HANASS MD89437 Pendant Light Fixtures Farmhouse Wood and Glass Pendant Lighting Instruction Manual
- May 15, 2024
- HANASS
Table of Contents
Assembly Installation Instructions
CATION Read instructions carefully and turn electricity off at main
circuit breaker panel before beginning installation.
WARNIN If any special control devices are used with this fixture, follow
the instructions carefully to assure full compliance with N.E.C.
requirements.If there are any questions, contact a qualified electrical
contractor.
ARNIN This product contains chemicals known to the State of California to
cause cancer, birth defects, and/or other reproductive harm, Thoroughly wash
hands after installing. handling. cleaning or otherwise touching this product.
CATION All glass is fragile, use care when hands glass component(s) and or
lamp(s).Istallation has to be made by a qualified/registered electrician.
Customer Service
email:hanass_service@outlook.com
PENDANT LIGHT, ITEM NO.: MD89437
Accessories
| Hardware 1
---|---
| Metal ring
| Wood
| Glass Diffuser
| Socket Ring
| Mounting Screws
| Wire Nuts
| Mounting Unit
| Cap Nuts
| Hardware Tube
| Ceiling Plate
Overview
STEP 1
Use the mounting screws to attach the mounting unir to the junction box
STEP 2
Wiring Diagram
STEP 3
Place the canopy over the mounting unit and secure the fixture with the cap
nuts.
STEP 4
Install bulb (not included)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>