current R24 52 Watt Reef Aquarium Light Mini User Guide

R24 52 Watt Reef Aquarium Light Mini
User Guide

WHAT’S INCLUDED

Each Orbit REEF LED includes:

Item| Description| Quantity
A| Orbit REEF LED Light Fixture| 1
B| 12V DC Power Supply, UL® Listed| 1
C| Cable Wraps| 2
D| Extension Cable| 1
Each Mini LOOP BT Controller includes:
F| LOOP Mini Controller w/Bluetooth| 1
G| Temperature Sensor| 1
H| 3M Adhesive| 1
J| Mounting Bracket| 1
K| Wood Screws| 2

Note:
If your Orbit REEF LED is missing any components, please contact us directly at www.current-usa.com.
DO NOT RETURN TO THE RETAILER

INSTALLATION

1. UNPACK
   Remove all items from the packaging.

2. **MOUNT LIGHT*
   This light MUST be used with a mounting option (SOLD SEPARATELY).
   Mount LED light to either:
   1. Flex Arm Tank Mount
   2. Flex Arm Stand Mount
   3. Hanging Kit
   4. Swivel Bracket
   Use the instructions included with each mounting method to install the selected mounting option to your LED light.

3. MOUNT CONTROLLER Find additional instructions and support at www.current-usa.com

4. CONNECT
   1. Connect included Extension Cable to REEF LED Light.
   2. Connect the REEF LED light to the Mini Bluetooth controller by gently pushing the LED cable into the top 3-pin connector and tightening it.
   3. Place the temperature sensor into the sump or aquarium and attach using a suction cup.
   4. Connect the Temperature sensor to the Temperature USB port located on the bottom of the controller.
   5. Slide the Mini Bluetooth controller into the controller mount.
   6. Plug the 12V DC power supply into a GFCI outlet, ensuring a drip loop.
   7. Connect the power supply plug to the controller, the controller key ring will BLUE indicating power is now ON.

5. CLEAN UP
   • Use cable wraps to organize excess cords, and clean and maintain light every 30 days.
   • Regularly examine light fixtures and components. Remove from service if any salt creeps, water, or damage is found.
   • Do not lay objects on top of the light, controller, or power supply. Do not stack power supplies.
   • Unplug the lighting system from the GFCI power outlet when cleaning to prevent any electrical shock hazards.
   • Regularly clean fan and heat sink fins using a can of compressed air.
   • Wipe the system with a damp cloth. DO NOT use ammonia-based cleaners.
   • ALWAYS ensure the power supply is plugged into a GFCI outlet using a drip loop.
   • This light is not waterproof. Do not submerse or mount close to water.

CONTROLLER OPERATION AND FEATURES

The controller Key Ring displays the status of the controller. There are status 4 indicators:

10 min.)
WHITE| Indicates the controller is in manual ON (Daylight setting) mode. Press the Key for 3 seconds, LED light will turn ON to the Daylight setting. Press an again for 3 seconds to resume app settings (Bluetooth.)
GREEN| The LOCK feature locks the controller settings and prevents other mobile devices from connecting to the controller. Press and hold the Key for 6 sec. to lock settings. Press and hold for 6 sec. to unlock.
RED| Voltage issue. Ensure ONLY 12VDC power is connected.

MOBILE DEVICE CONNECTION

IMPORTANT! The LOOP APP does NOT require a PIN code for Bluetooth connection. Please use the connecting instructions below.

1. Download the latest version of the LOOP app:
   |
   ---|---

https://itunes.apple.com/us/app/current-usa-loop/id1242605170

|

http://qrs.ly/g469kxa

2. From your phone’s Settings screen, search for Bluetooth and make sure it is turned on by moving the slider button to the right (please do not try to connect LOOP through this setting*.)
   

   3. Open the LOOP App.| 4. Press Add Device.| 5. Select LOOP
   
   6. Select LOOP| 7. Rename system| 8. Back to HOME

The *LOOP app does NOT require a PIN code or use the built-in Bluetooth pairing in your mobile device – the app itself will connect with your device using its own software.
For connection tips and troubleshooting, go to www.current- usa.com/app

Programming LED Lights

The Home screen provides an overview of your aquarium system, including daily light cycle, weather, water temperature, wireless connection status, on-demand effects, and access to programming features.

| Custom Color| 24/7
Feed Mode| 10 min.
Clean Mode| 10 min.
Fading Moonlight| 30 min.
Moonlight| 30 min.
Rolling Clouds| 30 min.
Random Clouds| 30 min.
Lightning Storm| 30 min.
Full Storm| 30 min.
Approaching Storm| 30 min.
Moon Rays| 30 min.
Sun Rays| 30 min.
Partly Cloudy| 30 min.

