HYPER CMI002 Cloud Mini Wireless Gaming Headset User Guide

HYPER CMI002 Cloud Mini Wireless Gaming Headset

Product Information

Specifications

• Product Name: HyperX Cloud Mini Wireless Gaming Headset
• Charging Time: Approximately 2.5 hours for full charge
• Connectivity: Bluetooth and 3.5mm headset jack
• Microphone: Tuck-away boom microphone
• Charging Port: USB-C

Frequently Asked Questions

• Question: What should I do if I experience setup issues?
  • Contact the HyperX support team at hyperx.com/support for assistance.
• Question: Is there a risk of hearing damage from using the headset at high volumes?
  • Yes, permanent hearing damage can occur if the headset is used at high volumes for extended periods of time. Please use caution and adjust the volume to safe levels.

Overview

• A Gaming headset
• B Tuck-away boom microphone
• C USB-C charge port
• D Bluetooth multifunction button
• E Status LED
• F Power button
• G 3.5mm headset jack
• H USB charge cable

Charging

• It is recommended that the earbuds and charging case be fully charged before first use.
• The headset will take approximately 2.5 hours to fully charge from low battery.

STATUS LED / CHARGE STATUS

• Breathing Blue: Charging
• Solid Blue: Fully Charged

Bluetooth Setup And Usage

Bluetooth pairing

1. With the headset turned ON, press and hold the Bluetooth multifunction button for 2 seconds. The LED indicator will flash blue.
2. On your Bluetooth-enabled device, search and connect to HyperX Cloud Mini. Once connected, the indicator LED will flash blue every 5 seconds.
   • The headset will take approximately 2.5 hours to fully charge from low battery.

Button Controls

Bluetooth Multifunction Button

Power Button

Connecting And Using Instructions

Connecting with 3.5mm Cable

*Requires 4-pole 3.5mm audio cable (not included)

Using with PC, Chromebook, or Notebook

*Requires 3.5mm headset jack with standard CTIA connection

Using with Mobile Devices

*Requires 3.5mm headset jack with standard CTIA connection or compatible 3.5mm adapter.

Using with Xbox or PlayStation or Nintendo Switch

Tuck-Away Boom Microphone

Questions or Setup Issues

Contact the HyperX support team at: hyperx.com/support

WARNING: Permanent hearing damage can occur if a headset is used at high volumes for extended periods of time.

Declaration of Conformity

Simplified Declaration of Conformity

Hereby, HP declares that the radio equipment is in compliance with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following internet address: www.hp.eu/certificates (search with Model Name) UK only: Hereby, HP declares that the radio equipment is in compliance with the relevant statutory requirements. The full text of the declaration of conformity is available at the following internet address: www.hp.eu/certificates (search with More Name)

Battery TX Power

Battery/TX Power Info

Battery Information

• Headset contain 3.7V, 290mAh
• Li-ion Battery, 1.04Wh

Cannot be replaced by user

Frequency & TX Power Information

• Radio Technology: 2.4GHz
• Maximum Transmit Power EIRP:
  • Headset: < 10 mW

The power delivered by the charger must be between min [0.5] Watts required by the radio equipment, and max [2.5] Watts in order to achieve the maximum charging speed.

FCC STATEMENT

Federal Communication Commission Interference Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference
2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Radiation Exposure Statement

The product complies with the FCC portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. Further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available.

Canada Notices

This Class B digital apparatus complies with Canadian ICES-003.

Industry Canada statement

This device complies with ISED’s licence-exempt RSSs. Operation is subject to the following two conditions:

1. This device may not cause harmful interference
2. This device must accept any interference received, including interference that may cause undesired operation.

Radiation Exposure Statement

The product comply with the Canada portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. Further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available.

Wireless Headset
Regulatory Model: CMI002

©Copyright 2023 HyperX and the HyperX logo are registered trademarks or trademarks of HP Inc. in the U.S. and/or other countries. All registered trademarks and trademarks are the property of their respective owners.

HP Inc. 1501 Page Mill Road, Palo Alto, CA 94304, USA. HP, HQ-TRE, 71025 Boeblingen, Germany. HP Inc UK Ltd, Regulatory Enquiries, Earley West, 300 Thames Valley Park Drive, Reading.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>