HANASS MX100025 Flush Mount Farmhouse Light Instruction Manual
- May 15, 2024
- HANASS
Table of Contents
HANASS MX100025 Flush Mount Farmhouse Light
Product Specifications
- Product Name: HANASS CEILING LIGHT
- Item Number: MX100025
- Customer Service Email: hanass_service@outlook.com
- Social Media: Facebook HANASS
Product Overview
The HANASS Ceiling Light is a stylish and modern lighting fixture designed to brighten up any room with its efficient illumination.
Product Usage Instructions
Assembly and Installation:
- Mounting Unit Installation:
- Use the provided mounting screws to attach the mounting unit to the junction box.
- Wiring Instructions:
- Connect the wires as follows:
- WHITE SUPPLY WIRE to WHITE, MARKED, or RIBBED FIXTURE WIRE using UL LISTED WIRE NUTS.
- BLACK SUPPLY WIRE to BLACK or SMOOTH FIXTURE WIRE.
- BARE COPPER or GREEN GROUND WIRE from supply to BARE COPPER or GREEN FIXTURE GROUND WIRE.
- Canopy Installation:
- Place the canopy over the mounting unit and secure the fixture with the provided cap nuts.
- Bulb Installation:
- Install a compatible bulb (bulb not included).
Frequently Asked Questions
Q: What type of bulbs are compatible with the HANASS Ceiling Light?
A: The HANASS Ceiling Light is compatible with standard E26/E27 base bulbs. Ensure the wattage does not exceed the recommended limit.
Q: Can the HANASS Ceiling Light be dimmed?
A: Yes, the HANASS Ceiling Light is dimmable when used with compatible dimmer switches. Always check the bulb and fixture compatibility for dimming.
Q: Is professional installation required for the HANASS Ceiling Light?
A: While installation can be done following the provided instructions, professional installation is recommended for safety and optimal performance.
- CAUTION: Read instructions carefully and turn the electricity off at the main circuit breaker panel before beginning installation.
- WARNING: If any special control devices are used with this fixture, follow the instructions carefully to assure full compliance with N.E.C. requirements.If there are any questions, contact a qualified electrical contractor.
- WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, and/or other reproductive harm, Thoroughly wash hands after installing. handling. cleaning or otherwise touching this product.
- CAUTION: All glass is fragile, use care when hands glass component(s) and or lamp(s).The installation has to be made by a qualified/registered electrician.
Customer Service email:hanass_service@outlook.com, Facebook: HANASS
CEILING LIGHT, ITEM NO.: MX100025
Accessories
Overview
Assembly: Installation Instructions
- STEP 1
Use the mounting screws to attach the mounting unit to the junction box
- STEP 2
Wiring Diagram
- STEP 3
Place the canopy over the mounting unit and secure the fixture with the cap nuts.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>