muscle soreness. We recommend the following warm-up and cool-down exercises.

1. Stretch downward
   Bend your knees slightly, bend your body forward slowly, Let your back and shoulders relax, and try to touch your toes with your hands.
   Hold for 10-15 seconds, then relax. Repeat 3 times.
   As in Figure 1

2. Hamstring stretch
   Sit on a clean seat cushion and straighten one leg.
   Tuck the other leg inward so that it is close to the straightened leg’s inside. Try to touch your toes with your hands. Hold for 10 to 15 seconds.
   then relax. Repeat 3 times for each leg.
   As in Figure 2

3. Calf and Achilles tendon stretch
   Body forward, put your hands against the wall.
   Left leg forward in a lunge.
   Straighten the right leg and plant the left leg on the ground; Then bend the left leg, hold for 10-15 seconds, then relax.
   Repeat for each leg 3 times. As in Figure 3

4. Head exercise
   Tilt your head to the right side and feel the left stretching of the neck muscles; then turn your head to the back then turn your head to the left; finally drop your head to your chest.
   Then relax and repeat 3 times.
   As in Figure 4

5. Waist exercise
   Stretch your arms to the left and right sides and slowly, then raise them above your head.
   Hold your right arm as straight as possible toward the ceiling.
   Straighten it out and hold it for 1 second, feeling the stretch on your right side.
   Repeat the same exercise with your left arm.
   As in Figure 5

Maintenance Guidelines

Warning: Before maintaining the product, please be sure to unplug the power plug of the walking machine.

• Use a cloth to clean the surface of the machine.
• A thorough cleaning will extend the life of the machine.
• Regularly remove dust to keep the parts clean, and sweep the exposed parts of the running belt on both sides, this will reduce the accumulation of impurities on the running belt. Keep your sneakers clean to avoid carrying foreign objects under the running belt, which will wear the running board and running belt.
• The surface of the running belt must be wiped with a damp, soapy cloth, taking care not to splash water on the electrical components and under the running belt.
• Inspect and lock all treadmill parts frequently, replace those that are defective, or set them aside until repaired.

1. Adjust the running belt
   If the running belt slips or is not smooth when you are using the treadmill, you can adjust the tightness of the running belt to improve it.
   Adjustment running has two functions: elasticity adjustment and running belt center position adjustment.
   The running belt has been well adjusted at the factory, but after several time-use, it will be stretched and will deviate from the center position causing the running belt to rub the pedal side strip and be rubbed by the rear cover. It is normal for the running belt to be stretched in the process of use.
   It is normal for the running belt to have a lateral deviation of no more than 5mm when non-load.
   How to adjust the running belt (the picture is for reference only, please subject to the actual object)
   ◆ The running belt deviates to the left How to adjust: Power off the machine first, take a 5mm hexagonal wrench, rotate the bolt inside the left rear cover to the right 1/4 turn to tighten the running belt, then power on and run the machine to wait for the running belt to move to the center. Follow this method until the running belt is adjusted to the center.
   ◆ The running belt deviates to the right How to adjust: Power off the machine first, take a 5mm hexagonal wrench, rotate the bolt inside the right rear cover to the right 1/4 turn to tighten the running belt, then power on and run the machine to wait for the running belt to move to the center. Follow this method until the running belt is adjusted to the center.
   ◆ The running belt will become loose after using it for a period of time, if the running belt is too loose, the running belt will slip when you run.How to adjust: Power off the machine first, take a 5mm hexagonal wrench, rotate the bolt inside the both left and right rear cover to the right 1/4 turn to tighten the running belt, then power on and run the machine to wait for the running belt to move to the center. Follow this method until the running belt is adjusted to the center.
   Note: Because the force of the two feet is not the same when running, the pressure on the running belt is unbalanced, causing the running belt to deviate from the center. This deviation is normal and the belt will return to the center when non-load in the running status. The running belt cannot be adjusted too tight. This will pull the running belt, increase the pressure on the front/rear rollers, cause damage to roller bearings, etc., and cause abnormal noise or other problems.

2. Add lubricant
   The machine is lubricated before leaving the factory. As the frequency of use increases, the running board will gradually dry out, and the friction between the running belt and the running board will increase, which may wear the running board and the running belt. Proper lubrication will help keep the treadmill in top condition. We advise you to lubricate your treadmill every 30 hours of use.

Note: Please use treadmill lubricants or contact our company directly.
How to add lubricant to the treadmill

• Power off and unplug the power cord. The lubricating place is located below the running belt (As shown below);
• Cut a small slit in the bottle;
• Lift the running belt, pour the lubricant into the middle of the running board, and put down the running belt;
• Plug in the power cord and turn on the power switch. Wait a minute to let it lubricate the board&belt before using the treadmill.

Note: Please pay attention to your safety when lubricating.

Error codes

the wire between the screen and the upper controller is in poor connection.
2. The main IC of the controller is in poor connection, please unplug the cable and plug it in again.
3. The controller has a problem, replace the controller.
E02| Anti-blast protection| 1. Check if the motor is in open circuit or in bad connection,please replace the motor or check the connecting terminals.
2. Power tube or controller is damage, replace the controller or the controller.
E05| Over current protection| 1. Overload.
2. The treadmill needs to be lubricated.
3. The motor is damaged, replace it.
E06| Overload protection
E10| Keyboard and panel control connection failure| 1. Check if the connection between the keyboard and the controller is poorly connected.
2. The controller plug is not in good connection, please re-plug it.
3. The controller power supply is abnormal, please replace the controller.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>