savaria 001077-EN Ceiling Lift Free Standing Support Owner’s Manual
- June 2, 2024
- savaria
Table of Contents
savaria 001077-EN Ceiling Lift Free Standing Support
Product Information
Specifications:
- Product: Savaria Ceiling Lift Free Standing Support
- Part Number: 001077-EN
- Legal Manufacturer: Savaria Concord Lifts, Inc. (Canada)
- European Representative: Advena Ltd. (Malta)
- UK Authorized Representative: Advena Ltd (UK)
- Copyright: 2022 Savaria Concord Lifts, Inc.
Product Usage Instructions
Important Safety Information:
Before using the Free Standing Support (FSS), it is crucial to read the entire manual to ensure the safety of both the person being transferred and the operator. This manual contains essential safety information to prevent injuries during transfers.
Unauthorized Modifications:
Any unauthorized modifications to the FSS may compromise its safety. Always use Savaria replacement parts to avoid potential injuries due to inadequate parts.
Maintenance:
Regularly scheduled maintenance by an Authorized Savaria Dealer is necessary to ensure the safety and proper operation of the lift. Refer to the Maintenance section in the manual for detailed instructions.
Incident Reporting:
In case of a serious incident related to the device, it should be reported to the manufacturer or distributor. Additionally, incidents should be reported to the competent authority in the European community.
Legal Information:
The legal manufacturer of the product is Savaria Concord Lifts, Inc. based in Canada. European representation is handled by Advena Ltd. in Malta and the UK Authorized Representative is also Advena Ltd.
FAQ
- Q: What should I do if I encounter a serious incident with the device?
- A: In case of a serious incident, report it to the manufacturer or distributor immediately.
- Q: Can I use non-Savaria replacement parts for maintenance?
- A: To avoid potential injuries, always use only Savaria replacement parts for maintenance.
IMPORTANT
Be sure to read this entire manual before using the Free Standing Support (FSS). The information in this manual is important for the safety of the person being transferred and the operator, and for the proper use and maintenance of the FSS. Transfer always presents a potential risk and this manual provides important safety information that must be read and understood to help prevent injuries. Unauthorized modifications to this FSS may affect its safety. Savaria Concord Lifts, Inc. will NOT be held responsible for any accidents, incidents or performance deficiencies that occur due to any unauthorized modification to this FSS. To avoid potential injury due to the use of inadequate parts, always use only Savaria replacement parts. Regularly scheduled maintenance must be performed on your FSS by an Authorized Savaria Dealer to ensure the safety and proper operation of the lift. Refer to the Maintenance section in this manual. If a serious incident occurs in relation to the device should be reported to the manufacturer or distributor of the device. In the European community, the incident shall be reported as well to the competent authority of the Member State in which the user and/or patient is established.
Legal Manufacturer:
Savaria Concord Lifts, Inc. 2 Walker Drive Brampton, Ontario L6T 5E1 Canada
European Representative:
Advena Ltd. Tower Business Center, 2nd Flr., Tower Street, Swatar, BKR 4013 Malta UK Authorized Representative: Advena Ltd, Pure Offices, Plato Close, Warwick. CV34 6WE UK Copyright 2022 Savaria Concord Lifts, Inc. All rights reserved.
STANDARD NOTATIONS
The following notations may be used throughout this manual to emphasize important safety information, mechanical concerns, and other important information. Please review and follow all of these messages.
- DANGER
- Danger messages indicate an imminently hazardous situation, which, if not avoided, results in death or serious injury. All danger messages feature a standard ISO safety alert symbol followed by the signal word DANGER in capitalized black lettering on a red background
- WARNING
- Warning messages indicate a potentially hazardous situation, which, if not avoided, could result in death or serious injury. All warning messages feature a standard ISO safety alert symbol followed by the signal word WARNING in capitalized black lettering on a dark yellow background.
- CAUTION
- Caution messages indicate a potentially hazardous situation, which, if not avoided, could result in minor injuries. All caution messages feature a standard ISO safety alert symbol followed by the signal word CAUTION in capitalized black lettering on a yellow background
- NOTE
- Note messages provide information, such as reminders, general information about a previous statement, or additional guidelines that do not fit into the flow of the preceding text. All note messages include the signal word NOTE in capitalized white lettering on a blue background.
OVERVIEW
Intended Use
Free Standing Support (FSS) is designed for use by caregivers and health care professionals to lift and transfer a person in a homecare, assisted-living or hospital environment. Transfer must be performed by a qualified operator as described in this manual. Do NOT use the FSS for any other purpose. Product Life The FSS is designed for a useful life of 10 years after which time it must be replaced. To ensure this life span, you must perform the preventive maintenance as specified in the Maintenance section in this manual.
Warning
Savaria Concord Lifts, Inc. cannot ensure complete safety for a FSS that has exceeded its useful life. Wear may cause failure or a part and lead to a patient fall.
Using This Manual
To ensure safe operation of the FSS, read this entire manual carefully, especially the Safety Instructions, before installing, using or maintaining the FSS. Failure to comply with all WARNINGS in this manual may result in injury. If there is anything you don’t understand, contact your Authorized Savaria Dealer for further details. Keep this manual with the FSS and ensure all operators are fully trained in the use of the lift with the FSS as described in this manual.
