Pulmodyne 9014W Full BiTrac Face Mask User Guide
- June 2, 2024
- Pulmodyne
Table of Contents
Pulmodyne 9014W Full BiTrac Face Mask
NIV masks fitting guide
BiTrac full face mask
Why choose a BiTrac NIV mask for your patients?
- Comfortable and easy fit thanks to the silicone cushion¹
- Reduced risk of cross-contamination due to single patient use
- Different sizes for a simple mask-fitting process
- For adult and pediatric patients
1 Sadeghi S. et al. Canadian Respiratory Journal Volume 2017.
- Step 1: Use the sizing guide to select the correct mask size.
- Step 2: Hold the head strap in front of the mask and position the bottom of the mask underneath the bottom lip.
- Step 3: Flip the head strap over the patient’s head and place the mask on the patient’s face. Make sure the cushion is resting underneath the lower lip and on the bridge of the nose.
- Step 4: Attach the bottom clips on the head strap to the mask. This should make an audible clicking sound.
- Step 5: Adjust the top straps to fit. Do not overtighten the head straps.
- Step 6: Once the top straps are secured, adjust the bottom velcro straps.
Follow these steps again if the mask has been removed or when refitting the mask.
Instructions
NIV masks fitting guide.
BiTrac MaxShield mask
- Step 1: Use the sizing guide before selecting a mask. The mask should fit above the eyebrows and underneath the bottom lip.
- Step 2 : Unwrap the mask from the packaging. Hold the head strap in front of the mask and position the bottom of the mask underneath the bottom lip.
- Step 3: Flip the head strap over the patient’s head and place the mask on the patient’s face. Make sure the cushion is resting underneath the lower lip and above the eyebrows.
- Step 4: Adjust the head strap on the crown of patient’s head while holding the mask in place.
- Step 5: Attach the two bottom clips on the head strap to the mask. This should make an audible clicking sound.
- Step 6: Adjust the top straps to fit. Do not overtighten the head straps.
- Step 7: Once the top straps are secured, adjust the bottom velcro straps.
- Step 8: Follow these steps again if the mask has been removed or when refitting the mask.
The products shown here are not available for purchase by the general public. The information provided here is intended for healthcare professionals only. Always read the labels and follow the product’s instructions for use. Specifications are subject to change without notice. Some features are options. Not all features are available in all markets. All images are used for illustrative purposes only and may not accurately represent the product or its use. For all proprietary trademarks (®) and third-party trademarks used by Hamilton Medical AG see www.hamilton-medical.com/trademarks. ©2022 Hamilton Medical AG. All rights reserved.