The LOOP Marine controller features a pre-programmed 24-hour lighting cycle to mimic nature.

To access lighting and pump programming, tap PROGRAM

Default Light Settings (Pre-programmed)
Sunrise ON Time: 7:00 am
Sunrise Color Spectrum: B 50%, W 25%, R 45%, G 10%
Daylight Color Spectrum: B 90%, W 75%, R 85%, G 30%
Sunset OFF Time: 5:00 pm
Sunset Color Spectrum: B 75%, W 25%, R 65%, G 0%
Moonlight Duration: 2 Hours
Moonlight Color Spectrum: B 10%, W 0%, R 5%, G 0%
Weather Forecast: OFF
Custom Color Spectrum: B 50%, W 50%, R 50%, G 50%

To program Sunrise:

1. Use the toggle to manually turn lights On / Off.

2. Tap Sunrise.

3. Use scroll to select Sunrise ON time.

4. Use sliders to adjust the color spectrum.

5. Tap to go back, or select another program at the bottom. To program Daylight:

6. Tap Daylight.

7. Use sliders to adjust the color spectrum, or select a base color at the bottom.

8. Tap to go back, or select another program at the bottom. Color Spectrum Tips:
   Daylight
   For healthy coral growth and color, keep a Blue high (90%+), White a bit lower (75%+). Sunrise/Sunset
   To enhance colors in fish & coral, turn White low (<20%), Blue at 50-75%), and Red higher (65%+). Moonlight
   Turn White, Red, and Green off (0%) and keep Blue low (10%). To program Sunset:

9. Tap Sunset.

10. Use scroll to select Sunset OFF time.

11. Use sliders to adjust the color spectrum.

12. Tap to go back or select another program at the bottom. To program Moonlight:

13. Tap Moonlight

14. Use scroll to select Moonlight duration.

15. Use sliders to adjust the color spectrum.

16. You can also choose an active moonlight program featuring audio.

17. Tap to goes back or selects another program at the bottom.

To program Custom Color:

1. Tap Custom Color.
2. Use sliders to adjust the color spectrum.
3. You can also choose an optional base color, then adjust the spectrum.
4. Tap to go back to the light programming screen.

To program Weather:

1. Tap Weather Forecast.
2. Use the toggle to manually turn the weather On/Off.
3. Use scroll to select weather mode.
4. Use the right scroll to select % mode to run during Daylight mode.
5. Tap to go back, or select another program at the bottom.

Once programming is complete, be sure to return to the Home screen and press the RESUME TIMER to begin running your lighting program.

Programming Wave Pumps

To program Wave Pumps:

1. Tap Pumps at top of the programming screen.
2. Use the toggle to manually turn all Wave Pump On / Off.

To program Wave Pump 1:

1. Tap Wave Pump 1.7. Tap to go back, or select another pump at the bottom.

To program Wave Pump 2:

1. Tap Wave Pump 2.8. Tap to go back, or select another pump at the bottom.

To program Wave Pump 3:

1. Tap Wave Pump 3.5. Tap to go back, or select another pump at the bottom.

Wave & Flow Pump Tips: 

Wave / Pulse Mode
This mode simulates a thriving reef environment. Wave pumps change speed frequently, simulating waves or surging water currents. Great for mixed reef aquariums.
Stream Mode
This is the default flow mode, pumps create a steady stream of water flow.
Night Mode
Turning on Night Mode will reduce water flow in wave pumps by 30% during the moonlight setting. (Note: Not recommended when regular flow setting is <50%).
Feed Mode
Temporarily shuts wave pumps off and reduces flow pump flow for 10 minutes, allowing fish and corals to feed. Pumps ramp then ramp up to normal speed.
( Note: if using a sump protein skimmer that is water level dependent, we recommend turning this mode OFF to ensure your skimmer does not overflow.)

Programming Flow Pumps
Note: Follow LOOP controller instructions to ensure DC Flow pumps are properly connected and manifold connection Hubs are compatible.

Use the toggle to turn all flow pumps On/Off.

To program Flow Pump 1 or 2:

1. Tap Flow Pump 1 or Flow Pump 2. 5. Tap to go back or select another pump at the bottom.

Temperature & Settings Reset

Temperature is currently set up as a visual indication only. When the temperature is within your safe settings, it will be displayed in Green on the Home screen. When out of range, it will be displayed in Red.
To setup Temperature:

1. Tap the Settings icon.
2. Tap Temperature.
3. Use the toggle to select degrees F or C.
4. Tap Minimum Temperature (down arrow) and select the lowest temperature your aquarium water should safely reach.
5. Tap Maximum Temperature (down arrow) and select the highest temperature your aquarium water should safely reach.
6. Tap to go back or selects another pump at the bottom.