SAFETY INSTRUCTIONS
Keep these Safety Instructions with the FSS at all times. Read this entire manual before installing, using or maintaining the FSS.
Warning
- Do NOT use the FSS for any purpose other than to transfer a person. To ensure safety of the person being transferred and the operator, follow all Safety Instructions.
- Do NOT push, bump or smash the rail or posts to avoid flipping the FSS or damaging components. Any damage to the structure could result an injury or death.
To Ensure Safety
- • The FSS has a safe working load of 272 kg (600 lb), 200 kg (440 lb) or 130 kg (286 lb).Do NOT exceed this load. Refer to the span chart tag on the legs of the FSS or to the Specifications section in this manual for the maximum load allowed.
• The FSS must be installed by an Authorized Savaria Dealer.
• Ensure the FSS is used only with a Savaria ceiling track and ceiling lift.
• The FSS must be installed by a trained and Authorized Savaria Dealer. We recommend 2 persons to avoid any injury or damages to the ceiling if height is 98” (249 cm) or less.
• Check with a qualified health professional to ensure the person to be transferred has been deemed suitable for transfer.
• Take extra care with a person who is connected to electrodes, catheters or other medical devices to ensure safe transfer.
• Take care to avoid impact during transfer.
• Keep all components of the FSS clean and dry.
• Ensure all checks and actions are performed at the frequency indicated in the Maintenance section in this manual.
• Do NOT use as a swing seat.
DESCRIPTION
Installation
The FSS kit includes the items shown below.
- Install the posts in the bases (x2). Note that the posts will have to be inserted into the bases sideways (laying down on the floor) if the ceiling height is less than 96.25” (245 cm) as shown in Figure 3
- Tighten the screws (x8) to a torque of 20 N-m, +/-3 (15 lb-ft).
- Install the upper rail attachment assembly (x2). Note that the upper rail attachment assemblies will have to be installed with the posts tilted sideways slightly if the ceiling height is less than 97.5” (248 cm) as shown in Figure 6.
- Tighten the screws (x8) to a torque of 20 N-m, +/-3 (15 lb-ft).
- Insert the trolley (x1, ordered separately) and the end stoppers (x2).
- Install the upper rail. Note that it must be installed flush with the outside of the post bracket. You may need a second person to help if the ceiling height is 96” to 98” (244 cm to 249 cm) as a precaution to avoid damaging the ceiling (see Figure 10).
- Tighten the screws (x4) to a torque of 20 N-m, +/-3 (15 lb-ft).
- Tighten the screws (x4) to a torque of 20 N-m, +/-3 (15 lb-ft).
- Install the end caps (x2).
- Install the PVC strips (x4).
- Adjust for level. Ensure there are no gaps over 1/4” (6 mm) to prevent children from trapping their fingers.
- Optional – Use anchor bolts to attach the bases (x2) to the floor
Symbols
The following chart illustrates the symbols used on the nameplate, the
packaging and the lift.
Dimensions
FSS SD Dimensions
FSS MD Dimensions
FSS HD Dimensions
MAINTENANCE
The FSS is subject to wear and tear from use. You must perform the checks and actions in the following tables ensure safety and proper operation. Contact your Authorized Savaria Dealer to perform the Dealer Checks/Actions. Safety- related maintenance and service must be performed by an Authorized Savaria Dealer. This maintenance schedule provides the minimum recommendations. In some cases, more frequent checks may be required per local regulations and codes. To ensure safety of the person being transferred and the operator, do NOT use the equipment if a fault is found or if these regular checks have not been performed.
Operator Maintenance Schedule
Perform the following checks/actions as indicated. If any of the checks fail, contact your Authorized Savaria Dealer for service or replacement of parts.
| Operator Check/Action | Frequency |
|---|---|
| Check the track and hardware for any damage | Before every use |
| Ensure the track end stops are securely in place | Before every use |
| Clean the track | Every 4 months |
| Check for any loose hardware and tighten as needed | Every 4 months |
| Check the track, hardware, and trolley wheels for damage | Every year |
Dealer Maintenance Schedule
Perform the checks/actions listed in the Operator Maintenance Schedule as well as those listed in the table below.
| Dealer Check/Action | Frequency |
|---|---|
| Perform a load test on the FSS with the Safe Working Load | Every year |
| Check for any loose hardware and tighten as needed | Every year |
DANGER
To avoid potential injury, use only Savaria parts when replacing parts. To prevent the person from falling (or objects from falling) that may cause injuries to the person, the operator or other persons, always reinstall the track end stops if they were removed for servicing. Note that the recommended tightening torque is 20 N-m (15 lb-ft).
Inspection and Cleaning
- To clean the FSS, wipe down the structure with a damp cloth using warm water and a cleaner. You can also use wipes that have a 70% v/v solution of isopropyl alcohol.
- Do not use phenol, chlorine or any other type of solvent that may damage the finish.
- Rub the FSS vigorously with the cloth or wipe to ensure thorough cleaning of the entire surface. Dry all surfaces with a soft cloth.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>