global sources TB-2035 Manicure and Pedicure Nail Set Instruction Manual
- June 4, 2024
- global sources
Table of Contents
global sources TB-2035 Manicure and Pedicure Nail Set
Safety Instructions
- Important Notice: This manual is available in two languages: English and Simplified Chinese. If any dispute or confusion arises caused by the translation, the English version shall prevail.
- To ensure proper operation of this device, please read this instruction manual carefully before using the device and keep it for further reference.
Warning
- The following persons should not use this device: children; persons with skin inflammation in the fingers or toes; persons with allergies; persons with reduced physical, sensory, or mental capabilities.
- Please verify the device before you start using it. Do not use this device if you detect any damage or malfunction to prevent injury.
- Immediately discontinue use if you detect any malfunction or abnormality while using this device.
- Do not attempt to modify, disassemble, or repair the device by yourself (except detachable parts) to prevent accidents.
- Use this device for its intended purpose only and as directed in this instruction manual. Do not use this device for any other purpose than nail care.
- Do not leave the device in a humid or hot place.
Caution
- Do not share the same device with others.
- Regularly clean the device and the accessories to extend its lifetime.
- Keep the device out of reach of children.
- If you do not intend to use the device for an extended period of time, remove the battery.
Device Specifications
- Name: Manicure/Pedicure Nail Set
- Model No.: TB-2035
- Power: 1.5V /0.5W
- Type of Battery: AAA 1.5V x 1 (Not Included)
- Executive Standard: Q/XMMJ1006-2020
Device Description
- Felt Cone Head
- White Filing Head
- Emery Grinding Head
- ON/OFF Switch
- Protective Cap
- Battery Compartment Cover
How to Use the Device
To ensure the correct operation of this device, please read the instructions carefully before use.
-
Inserting the Battery
Make sure the device is switched off before you install the battery. Use both hands to remove the battery compartment cover. Hold the upper part of the device with one hand, with the other hand hold the battery compartment cover, and pull firmly to remove it (do not slide the on/off switch accidentally during this process). Insert one AAA battery according to the correct polarity (positive and negative), as indicated in the battery compartment. (Picture 2) -
Choose the attachment according to your needs and push it firmly into the connection shaft until it’s securely in place.
Emery Grinding Head: Use the emery grinding head to remove dead skin on the sides of natural nails and to buff the edge of the nails. (Picture 3). White Filing Head: Use the head attachment to polish the edge of acrylic nails and the surface of natural nails. This will make the connection between the nail polish and the nail surface smoother. (Picture 4)
Felt Cone Head: This attachment polishes the nails leaving a glossy and smooth surface.(Picture 5). -
After installing the head attachment, push the sliding on/off switch upwards to ON to switch the device on. (Picture 6)
-
After use, push the sliding on/off switch downwards to switch the device off. The device has an internal storage area for the attachments. Store the attachments in the storage area after use. (Picture 7)
Cleaning & Maintenance
- Make sure the device is turn off before you start cleaning.
- Do not immerse the device in water. You can clean the attachment heads separately.
- Clean the device surface with a clean slightly wet cloth.
- Never use lubricants, detergents, polishing agents, or air fresheners on this device.
Storage
Do not leave the device in a wet or humid place. If you do not intend to use the device for an extended period of time, remove the battery and store the device properly.
Recycling
Batteries may contain substances harmful to the environment. Before disposing of this device, remove the battery. Do not dispose of this device and battery together with the domestic waste. Instead, hand them over to an official recycling point to contribute to environmental protection.
Warranty & Support
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Abnormal noise. | The head attachment is installed incorrectly. | Install the |
head attachment correctly as guided.
The device is not working| The battery is low.| Replace the battery.
normally.| The battery is out of power.|
---|---|---
The battery is installed incorrectly.| Remove the battery and install it
correctly as guided.
Other problems.| | Consult your local dealer.
Note: If the device still does not work properly after using the above
solutions, please stop using the device and contact your local dealer.
After-Sales Service
Please visit our website www.touchbeauty.com or contact our customer service team at [email protected] if you need to learn about our products or if you need any information. You can also contact an affiliate dealer in your country.
MANUFACTURER: TOUCHBEAUTY BEAUTY & HEALTH (SHENZHEN) CO., LTD
ADDRESS: 601 & 602, Block F5, TCL International E-City, 1001 Zhongshanyuan
Road, Shuguang Community, Xili Subdistrict, Nanshan District, Shenzhen, China.