To reset app settings to factory default:

1. Tap the Settings icon. 4. Go to lighting and pump programs, and factory resets will take effect.

Additional Info:

SAFETY WARNINGS / DISCLAIMERS

This is NOT a page of legalese. It contains important safety information that you should read and save for future reference. Remember you can always quickly access instructions for all our products at www.current- usa.com.

• Never attempt repairs yourself; return the appliance to an authorized service facility for service or discard the appliance.
• Carefully examine the fixture after installation and BEFORE you plug it into the GFCI wall outlet. Be sure there is no water on any part of the light fixture or the timer.
• Never plug in a wet cord. If a plugged-in unit or socket does get wet, DON’T touch it. Instead, promptly disconnect the fuse or circuit breaker that supplies power to the fixture. Then, you may unplug the fixture and examine for the presence of water.
• Never operate a fixture that is damaged or malfunctioning, discontinue use immediately, and return the appliance to an authorized service facility.
• Close supervision is necessary when any appliance is used by or near children.
• Always unplug the fixture when not in use, before putting on or taking off parts, and before cleaning. Never pull the cord to unplug from the GFCI.
• Do not use the fixture for anything other than for intended use. The use of attachments not recommended or sold by the fixture manufacturer may cause an unsafe condition and will void your warranty.
• Do not install or store the fixture where it will be exposed to the weather or to temperatures below 0° Celsius or 32° Fahrenheit.
• Do not operate at temperatures above 50° Celsius or 122° Fahrenheit.
• Ensure the fixture is securely installed before supplying power to the unit.
• Read and observe all the important notices and warnings on the fixture and power cord. DO NOT REMOVE THE WARNING LABEL.
• If an extension cord is necessary, a cord with a rating of at least 15 amperes should be used. A cord rated for fewer amperes or watts than the fixture rating may overheat. Care should be taken to arrange the cord so that it will not be tripped over or pulled.
• Do not look directly into the LEDs.
• This product MUST be powered by a UL or ETL-listed power supply.
• To avoid possible electric shock, the power supply MUST be plugged into a GFCI wall outlet installed by a certified electrician in accordance with all local codes. All products must have a drip loop.

Important Warnings/Drip Loops
Drip Loops should always be used to help prevent water from traveling along the cord and coming into contact with an electrical outlet. Drip loops must always be below the level of the outlet.

Register your product and find additional support at www.current- usa.com
SAVE THESE INSTRUCTIONS

WARRANTY

This product MUST be purchased from an authorized Current-USA reseller. Visit our website for a list of unauthorized resellers. Current USA, Inc. warrants this product against defects in materials and workmanship for ONE (1) YEAR from the date of original retail purchase and is non-transferable. Warranty on all Products, including Aquariums, is limited to replacement of the product and does not cover fish loss, personal injury, property loss, or direct, incidental, or consequential damage arising from the use of this product.
Note: Current-USA, Inc. One-Year Limited Warranty does not cover damage caused by the following: improper installation, saltwater corrosion, electrical surges, or modifications.
If you discover a defect, please see your retail store or point of purchase. Current USA, Inc. will, at its option, repair or replace the product at no charge to you, provided you return it during the warranty period. A copy of the bill of sale is required as proof of the original purchase date in the event the product needs repairs within the warranty period. Please see your dealer for return options and warranty replacement parts. This warranty applies only to products by or for Current USA, Inc. that can be identified by the trade name, or logo affixed to them. Current-USA, Inc. does not warrant any products that are not Current-USA, Inc.
This warranty does not apply if the product has been damaged by accident, abuse, misuse, or misapplication or if the product has been modified without the written permission of Current-USA, Inc.; or if any Current-USA, Inc. logos have been removed or defaced.
THE WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHERS, WHETHER ORAL OR WRITTEN, EXPRESSED OR IMPLIED CURRENT USA, INC. SPECIFICALLY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO LOST PROFITS, DOWNTIME, GOODWILL, DAMAGE TO OR REPLACEMENT OF EQUIPMENT AND PROPERTY, AND ANY COSTS OF RECOVERING ANIMALS, PLANTS, TANKS OR OTHER AQUARIUM RELATED ITEMS AND/ OR EQUIPMENT. CURRENT USA, INC. IS NOT RESPONSIBLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF WARRANTY, REPLACEMENT OF EQUIPMENT OR PROPERTY, OR ANY COSTS OF RECOVERING OR REPRODUCING ANY EQUIPMENT, ANIMALS, OR PLANTS USED OR GROWN WITH CURRENT USA, INC. PRODUCTS. Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages or exclusions of implied warranties, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from jurisdiction to jurisdiction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>